Group Deals / Sponsors Forum Find out more information on group deals that are going on for Maxima parts from our Sponsors.

PFI Turbo kit: October Blowout

Thread Tools
 
Search this Thread
 
Old Sep 29, 2004 | 09:01 PM
  #1  
turbo97SE's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Mar 2002
Posts: 1,035
From: Fort Collins, Colorado
PFI Turbo kit: Nov-Dec Special

PFI special for through January 2005:

Standard Kit - Intercooled kit $3999 (Please email for best latest pricing)
Here's what's in the kit:

1. Brand New T4/TO4E turbo with polished compressor housing and LIFETIME warranty (Ball-bearing upgrades available)
2. Tial 38mm external wastegate
3. Complete exhaust pipes
4. Stainless Steel Oil line
5. Oil dump.
6. exhaust flanges to and from turbo
7. fuel pressure regulator
8. T-bolt Clamps, connectors, fittings etc.
9. Spearco intercooler
10 Powdercoated intercooler piping
11. Cone Filter
12. Battery Relocation Kit

NOTE: Shipping is NOT included (a 50% discount on shipping applies to donating Maxima.org enthusiasts)

The kit as it stands is capable of supporting 280HP. This kit has been proven to 350HP without a variable intake. An additional fuel pump and clutch are required to hit this figure. This is the most tried and tested kit out there. There are more than 15 cars with this kit out there. 5 of these people have thrown out their S/C in favour of this kit! This is for manual transmission cars only. Years covered : 99-2001

Please allow 6 weeks for delivery.

AEM engine management will be available by March 2005

Please email me at turbo97se@gmail.com for any further questions. Happy Boosting!
Old Oct 16, 2004 | 08:36 PM
  #2  
abakalen's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Mar 2004
Posts: 140
From: Glenolden, PA
Originally Posted by turbo97SE
2002 and 2003 can be done but we need an actual car. The turbo itself is not a problem. We just need a test candidate.
Turbo97SE,
Just wondering if the 3.5L turbo kit has been done already for 2002 and 2003 maximas, or do you still need a test candidate.
How much would it cost?
Thanks.
Old Oct 16, 2004 | 10:42 PM
  #3  
Supermax95's Avatar
Senior Member
iTrader: (2)
 
Joined: Oct 2002
Posts: 1,263
how about a bov, intake piping or fmu?
Old Oct 16, 2004 | 11:44 PM
  #4  
callmezeus's Avatar
Supporting Maxima.org Member
 
Joined: Jan 2004
Posts: 213
From: Bay Area CA
Originally Posted by Supermax95
how about a bov, intake piping or fmu?
These are good questions.
Old Oct 17, 2004 | 07:37 AM
  #5  
slimer's Avatar
A couple of Blaxxx's? Lawls.
iTrader: (13)
 
Joined: May 2002
Posts: 5,529
guys, don't really reply unless you are very serious about buying.

there is plenty of info on this board and i'm sure nigel won't have a problem answering your questions.

just make sure that you know you want to buy the kit.

it is a very good/solid kit and nigel, good luck with the group deal.
Steve
Old Oct 18, 2004 | 09:42 PM
  #6  
callmezeus's Avatar
Supporting Maxima.org Member
 
Joined: Jan 2004
Posts: 213
From: Bay Area CA
I just got an email reply. What nice customer service. I'm suprised no one is jumping at this deal! If I were a manual I'd be all over it.
Old Oct 18, 2004 | 09:53 PM
  #7  
96_vqmax's Avatar
Supporting Maxima.org Member
iTrader: (16)
 
Joined: Aug 2002
Posts: 1,601
Old Oct 18, 2004 | 10:21 PM
  #8  
abakalen's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Mar 2004
Posts: 140
From: Glenolden, PA
any words regarding 02 kit for the 3.5L engine?
Old Oct 21, 2004 | 12:04 AM
  #9  
Supermax95's Avatar
Senior Member
iTrader: (2)
 
Joined: Oct 2002
Posts: 1,263
so....how do you expect people to buy something from you if you don't answer their questions?(not trying to start a flame war).
Old Oct 21, 2004 | 12:08 AM
  #10  
foodmanry's Avatar
Da Roller Coaster!
iTrader: (15)
 
