Cattman Performance “Weekly” Sale
28 Feb - 09 March 2007

This sale is over.

 

great sale...WAYYYY too many colors.

 

going to call you later, wondering if I can put a deposit down on some headers to have them held till wednesday

Just dropped $1400 on rims so have to wait till I get paid again =)

 

on the 10. Energy Suspension 6-Speed shifter bushing set for 02-06 Maximas, i tried looking them up online at their page but didnt find the listing or a picture. where do these bushings go? in the cabin or under the hood?

 

I only have 2 header sets without EGR ports; they fit 2001 Anniversary Editions, all 2002-03 Maximas, plus 2002-04 I35s. I don't see your car information, so I don't know if these will work for you.

I'd really prefer to get paid before next Wednesday, but if someone else doesn't buy them before you call, I'll consider it since you're here in Arizona. Total cost will be $862.12. You can pick it up in Tucson, or we can ship it to Phoenix for $24.89 (big, heavy and expensive to insure). I'll note that I can also arrange for the best installation services you'll find anywhere, at unbelievably reasonable prices. The Nissan Master Tech mechanic I use can do a header install in about 3-4 hours, depending on the year of car, install an O2 simulator if necessary, and it won't cost over $200.

You can reach us at 520.575.6195, open 9:30-5:30, M-F.

Brian C Catts
Cattman Performance

 

The two main bushings go at either end of the shift cable - on the shifter and on the tranny-mounted bell crank. Four smaller pairs of bushings are installed at each corner of the big nylon base (where the base is attached to the body of the car) the shifter is mounted to.

Brian C Catts
Cattman Performance

 

Interested in the sway bar bushings for the 02 se max. can i call with a credit card and order that way or what?

 

I made a change to the sale, we have two headers available right now, one with an EGR port, and one without.

BCC

 

Yes, that's how we take about all of our orders. Just give us a call and a CC will be fine.

Brian

 

you guys gonna run any specials on catbacks or axlebacks

 

We haven't raised the prices yet, so you could say they're on special now. A lot of exhaust parts fall of the cars due to rust in the Spring, so we struggle to keep exhausts in stock this time of year.

We've been out of the 00-03 Maxima exhausts for a couple of weeks but will be getting more in tomorrow.

Brian C Catts
Cattman Performance

 

Brian,

What is the pricing on the cat back? + shipping to Tampa, Fl. Zip is 34685

Anyone have a clip of a stock Max with the Cattman cat back? I'm not interested in doing headers or anything else.

and yes, I looked in the sound clip thread.

 

whats the price on an axleback 01 shipped to 21122 md

 

Whats the price for a 6thGen Exhaust with the biggest resonator you have?

Kamski

 

yo brian, will any intakes fit my car? going back to N/A.... (99 I30)

 

I don't get it, where's the 4th gen progress spring love?

 

brian, i meant that its the same for the 02-06? i thought teh 5th gen was diff from the 6th gens for the bushings?

 

Alright. If I wait until the next "sale" are 4th gen springs and RSB going to be any cheaper?

If not, quote for a set of springs, an RSB, and full set of FSB bushings (frame and endlink) shipped to 93103 please.

 

Hey Brian, do you have any more sets of headers/y-pipe system?

 

Sorry I've missed this for a few days... Catbacks for 95-03 Maximas are still $599 and shipping from Tucson to Tampa would be an additional $69.59. We have a few 00-03 systems in stock right now, give us a call.

Brian

 

Do you just mean the muffler/rear section? The price is $350 + $50.30 (its a BIG box) from AZ to MD. We have the part in stock.

Brian C Catts
Cattman Performance

 

$849 w/ a resonator that is much like the new one we're using. Our current inventory of 04+ catbacks was manufactured before we received the current resonator style, but the ones we used on these catbacks are very similar.

BCC

 

I like to keep it affordable and simple, so I recommend the JWT POP intake. Only $119 at the current sale price, very easy to install, and the only short-ram intake with a legitimate velocity stack incorporated in the design to reduce the power, and gas mileage-killing air turbulance that other short rams creat so much of.

We have plenty in stock, ready to ship

Brian C Catts
Cattman Performance

 

The risk we always run when setting a super low price is that customers will expect the part to be available at that price again. This isn't very likely. We were hugely overstocked. Those were selling for about $15 less than Progress's best wholesale prices (about $134, they just went up), and for us it was about break-even.

We had way too many, nowhere to store them, had to get some out the door. Desperate times call for desperate measures.

We'll still beat anyone else's "real" price* on the Progress springs for 00-07 Maximas, which seems fair. I can't do that for the 95-99 Maxima springs at this moment because we only have a few sets left and won't get more for a while.

Brian

*"real" price means that a company actually has the part in stock and is currently shipping them at that price.

 

Oh, I see. No, the bushings remain the same from 02-06. Its the short shifter kit that works on the earlier cars, but not the later ones.

Brian

 

email sent

 

We do sales roughly once or twice a month. I don't expect to see the 4th gen springs or RSBs on sale until we re-stock both parts, and that won't happen for at least 8-10 weeks.

Right now, our best price for Progress springs and RSB would be $269 + $32.28 shipping.

Brian C Catts
Cattman Performance

 

We're down to one header/y-pipe set for the 02/03 Maxima and 02-04 I35, which probably isn't what you're looking for, sorry about that. If you'd like to get in on the next batch, just place your order to lock your place in line. We don't charge credit cards for backorders until the part is complete.

Brian C Catts
Cattman Performance

 

thanks for getting back to me . . what's the final price shipped to 96814?

Take paypal?

 

how much would a full exhaust be including headers/y-pipe, and then the cat back, and a high flow cat if you sell one and a place racing CAI all for a 1996 Nissan Maxima GLE shipped to 02038?
Thanks

 

I would like the last set of headers for a 2002 maxima. I will call you tomorrow and pay.

-Rich

 

Whoops, you forgot the sway bar bushings. Would you just toss 'em in with the other packages?

Anyway add bushings to that and I'll take it. I gots to be having a suspension overhaul... also, do you sell OEM dust boots/bushings, or spring insulators?

 

That comes to a total of $137.50, shipped to you in 3 days. We do take PayPal, I'm sending my payment address to you via PM.

Brian C Catts
Cattman Performance

 

*cough*

 

Brian how much for a b-pipe for a 2002 maxima

 

This would be a VERY nice step up from stock!

Cattman Headers - $849
Cattman FastCat - $259
Cattman Catback - $600 (will increase soon)
PR CAI - $189

Subtotal retail parts - $1897
Complete system discount - $142
Total parts - $1755

Total shipping from AZ to MA - $132.93

Total parts and shipping - $1887.93

Thanks for your interest.

Brian C Catts
Cattman Performance

 

rich,

If we talk in the morning, I'll be glad to see that they're shipped in the afternoon.

Brian

 

.

 

Do you want the FSB frame and endlink bushing sets? Just $12/each and they add nothing to the shipping.

We sell the KYB dustboots/bumpstops for $59/4 and the 95-99 Nissan upper front strut mounts (insulators) for $42. These will all fit in the RSB box too, and ride for free.

Just add $125 to the first quote and we can include the bushings, mounts and boots/bumps.

Brian

 

Still just $275, plus $17.88 shipping to SoCal or $19.14 to NorCal. We've got plenty in stock.

Brian