Group Deals / Sponsors Forum Find out more information on group deals that are going on for Maxima parts from our Sponsors.

VQ 30 and 35 4th and 5th gen Stainless Steel Clutch lines !!

Thread Tools
 
Search this Thread
 
Old Oct 3, 2005 | 05:20 PM
  #561  
makavelisk's Avatar
Supporting Maxima.org Member
iTrader: (5)
 
Joined: Jun 2002
Posts: 1,397
Got the new one in Derrick and it looks like it fits perfect.....thanks.
Old Oct 3, 2005 | 08:37 PM
  #562  
PoLo's Avatar
2-Wheelin it...
iTrader: (7)
 
Joined: Aug 2000
Posts: 3,147
Fyi, i bought this cable in the first batch and just found time to install it. i did it last nite and i must say, it's a PITA to get to the lower section. it's a tough area to fit your hand. i will say this, it became 100x's easier by removing the upper radiator hose. yes some antifreeze will spill out, but who cares. just add some more to your reservoir tank. removing that and the intake opens up lots of space.

anywho, i replaced it and by the time i had done it, the clutch fluid had emptied, so i had to bleed it. because we were trying to use the bleeding kit, it didn't work as easy. i'll be honest, it is much easier the old fashioned pump n release method. once we switched to that method, it was done in 15 minutes.

and now, the feedback. i can only say there is one improvement over the OEM line. my problem prior to this was that my engage point changed all the time. now it doesn't. in one day i have noticed that my clutch disengages at the exact same point everytime.

one adjustment i have to get used to as well is my disengagement point is higher now. i assume this to be because the rubber OEM line, by expanding, allowed the clutch to disengage earlier, but now with a tight cable, it takes more of a release to disengage it. hope that makes sense. it's not a bad thing, just something that has been noticed. good luck with your installs.
Old Oct 4, 2005 | 01:51 PM
  #563  
derrick's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (23)
 
Joined: Feb 2003
Posts: 1,252
From: Buena Park, CA
Cool, thanks for the feedback so far guys! Deal will run til there is no more interest!
Old Oct 6, 2005 | 08:39 AM
  #564  
boommer's Avatar
Junior Member
iTrader: (2)
 
Joined: Feb 2004
Posts: 94
Do you think one of these lines will work on a G20 (P11)?
Old Oct 15, 2005 | 02:38 PM
  #565  
jcy98maxse's Avatar
Turbo is too much fun!
iTrader: (8)
 
Joined: Apr 2002
Posts: 2,515
Derrick- do you have any available now?
Old Oct 15, 2005 | 10:51 PM
  #566  
kamski's Avatar
.org extraordinaire
iTrader: (9)
 
Joined: Apr 2005
Posts: 2,618
6th Gen

Do thease clutch lines work on the sixth gen?
Thanks,
Kam
Old Oct 28, 2005 | 12:29 PM
  #567  
derrick's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (23)
 
Joined: Feb 2003
Posts: 1,252
From: Buena Park, CA
all pms and emails responded to, deal is still on guys!

boommer: i have no idea if it will work on that car

jcy: yours is shipping out with today's mail

kam: these particular lines do not, however I do have the 6th gen line in stock and it is the same price, just pay whenever you are ready!

thanks again to everyone who has ordered!
Old Nov 12, 2005 | 08:41 PM
  #568  
derrick's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (23)
 
Joined: Feb 2003
Posts: 1,252
From: Buena Park, CA
ttt

did any one pay and not receive their line yet? I had a little mixup with my files last week and want to make sure that everyone got their line!
Old Nov 16, 2005 | 05:59 AM
  #569  
infinitiblast's Avatar
Senior Member
iTrader: (2)
 
Joined: Oct 2000
Posts: 2,166
Hey Derrick my clutch just went out this morning and I'd need to replace it this weekend. I wanted to see if I can order a line today and have it here by this weekend. I can pay overnight or two day fees as well. Thanks
Old Nov 28, 2005 | 03:53 PM
  #570  
samsonite's Avatar
Member
 
Joined: Apr 2003
Posts: 87
Derrick, have you got any of my messages? I am in a hell of a bind here brother. I need a car badly. I am still willing to pay overnight charges if possible. Let me know whats up.
Old Nov 29, 2005 | 08:12 AM
  #571  
slag's Avatar
Member
 
Joined: Jun 2003
Posts: 285
Originally Posted by derrick
ttt

did any one pay and not receive their line yet? I had a little mixup with my files last week and want to make sure that everyone got their line!

