I just purchased these on your site and sent you a PM.

Thanks,
David

 

Can you give me a total for the Powerslot and EBC slotted/drilled fronts for a 95 maxima shipped to 91942? Thanks.

 

Sure, sending you a quote now.

 

Hey Jeff, its that time again for me to give you more money.....

I need front brembo blanks for my 03 Maxima. Can you recommend compatible brake pads for those rotors? Ive used raybestos on the brembos and it wore faster than normal.

I heard that some pads are not compatible with specific rotors. If the axxis pads work well with the brembos then I rather buy from you.

Let me know!

 

Yea, we can definitaly help you out. I guess it depends on the type of driving you do as to which pad I would recommend. Are you looking for better performance? Or just stock performance and low dust? Or a super long lasting pad? Lemme know what you are thinking...

Thanks again,
Jeff

 

Hey Jeff, im looking for stock with low dust.

 

Can you PM me a price for 1998 Mustang Cobra slotted 13" Brembo rotors?

 

I'd recommend any of these pads for you:

PBR/Axxis Deluxe Plus Front Pad Set - $32
Mintex Front Pad Set - $35
Sumitomo (OEM) Front Pad Set - $40
Hitachi (OEM) Front Pad Set - $42
Akebono Pro-ACT Ceramic Front Pad Set - $52

All these are in-stock

 

maximabebe - Sent you a PM

 

Do you have brembo blank for 2004 maxima? shipping to 03061

Thanks

 

Hey Jeff, give me a quote on the Front Brembo Blanks and the PBR/Axxis Deluxe Plus Front Pads. Shipped to 02128. Thanks

 

saraara - Sent you a PM
maximo-SE - Sending you a PM now

 

Replied to your PM, can you please check your PM?

 

can you give me a price for front and rear brembo blank with pbr/axxis pads deluxe (F+R) shipped to 11204?

 

Price for 300ZX, Q45/J30 front rotors? (Brembo blank) Thanks.

 

Sure can!! What year is your Maxima though?

 

Think I've been pming you, right?

Thanks,

Jeff

 

oops, its an 02 max.

 

DJ2Max - Need to know the production date of your 2002 Maxima. Sent you a PM too. Let me know

 

Question about NON zinc coated rotors...aka, the blanks.

How do they compare to zinc coated rotors? I have zinc coated brembos (drilled by DRT) in the front and they have no rust after almost two years (haven't cracked either ). I'd like to get blanks for the rears since they're cheap and I don't need drilled/slotted rears, but I don't want them to rust....I'm only replacing them because of the hideous rust anyway.

I just don't want to pay 180 bucks for less surface area on my rears all so they won't rust.

Also, I'm looking for some good performing street pads too. I currently have hawks, and my only complaint is the dust. I'd like to get something that performs as well but has less dust....any reccomendations?

 

We actually have another brand of "blank" rotors that are fully coated to protect against rust. They are also very attractive price-wise too. Let me know what year Maxima you have and I'll get you a quote.

 

Actually I found some PBR blank rears for about $22 each!!! How much/what brand are your coated blanks? I doubt they're that cheap, but I'm willing to pay a little more for rust protection. I probably won't need them till after school's out, but I like to shop around. PM me a quote. Thanks!

EDIT: I have a 1997 SE.

 

Looking for a quote with shipping for Brembo blanks and low dust / 0 noise pad for 2005 Altima SL (front only). This is the wife's car so the lower the dust and noise, the better. Thanks!

 

Sent you both PM's

 

Check your PMs!

 

Questions:

What's the diff between the blanks and the drilled/slotted material wise?

Do you guys sell pads too? Specifically Hawk HPs?

And in a PM could you let me know how much front blanks + Hawk HPs would be shipped to 11238 or 11510? Thx.

 

 

The blanks and Slotted, Drilled Rotors use the exact same metals. The only difference is the Slotted and Drilled rotors have a bronze/gold'ish anti-rust coating on them. The blanks do not have this.

And yes we do sell all Hawk brake pads. I will send you a PM with your quote.

 

Barc and mowgli29 - You both have replies via PM

 

Can you give me a total for the brembo blank front and Axxis Deluxe plus pads for Infiniti I30 '01 shipped to 07751? Thanks.

 

Do you have Akebono Street Performance or ProACT only? How much for 4 Brembo blanks (front and rear) with Akebono Street (if you have) or ProACT if not shipped to 11229?

 

Hey, we should have them. What year is your Maxima?

Thanks again,

Jeff

 

I could do it all for $145 shipped.

Thank you,

Jeff

 

Sorry, its a 1999.

 

pimp349 - Sent you a PM with the full quote

 

93 max 4 disc brembo blank (front n rear) shipped to 11214

 

$172 shipped, thanks!

Jeff

 

i'm interested.

1998 Max.
4 discs Brembo Blanks, front and rear - shipped to 11236

price and time frame please

thanx

 

$36 per Brembo Front Blank Rotor
$29 per Brembo Rear Blank Rotor
$39 - UPS Ground shipping
Total = $169 shipped

Shipping time to Brooklyn, NY takes 5 business days via UPS Ground. We have these in-stock and ready to ship.

Thanks,
Mike

 

Hey Importrp,
How much for EBC redstuff brake pads for both front and back of a 2006 nissan maxima? Can you please PM me or email me at darayupmain@yahoo.com? Thanks...