THIS DEAL IS CLOSED. THANK YOU FOR MAKING IT A HUGE K&N SELL OFF!


I have a few cases of K&N RE0930 filters on the way. They are 6" long and 6" wide at the base.

I bought old stock from DC Sports who used to use K&N for their DAC intake kits. They are stamped with the DC logo on them.

http://www.knfilterchargers.com/sear...x?Prod=RE-0930

$30 shipped via 8 day parcel post - no insurance available
$32 shipped via 3 day air with delivery confirmation

Regards,
Bryan
bryan@berktechnology.com

which intakes and for what gen are the these going to fit?

I have the Injen CAI on my 04' Maxima. Will it fit the Injen CAI? Thanks in advance.

It should fit an Injen but I'm not 100% sure. You just have to measure the width of the Injen, if you have the space to fit it then you'll be fine. The filter inlet is the same size, 3".

This should fit most of the intakes out there. The only one where they may be a fitment issue is Place Racing because the fender space is limited. If it is a under hood intake then you will not have any problems.

will this fit the 97 i30 (stock)?

You take paypal?

The injen filter for the 04 max has a 3 1/2 inch filter so it wont fit. unless you use just the mid pipe and make your injen a short ram like I did.

Yes, "paypal@berktechnology.com"

no, it will not. If you want the stock replacement filter then you have to go with the 33-2031-2. $40 shipped.

Are you sure the filter ID is 3.5"??

Im possitive, the mid pipe is 3 inch but the opening on the 2nd piece that runs to the fender well gets wider at the end. I might possibly be ordering one of these filters though because im running my injen as a short ram.

How about some weapon r short rams, will it fit? I don't know what diameters are so if any posts it'll be good to know.

as long as your intake pipe is a 3" diameter then it will fit. Here's how to find the diameter of the pipe without taking it off. Wrap a piece of string around it to measure the circumfrence of the pipe. Divide by "pi" or 3.14. That is the diameter of your pipe.

Do you have any left?

I have 31. Once these are gone, they are gone. I will not be getting any more of these at this price.

payment sent!

thanks, got it.

all of them are going out today.

Those pics I promised. You will get exactly what you see. There are not retail boxed. They are OEM filters that were made for DC Sports.

does anyone know if these will fit frankencar intake for 02? I'll take one if it fits, thx

i got a generic CAI off ebay for a 96 max will this fit?

Does it fit a 2000 maxima with a stock intake? I guess I would need a 3" adapter right?

Yes it will.

It should but I am not 100% sure. If your intake inlet is 3" then yes, this will fit. Make sure that you have clearance for the filter.

You should just go with our basic intake system which comes with all of the neccesary brackets, hardware, instruction manual etc. I can include this same filter or a K&N RU-2820. The choice is your's.

Feel free to give us a call.

Regards,
Bryan 949-679-8618

payment sent.
my paypal address is
tapwr3000@hotmail.com
thx

Got it, thank you. The filter will go out tomorrow.

Regards,
Bryan

What's the difference between the RU-2820 and this one?

Just the shape of the filter. The actual size of the filter is about the same.

The RU2820 is a cylinder shaped filter and the RE0930 is a cone shaped filter.

Just sent paypal

speeds5@aol.com

got it, thank you. already sent it out.

Are these still available? Please let me know. Thank you.

yes, still available.

Still some available???

Yes, will not run out of these anytime soon.

Payment sent.

Payment sent also.

Was it determined wether or not these fit the Injen CAI?

Here are the dimensions:

RE-0930 Product Specifications
Product Style: Round Tapered Universal Air Filter
Base Outside Diameter: 6 in (152 mm)
Flange Inside Diameter: 3 in (76 mm)
Flange Length: 1.75 in (44 mm)
Flange Type: Centered
Height: 6 in (152 mm)
Top Outside Diameter: 4.625 in (117 mm)
Top Style: Rubber
Top Material/Finish: None
Filter Re-Oiling Amount: 1.27 oz (38 ml)
Flanges: 1
Weight: 1.6 lb (0.7 kg)
Product Box Length: 6.25 in (159 mm)
Product Box Width: 6.25 in (159 mm)
Product Box Height: 10.81 in (275 mm)

Guys,

Bryan is the best. I ordered my filter and it came as described BRAND NEW in record time. He is great to deal with and an excellent business man. I am going to order another soon as backup for my CAI. Best prices I have seen and I recommend him to anyone who need a K&N.