Yes. I paid on November 17th and have not received my ss line yet.

Shipping was to Lawrence, KS.

Nov. 17, 2005 Payment To Endless Collectibles Completed ... -$25.00 USD
Old Dec 2, 2005 | 07:07 AM
  #572  
slag's Avatar
Member
 
Joined: Jun 2003
Posts: 285
Im half tempted to cancel my order and do a chargeback in paypal. We have up to 3 weeks to do so and I'm on my second week of NO item, NO email from Derrick, NO post here from him, NO communication of any kind in regards to my order when he solicited feedback from us in this thread just recently.

I'm giving it another day and then will do a chargeback if I dont hear from him.
Old Dec 2, 2005 | 07:58 AM
  #573  
VQuick's Avatar
Chassis Freak
iTrader: (17)
 
Joined: Apr 2002
Posts: 4,581
From: Portland, Ore.
I understand your concern but derrick has sold probably 100 of these lines since the deal started and he's not out to screw people. Maybe he had a family emergency or something like that. But yeah, two weeks is a long time to be incommunicado if you're running a deal like this.
Old Dec 4, 2005 | 07:36 PM
  #574  
derrick's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (23)
 
Joined: Feb 2003
Posts: 1,252
From: Buena Park, CA
hey everyone,

i am not trying to screw any one here! Here is an update though:

I printed out some shipping labels on the 22nd of November and emailed tracking #'s to everyone. I also sell lines on the 240 forums, and at the time i had a mistake in my inventory and was actually out of lines. i ordered another set immediately and posted on the 240 forums that i would be slightly delayed on the next shipment. in my mind i thought that i had already posted on the org also, but i didn't.

I have been responding to pms and emails, but many emails have been blocked with the reply "your email has been selected by our system as spam and is being filtered". you guys gotta turn this off or something.. i can't get through!

Anyways, sorry for the lag but all orders have shipped out, and if you paid within the last 4 days they are shipping out on this coming Monday. Thank you for your patience!

And you will be receiving emails when I send the lines out... along with tracking #'s. Please be patient guys, and I do sincerely apologize for that delay, the miscount in inventory was entirely my fault.
Old Dec 6, 2005 | 11:05 AM
  #575  
slag's Avatar
Member
 
Joined: Jun 2003
Posts: 285
I started the proceedings on Sat morning with paypal for a chargeback.

Saturday late afternoon the part was in my mailbox. Date on the package was 11/28. I paid on 11/17, 11 days earlier.

I have since cancelled my chargeback with paypal.

On a side note, the only spam filters my mailbox has are if you are sending a virus and it recognizes it. Then it still forwards the email onto me and tells me its infected and quarantines it. I did not receive a pm nor an email from Derrick.

Thanks for the part, will put it on when the temp goes above freezing.
Old Dec 6, 2005 | 05:02 PM
  #576  
derrick's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (23)
 
Joined: Feb 2003
Posts: 1,252
From: Buena Park, CA
sorry about that delay slag... i really don't mean for packages to take so long, it's just things come up sometimes and make me lag.. thanks for understanding!
Old Dec 9, 2005 | 01:35 PM
  #577  
maxkill...'s Avatar
Donating Maxima.org Member
 
Joined: Sep 2004
Posts: 5
got mine today. I'll be putting it in next week sometime. thanks for the quick shipping.
Old Dec 16, 2005 | 05:24 PM
  #578  
samsonite's Avatar
Member
 
Joined: Apr 2003
Posts: 87
derrick,
give me my money back PLEASE
Old Jan 7, 2006 | 06:45 AM
  #579  
KRRZ350's Avatar
Supporting Maxima.org Member
iTrader: (29)
 
Joined: Oct 2005
Posts: 4,572
From: Middleboro/Carver, Ma
Payment Sent, thanks
Old Jan 10, 2006 | 05:15 AM
  #580  
DUKEE's Avatar
Donating Maxima.org Member
iTrader: (8)
 
Joined: Apr 2004
Posts: 297
is the GD still on?
Old Jan 12, 2006 | 10:46 AM
  #581  
derrick's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (23)
 
Joined: Feb 2003
Posts: 1,252
From: Buena Park, CA
hey dukee, the deal is still good to go, thanks!
Old Jan 12, 2006 | 11:17 AM
  #582  
NissanMan97's Avatar
Supporting Maxima.org Member
iTrader: (5)
 
Joined: May 2005
Posts: 728
From: Louisville KY
How much is everything to 40220? thanks for the help

B
Old Jan 23, 2006 | 03:32 PM
  #583  
derrick's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (23)
 
