This sale is over, thanks for the response. Check the 23-27 October Cattman Weekly Sale for more deals!

Cattman Performance weekly specials / 09 October - 20 October 2006:
These will change from day-to-day, so please note the expiry dates. If you don't see what you're looking for, keep checking. "Limited Quantity" means there will only be a few units available at the sale price, so move fast to avoid disappointment! Unless noted otherwise, shipping is not included.

Exhaust Performance
- Cattman Y-pipe for 99-01 CA/NLEV Maxima; reg. $360, SALE PRICE $325. [Limited quantity at this price, sale over when gone.]
- Cattman Catback Exhaust System for 04-06 (maybe 07?) Maxima; reg. $840, SALE PRICE $739. [Limited Quantity at this price, sale over when gone.]
- Cattman Catback Exhaust System for 00-03 Maxima, 00-04 I30/I35; reg. $600, SALE PRICE $549. [VERY Limited Quantity at this price, sale over when gone.]

Suspension Performance
- Progress RSB for 95-03 Maxima and 95-04 I30/I35; reg. $140, SALE PRICE $109. Sale ends 20 October.
- Progress Sport Springs for 95-03 Maxima and 95-04 I30/I35; reg. $169, SALE PRICE $129. Sale ends 20 October.
- Progress Camber Bolt Kit for all 95-06 Maximas, 95-04 I30/I35; reg. $60, SALE PRICE $29. Sale ends 20 October.

Other Performance
- Energy Suspension Rear Motor Mount Bushing (1) for 95-03 Maxima and 95-04 I30/I35 w/ AUTO Transmission; reg. $50, SALE PRICE $42 Sale ends 20 October.

"Odds and Ends"
- New Nissan axle set (stock) for 95-01 Maxima 5-speed, $150, a small fraction of original cost. Pictures available on request.

Cattman News
- Y-pipes are in stock again! We've got 99-01 CA/NLEV Maxima y-pipes (#YG5CA) on hand now and should have more for the 95-98 Maxima (YG4) and 99-00 Fed-spec Maxima (YG5) by 23 October.
- Yes, Cattman headers for the 95-03 Maxima will be back in production before the end of October. We're now accepting pre-orders for the second production run.

We take orders and answer questions by phone (520.575.6195 if you have free LD, 800.759.9920 if you don't), open 10-5 MST, M-F.

Keep an eye on this post for new sale items!

Brian

 

c'mon Brian, you can't sneak the 95-99 catback in there? j/k man. I'll be calling about the Progress springs

 

How much for shipping on RSB to 98501?

 

It will turn up as soon as I notice there are a few more on the shelf than there needs to be. Keep an eye on this post, it will be ongoing with new items every week or two.

Brian

 

Only $13.37.

BCC

 

RSB ordered. The nice lady who placed my order was very friendly. Thanks!!

(Now I need a b-pipe... *wink wink hint hint*)

 

I wish I waited a few more weeks. I picked up your rear section a few weeks ago and I just ordered your b-pipe. Oh well. I still can't wait to get my b-pipe. One thing I noticed is the tone is very different with just your rear section installed with the stock b-pipe as opposed to a friend at school's 4th gen with your full cat-back. It has a deeper tone with just the rear section. But I heard the full set up on my friends which is why I picked up the b-pipe also. That thing screams and it is the nicest sounding max i've ever heard in person so hopefully mine will sound the same once the b-pipe is in. I think you are producing the best cat-back available for the 4th gens and i'm looking to pick up your headers in the near future. If anyone is thinking about getting his cat-back, GET IT. You will not be disappointed.

 

How much is progress springs shipped to 06770? Thanks

 

+1, very true

 

That would be $17.26.

BCC

 

hey brian also waiting for the catback on 97 max

 

How much for the Cat-back exhaust system (for '03) shipped to 30093?

 

can you get some stuff for 6th gen?

 

Hey Brian, so you now have ES motor mount for 2k1 auto, is that right ?

AA

 

Keep an eye on the weekly specials, there won't be any advance notice of sale items. Some may appear and disappear in a couple of days.

Brian

 

$549 + $58.50 shipping (2 large boxes) = $607.50

BCC

 

Sure, note the 04+ catback exhaust that's on sale right now - its absolutely the best exhaust system available for the car.

We also have intakes and a nice set of suspension parts.

Brian C Catts
Cattman Performance

 

do you have any kind of performance numbers for the catback? I haven't seen any... hoping it's for more than just sound..

