Mark97SE

iTrader: (2)

I just called iRotors and they said that Matt's GD is still going. For those getting Matt's front and rear BBK's this is a good way to get the rotors that you need, as they will sell us the 300ZX rear rotors at a reduced price too!

Matt's original thread:
http://forums.maxima.org/showthread.php?t=300677

Mark97SE

iTrader: (2)

Here is the good info from Matt's thread:
Just got word back from the rotor guys on all of the parts.. here's the pricing email they sent me for everything...
FYI, this is through iRotors.. (www.irotors.com)


All brake rotors could be ordered cross drilled only, slotted only, or cross drilled/slotted, as well as blanks. The rotors will be zinc plated silver for rust protection.
1989-1999 Maxima Front Brembo - $109/pair
2000-2001 Maxima Front Brembo- $109/pair
2002-2003 Maxima Front BPI- $109/pair
1989-1993 Maxima Rear Brembo- $99/pair
1994-2003 Maxima Rear Brembo- $99/pair
2004 Maxima Front BPI- $159/pair (Powdercoated Black w/ Black Zinc-see the pics at the top of the thread)

Those prices are for slotted, drilled, or S&D. for Blank rotors, you can subtract $20 per pair (fronts or rears. Both would be $40 off)

Shipping costs depends on the zip code. We could drop ship the order or simply send the order directly to you. (meaning me- Matt.. no thanks. I don't want a truckload of rotors. no room in the garage! please drop ship! )

This is a substantial price break over their regular prices. look on their website and it shows the fronts at $129 a pair PLUS $25 for zinc plating. so that's roughly $50 off per set (30%!!)- Matt


We also carry a complete line of Axxis Metal Master semi metallic pads and Axxis Ultimate ceramic pads.
Front Axxis Metal Master- $45
Rear Axxis Metal Master- $40
Front Axxis Ultimate- $50
Rear Axxis Ultimate-$45

Shipping is INCLUDED for the prices of the brake pads anywhere in the 48 states.


Complete set of front/rear stainless steel brake lines are available for
1989-2003 Maxima for $85 shipped.



At this point, I don't see much reason in having you guys order this stuff through me. you can go directly through them and have them shipped directly to you. That takes me out of the middleman. less work on my part, less overhead for me, and shorter wait times on getting all your parts. (Shipping rotors from them to me, then me to you at $20 a set is stupid and costs YOU money.).
.

Mark97SE

iTrader: (2)

They are selling the 300ZX rear rotors for $119/pair.
If you want them with the black zinc coating to match the fronts, it is $20 more.
Shipping is reasonable too. 4 rotors from CA to VA is $30.

Enjoy...

limsandy

iTrader: (1)

Is Blehmco having discounts on front BBK also or just the rear?


~limsandy

MaXtUneD

iTrader: (2)

Are these rotors for the stock size and the bbk??

SeaFoam2DMax

So, if i call up iRotors to make an order, do I have to let them know I'm part of a GD or are these the regular prices?

akaxmrxhammer

price check on 04 max cross drilled/slotted for front and rear. thanx

Mark97SE

iTrader: (2)

Look people, I am the newbie here so I shouldn't be the one to start flaming people. Don't ask questions until you have read ALL the posts and read the ORIGINAL THREAD. Almost everyone of your questions could have been answered without wasting my time. I didn't set up this group deal, I am only letting people know that it is still going.

That being said, I will address your questions:

limsandy- Matt's group deal has expired; if you want to know, ask him.

MaXtUneD- '04 Max fronts and 300ZX rears are for the BBK, all others are stock sizes

kcgc187- If you looked at their website or the original thread you would see that these are not the stock prices. As for letting them know, "Call them and mention the group deal that Matt Blehm set up for Maximas (I don't remember if I mentioned .org specifically to them). just make sure all the prices match up to the ones posted above, and you're good."(from original thread)

akaxmrxhammer- Why would I give you a price check? "At this point, I don't see much reason in having you guys order this stuff through me. you can go directly through them and have them shipped directly to you." (2nd post of THIS THREAD! (Originally from Matt))

SeaFoam2DMax

You could have easily said the the things above without the attitude. Next time you haave a problem take it to PM and don't be a d!ck

Deckdout2

iTrader: (151)

i'm gonna have to shutdown my pc.....this thread's getting a little warm in here!!! :-)

maximo-SE

iTrader: (7)

simple answers to simple questions would have been suffice buddy. If you you we are wasting your time then why post?

Mark97SE

iTrader: (2)

I am sorry that I was a bit short; I wasn't trying to be a ****, I'm just having a bad day. I posted this to help others out and save them some money. I had assumed that people would read the threads and use some initiative on their own. I answered the questions because I figured that it would save some time for the next guy who wants to ask a question without reading the thread

Jeff92se

iTrader: (82)

I think he was frustrated because it probably took him a good 15-30 min to write/find all the information down for everyone and be as complete as possible. And you probably took 30 sec to ask a question that could have been answered just by reading the information he so kindly provided. I'd be peeved also.

You could have taken your reply to PM and taken your own advice.