Joined: Jan 2002
Posts: 3,913
From: Los Angeles, CA
Originally Posted by Supermax95
so....how do you expect people to buy something from you if you don't answer their questions?(not trying to start a flame war).
Refer to the first post....he requested to be e-mailed with any further questions. Don't be jumping to conclusions.
Old Oct 21, 2004 | 12:11 AM
  #11  
Supermax95's Avatar
Senior Member
iTrader: (2)
 
Joined: Oct 2002
Posts: 1,263
yes, but im also trying to let everyone else see what is missing from the kit, so they know what else they need to buy with it.
Old Oct 21, 2004 | 12:53 PM
  #12  
foodmanry's Avatar
Da Roller Coaster!
iTrader: (15)
 
Joined: Jan 2002
Posts: 3,913
From: Los Angeles, CA
Originally Posted by Supermax95
yes, but im also trying to let everyone else see what is missing from the kit, so they know what else they need to buy with it.
That's something you could have said earlier. I suggest sending him an e-mail and ask him to comment on what you want people to see in this thread. Don't blow his **** out complaining he's not letting anyone know anything, very rude and unprofessional.
Old Oct 26, 2004 | 08:07 PM
  #13  
Supermax95's Avatar
Senior Member
iTrader: (2)
 
Joined: Oct 2002
Posts: 1,263
As i said earlier "(not trying to start a flame war)", so lets just drop it.
Old Oct 30, 2004 | 11:20 PM
  #14  
maximariceboi's Avatar
Supporting Maxima.org Member
iTrader: (32)
 
Joined: Jun 2004
Posts: 2,354
oman..i hope there will be another deal like this after the winter..hopefully gettin the black 99 5spd wed..another project car to do =]
Old Oct 31, 2004 | 12:35 PM
  #15  
Wolfgraen's Avatar
Junior Member
 
Joined: Jul 2003
Posts: 50
I think he failed to put on here what year models this kit is meant for.
Old Nov 23, 2004 | 11:12 PM
  #16  
turbo97SE's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Mar 2002
Posts: 1,035
From: Fort Collins, Colorado
Bump for new SPECIAL through end of the year ... Garrett GT35R available for BB upgrade price! That is a $400 savings over regular price
Old Nov 24, 2004 | 01:55 AM
  #17  
SYCEFIRO's Avatar
Senior Member
iTrader: (10)
 
Joined: Aug 2000
Posts: 2,065
[QUOTE=turbo97SE] Years covered : 99-2001 [QUOTE]


And you have a 97?

SY
Old Nov 24, 2004 | 02:54 AM
  #18  
callmezeus's Avatar
Supporting Maxima.org Member
 
Joined: Jan 2004
Posts: 213
From: Bay Area CA
[QUOTE=SYCEFIRO][QUOTE=turbo97SE] Years covered : 99-2001


And you have a 97?

SY
I think it is because he is showing a PFI sponsord car. A car that had the PFI turbo installed in the PFI shop more than likely. I think gains for the newer 00-01 would be better. Regardless this is a good deal. Too bad I won't be able to do anything to my car till the summer.
Old Nov 25, 2004 | 08:29 AM
  #19  
laylow1988's Avatar
Senior Member
iTrader: (2)
 
Joined: Jun 2004
Posts: 657
give me acouple of months just got a second job hopefully you will do this deal again getting a mevi first than ecu




Old Dec 14, 2004 | 07:50 PM
  #20  
MDeezy's Avatar
Senior Member
iTrader: (27)
 
Joined: Feb 2004
Posts: 33,701
From: Atlanta
Originally Posted by laylow1988
give me acouple of months just got a second job hopefully you will do this deal again . . .

I hope soo too, hot damn I hope so.
Old Jan 2, 2005 | 01:34 PM
  #21  
claudiusmaximas's Avatar
Senior Member
 
Joined: Apr 2004
Posts: 328
damn that would be a nice deal to take...too bad no $$$ right now
Old Jan 4, 2005 | 07:13 PM
  #22  
maxima_kid's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Apr 2004
Posts: 889
I need a T3 inlet pipe and outlet pipe by themselves if possible ...
Old Jan 4, 2005 | 07:32 PM
  #23  
mjg's Avatar
mjg
Senior Member
 
Joined: Oct 2002
Posts: 1,554
if there is ever an 02 kit for similar pricing, i will purchase it...somehow.
Old Apr 7, 2006 | 01:54 PM
  #24  
sean05's Avatar
Senior Member
iTrader: (13)
 