Joined: Feb 2003
Posts: 1,252
From: Buena Park, CA
hey nissanman, all info is on the first page of this thread, thanks!
Old Jan 23, 2006 | 03:35 PM
  #584  
kingrukus's Avatar
no more maxima...
iTrader: (41)
 
Joined: Oct 2001
Posts: 4,294
From: Toronto, ON
I bought this thing back in 2004 and I haven't installed it yet.
Old Jan 24, 2006 | 09:50 AM
  #585  
86maxima96's Avatar
I Broke OT
iTrader: (10)
 
Joined: Apr 2005
Posts: 4,665
Originally Posted by derrick
hey nissanman, all info is on the first page of this thread, thanks!

so those prices still stand? good to know. thanks.
Old Jan 24, 2006 | 10:28 AM
  #586  
derrick's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (23)
 
Joined: Feb 2003
Posts: 1,252
From: Buena Park, CA
86max yup, prices are all the same still!
Old Jan 26, 2006 | 01:27 PM
  #587  
96nismomaxi's Avatar
.org window licker
iTrader: (17)
 
Joined: Dec 2004
Posts: 600
From: Mandeville,LA
still available???
Old Jan 29, 2006 | 10:25 PM
  #588  
96nismomaxi's Avatar
.org window licker
iTrader: (17)
 
Joined: Dec 2004
Posts: 600
From: Mandeville,LA
can u still get the lines for 25????
Old Jan 31, 2006 | 10:39 AM
  #589  
jac121479's Avatar
Senior Member
iTrader: (10)
 
Joined: Jan 2005
Posts: 747
From: Pensacola, FL
payment sent...
Old Jan 31, 2006 | 04:02 PM
  #590  
derrick's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (23)
 
Joined: Feb 2003
Posts: 1,252
From: Buena Park, CA
Hi,

Yes deal is still on and the price is still $25 shipped. Thanks!
Old Feb 5, 2006 | 11:24 AM
  #591  
ACEEMaxima's Avatar
Senior Member
iTrader: (8)
 
Joined: Aug 2004
Posts: 730
From: Baton Rouge, la
Payment sent
Old Feb 7, 2006 | 08:57 AM
  #592  
DandyMax's Avatar
3.5 in the works
iTrader: (7)
 
Joined: Jun 2004
Posts: 2,477
From: Ontario, Canada
derrick did you get my PM?
Old Feb 8, 2006 | 03:01 PM
  #593  
4x4Max's Avatar
Supporting Maxima.org Member
iTrader: (12)
 
Joined: Feb 2004
Posts: 2,577
---nevermind-----
Old Feb 10, 2006 | 03:12 PM
  #594  
derrick's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (23)
 
Joined: Feb 2003
Posts: 1,252
From: Buena Park, CA
Next batch is shipping 2/13/06 sorry for the short delay!
Old Feb 10, 2006 | 05:36 PM
  #595  
MCE's Avatar
MCE
Supporting Maxima.org Member
 
Joined: Jan 2004
Posts: 129
SS Clutch Line

Paypal sent yesterday for 01 max ss clutch line.

Mark
Old Feb 13, 2006 | 08:26 AM
  #596  
asianmusketeer's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2001
Posts: 180
how many days will it takes to ship?
Old Feb 13, 2006 | 09:01 AM
  #597  
zazon's Avatar
Senior Member
iTrader: (4)
 
Joined: Feb 2004
Posts: 678
Payment Sent!

Looking forward to recievng, thanks derrick
Old Feb 13, 2006 | 04:41 PM
  #598  
DandyMax's Avatar
3.5 in the works
iTrader: (7)
 
Joined: Jun 2004
Posts: 2,477
From: Ontario, Canada
Payment sent just now. Thanks.
Old Feb 15, 2006 | 12:34 PM
  #599  
MCE's Avatar
MCE
Supporting Maxima.org Member
 
Joined: Jan 2004
Posts: 129
ss clutch line

Derrick

Just wondering if you got my e-mail? The shipping address on the tracking site is missing part of the info. " 14555 South Avenue 4E "

Tracking # 9101805213907103785305

Thanks, Mark
Old Feb 16, 2006 | 02:40 PM
  #600  
Captain Obvious's Avatar
Newbie - Just Registered
 
Joined: Dec 2005
Posts: 11
You mentioned selling stainless lines on the 240 forums too, are they the same price and are you still selling those? If so, I'll be buying one for a 240 and my 02 Max soon. Thanks.



All times are GMT -7. The time now is 07:29 AM.