 

95-99 RSB shipped to 55447 or 58105 (whichever is faster)

 

Our CB-G6 catback for the 04-06 (maybe 07?) makes a solid 10-12hp; we've heard back from several customers confirming this. Our CB-G5 catback for the 00-03 Maxima (00-04 I30/I35) will make roughly 5-6hp on the VQ30DE, 10+ on the VQ35DE. Others may claim more for their systems, but its baloney.

There is no rocket science or magic in a catback design - get the basics down right (correct tubing size, minimize the # and severity of bends, straight-through resonator and muffler, stainless steel for heat retention) and you'll make all the power there is to make. Couple that with excellent design and fabrication for fitment and longevity, and you've got a Cattman catback!

Brian C Catts
Cattman Performance

 

(please disregard)

 

I'm not sure that one would be faster than the other, but the 55447 address would be cheaper at $13.25.

Brian C Catts
Cattman Performance

 

any idea if a y-pipe for 6th gen's will be available anytime?

 

How much to ship RSB for an '03 to 27615?

Also, I've only had my '03 6spd for abt 2 months so I haven't had much time to research. Is there much difference in performance gain between the catback exhaust and the CBM-G5 muffler? I would imagine the muffler gain would be less and is more for exhaust note rather than performance. Correct?

How much would shipping be for each to 27615?

 

We'll spin out a y-pipe that can be used with the stock manifolds while we're doing the header development for the '04-07. That process will start once we get the 95-03 headers thoroughly back into production, which isn't far off. My best guess for the completion of the 04+ Maxima header/y-pipe project would be late winter.

BCC

 

i'm interested in the rear sway bar... please PM me total cost thanks

94030 is the zip code sorry

 

Shipping for the RSB will be $17.26.

You're probably aware of this, but just to be sure, the Cattman CB-G5 catback exhaust consists of our CBB-G5 b-pipe and CBM-G5 muffler.

Your assumption is correct. If you put on just the muffler, you'll get much of the sound (of the full catback) but less than half the power. Conversely, using the Cattman b-pipe with the stock muffler will make over half the power (of the full catback) but less of the sound.

Shipping the CBM-G5 muffler to you on the east coast will cost $44.47; the CBB-G5 b-pipe will be $27.55 (shipping costs are less for addresses farther west).

I'll mention that if anyone is interested in the CBM-G5 or CBB-G5 parts that make up the CB-G5 system that's on sale, we will apply the same discount to the individual parts. Give us a call and we'll come up with a price.

BCC

 

Brian you got paypal

 

Do you guys ship from tucson? Just wondering because I live in Vail and was just wondering if I could just come by the store?

 

Brian could you possibly start a new thread each week with the valid dates in the title with whatever deals you might have going? I can see that this one will be quite lengthy before very long.

 

- Energy Suspension Rear Motor Mount Bushing (1) for 95-03 Maxima and 95-04 I30/I35 w/ AUTO Transmission; reg. $50, SALE PRICE $42 Sale ends 20 October.


wat purpose does it serve and... wat are the benefits towards installing this and how hard is it... *sign of interest*

 

It basically limits the forward-rearward movement of the motor. If you've ever watched a manual tranny Maxima dyno run with the hood open, you have see how the motor pitches back and forth with the gear changes. Thats a lot of mass moving around, and stabilizing it does at least two things.

1. it will significantly reduce wheel hop off the line
2. you'll notice it during hard cornering; the car's behavior becomes more predictable when you don't have several hundred pounds shifting back and forth over the front end.

You may notice a very slight increase in vibration because the stiffer mount transmits more to the chassis, but I'm not talking small about a big thing, it really is a minor effect with one bushing and not that significant with two. Nothing like the vibration from the old Place Racing motor mounts.

I hope that covers your questions.

Brian C Catts
Cattman Performance

 

Whats your price/availability for a Progress RSB for the '04. Shipped to 55427?

 

I got my RSB last week and installed it this weekend. Big improvement in handling. The rear feels like it is a part of the car now with almost no body roll during cornering. I love it. Thanks for the great deal Brian!

 

pics of the dented 5th gen muffler. also, how different is that from a 4th gen? i want your guys exhaust, but i prefer the 2 tip look. is it different hangers? or different piping also?

 

how much for 00 y-pipe shipped to 30263? THANKS.

 

I'd also like to know if a picture was possible for this dented muffler, Brian.

As for your 4th gen, I believe the hangers are identical, although the piping is not. Therefore you'd have to chop off the tubing and put a 4th gen tubing right at the muffler. Hope this helps!

 

is this a sale on the springs right now for 6th gen? or any time soon?

 

thanx for the order Brian..... got the tracking #

 

The Progress Sport Springs for the 04-07 Maxima are on sale this week, check the new weekly sale post later today.

Brian C Catts
Cattman Performance