Joined: Aug 2003
Posts: 2,760
saw this link in a sig. are these prices still the same or are there different kits now? any info would be helpful. thanks
Old Apr 8, 2006 | 07:50 AM
  #25  
03maxima1's Avatar
Senior Member
iTrader: (13)
 
Joined: Jul 2005
Posts: 1,512
Is there a kit available for the 02-03 maxima or not?
Old Apr 8, 2006 | 11:27 AM
  #26  
sean05's Avatar
Senior Member
iTrader: (13)
 
Joined: Aug 2003
Posts: 2,760
bump for seller...
Old Apr 15, 2006 | 06:06 AM
  #27  
sean05's Avatar
Senior Member
iTrader: (13)
 
Joined: Aug 2003
Posts: 2,760
bump im interest i guess this guy doesnt want to make any money
Old Apr 15, 2006 | 07:23 PM
  #28  
Maxi113's Avatar
Senior Member
iTrader: (3)
 
Joined: Apr 2004
Posts: 1,702
Wow I'd jump on this too..Well depending on snh...He should lower prices since it's not October anymore
Old Apr 16, 2006 | 07:09 PM
  #29  
blackonblue's Avatar
Member
 
Joined: Apr 2006
Posts: 35
Are there any kits for 95's
Old Apr 16, 2006 | 07:20 PM
  #30  
slimer's Avatar
A couple of Blaxxx's? Lawls.
iTrader: (13)
 
Joined: May 2002
Posts: 5,529
its the same kit on www.turbokits.com
Old Apr 18, 2006 | 02:35 AM
  #31  
SEmy2K2go's Avatar
Go BUCKS!!!
iTrader: (10)
 
Joined: Aug 2003
Posts: 9,557
From: Delaware, OH-IO
Guys. You realize this thread is almost 2 years old. Maybe send him a PM as he may not be checking this thread regularly.
Old Nov 17, 2006 | 10:35 AM
  #32  
MaxBoost925's Avatar
Drug Money
iTrader: (33)
 
Joined: Aug 2005
Posts: 5,449
From: USA
Will this kit fit on a 2000/2001? The VIAS and the throttle body are different, in the stillen SC kits, the charge piping is different so I don't know if this intercooler piping can fit in a 5th gen.

Can you clear this up?
Old Nov 17, 2006 | 06:08 PM
  #33  
ghostmax301's Avatar
Senior Member
iTrader: (7)
 
Joined: Oct 2002
Posts: 2,524
wow you dug this one up...lol
Old Nov 17, 2006 | 06:23 PM
  #34  
The Law's Avatar
I R The Law
iTrader: (39)
 
Joined: Apr 2004
Posts: 10,094
From: Sacramento, CA
Originally Posted by MaxBoost925
Will this kit fit on a 2000/2001? The VIAS and the throttle body are different, in the stillen SC kits, the charge piping is different so I don't know if this intercooler piping can fit in a 5th gen.

Can you clear this up?
i don't think you should be inquiring about things that you can't afford nor need at the moment unlike other things that should be on the top of your list....like having a working tranny....
Old Nov 24, 2006 | 12:33 AM
  #35  
Rowan's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Nov 2002
Posts: 1,634
grave diggers....
Old Nov 25, 2006 | 08:41 PM
  #36  
absoundlab
Guest
 
Posts: n/a
this thread is over 2 years old
Old Nov 25, 2006 | 10:33 PM
  #37  
turbo97SE's Avatar
Thread Starter
Supporting Maxima.org Member
iTrader: (3)
 
Joined: Mar 2002
Posts: 1,035
From: Fort Collins, Colorado
Hehe .. this is a very old thread! To answer your question though, a longer pipe to the TB is provided if you state you are 00/01 model. We have never put this on a 00/01 but there are many who have. The longer pipe has to be cut to length which is pretty straightforward.
Old Nov 27, 2006 | 09:15 PM
  #38  
maxima_kid's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Apr 2004
Posts: 889
Haha, I remember this thread ... I also run the kit. I dont recommend
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
Jan 4, 2024 07:01 PM
aw11power
Supercharged/Turbocharged
161
Oct 10, 2021 04:57 AM
trsandrew
7th Generation Maxima (2009-2015)
17
Apr 8, 2016 06:45 PM
trsandrew
Group Deals / Sponsors Forum
2
Oct 25, 2015 02:47 PM
09maxshawn11
5th Generation Maxima (2000-2003)
5
Sep 30, 2015 10:28 AM




All times are GMT -7. The time now is 07:53 AM.