This sale is over, thanks very much! A new Cattman sale has been posted, ending 24 August.

 

Will be placing my order finally tomorrow I cannot wait. What time are you open till as I have to wait for my dad to come home to order and he gets home around 6 pm usually.
Thanks

 

That should work out. We're open 9-5 MST/PDT, which is Noon-8pm on the East Coast.

Brian

 

Sick, I will be calling you as soon as he walks through the door tonight.

 

Cattman Catbacks for 95-99 Maxima and I30 , reg. price $599.99, discount price this sale only 549.99

Brian your killin me... I thought I asked if there was an upcoming sale before we ordered my dads catback!

 

Don't blame you for feeling that way, I cooked up this sale last night. Give me a call, let's see if we can make some adjustment.

Brian

 

Is the progress/cattman coilovers for A32 max a direct bolt on? And what are the spring rates on those CO's?

 

Hey Brian...are the 99 Cali Y-Pipes on sale?

 

So.... what about just a muffler for a '97 shipped to 93103?

 

Whats all in the Pedders Suspension Set for the 89-94?

 

Do you ship to Canada?

I want to get the progress RSB, will it be the same price shipped to Toronto?

 

Yes they are. Spring rates are 450# in front, 375# in the rear.

Brian

 

No, they are not.

Brian

 

These are the set included:

Rear trailing arm set (major set, lots of pieces)
rear lower arm set (major set, lots of pieces)
rear sway bar D bushings (2 pieces)
rear sway bar link bushings (8 pieces)
front sway bar link bushings (2 pieces)

Brian

 

Yes, we ship a lot of parts to Canada. I wish the shipping prices were the same, but we'll need to charge an additional $15 ($169.99) to cover the extra cost on an RSB. That would be for shipping via USPS/Canada Post.

Brian C Catts
Cattman Performance

 

We've only got a couple 95-99 mufflers in stock and when we get that low they're only sold as part of a complete catback.

If you'd like to place a backorder, the price would be $325 minus your maxima.org discount - $308.75 - plus shipping, which would be just $17.88, a total of $326.63. A backorder puts your name on the next batch, which should be aready in 2-3 weeks. We do not charge the CC till the parts ready to ship.

Brian

 

Hey brian, can you beat www.suspension.com price for the ES motor mount for a 2001 Maxima 5spd?

 

On bushings, the price is the price.

Brian

 

alright, gotcha. i'll let you know if i'm ready to bite the rice bullet in a few weeks.

in the meantime, i've been wondering for awhile... what's the design of the tip? I've seen what looks like two different designs... the thickish tip with rounded end and perforated interior and what looks like just a thin tip with a flat/sharp end currently on your website..

 

Let us know whenever you're ready.

We've been using the "thickish tip with rounded end and perforated interior" on our 95-99 mufflers for quite a while with good results. I like that style for a single tip, but when it comes to dual tips I still prefer the simple, clean effect of the single wall, slightly angle-cut, polished stainless tips we use on the 00-03 exhaust.

Brian

 

so how much shipped to 94030 for the es motor bushings?

 

That would be $89, shipped, for the pair. You needed two rather than one, right? If you can find a better deal elsewhere, of course we'd understand.

Brian

 

so where can i paypal you at?

 

I've sent you a PM with the information, and thanks, we appreciate the business!

Brian

 

How much am I looking at for the resonator shipped to 94132? And I hate to force you to bring a comparison but in your personal opinion would your product more effectively quiet down my universal magnaflow muffler than a 27" magnaflow resonator?

 

Total cost, shipped, is $92.59.

Since I established all of the specifications for the resonator we have custom made, I'm very familiar with it, but I know practically nothing about the 27" magnaflow unit so I couldn't make a knowledgeable comparison, sorry about that.

I'll note a couple things though. Ours is all stainless steel, from the outside casing, to the stainless wool packing, and the inner perforated tube. That all adds up to a longer lifespan than designs that use non-stainless metals, and fibreglass-type packing, but this does not necessarily apply to the Magnaflow unit.

Perhaps more significant would be the 27" length. I'm not sure there's enough room for that unit on the 95-03 Maximas. We went with 22" x 4" because we knew it would fit, but there isn't much room left. Not saying the 27" unit won't fit, but you'd want to be certain before making that purchase. If your car is any 95-98, or a 99/00 w/ Federal emissions, you'll need to allow room for an O2 sensor port at the forward end of the b-pipe (ahead of the resonator). Also, a 27" resonator would typically be intended for trucks, which is only an issue if the diameter of the body is too large. I would be concerned about the fit of anything over about 4" in diameter - the exhaust moves around a fair bit while you drive and you don't want it to rattle.

Hope this is useful.

Brian

 

when will this be shipped out?

 

Do you sell Illuminas Brian?

I am really interested in Progress/Illumina set up for my 00' Max.

 

Thanks for your input Brian. I understand what you're saying about the fitment, I was measuring the piping the other night and I realized I wouldn't be able to install one without hacking into the B-Pipe. So the 22" resonator will allow enough room for the O2 sensor bung? I'm more than likely placing an order for the resonator, is it possible to pay via PayPal? Send me a PM with info, if possible. Thanks again.

 

Ordinarily I'd say that if we received before 2pm, same day. If after, next day. I wondered why you were asking that because I hadn't received an email prompt from PayPal. Glad you wrote, because I see your payment arrived yesterday. No idea why I never got the email, that's never happened before.

Anyway, now I know the payment's received, it will ship tomorrow!

Brian

 

will the 02/03 Y-pipe fit the stock headers? and do you think the fastcat or the random tech cat would be better fitment/sound/flow?

EDIT: you can beat Tirerack.com? hell, I'm like 10 seconds away from ordering up some Gram Lights and trying out those new Goodyear F1 All Seasons. . I think I'm going to need to call you up brian.

 

thanks brian... is there anyway you can ship it out UPS instead of DHL.. DHL lost my sway bar last time and it took them 2 days to find it.

 

Sorry that happened, but DHL and USPS are the only shippers we use for shipments w/in the US., and its too late to arrange an USPS pickup for tomorrow. We get pretty good results from DHL, its unlikely that this will happen again.

Brikan

 

Actually. the 02/03 y-pipe bolts to the pre-cats under the stock headers (they both stay on, none of the cats are removed with an 02/03 y-pipe is installed), and its a direct bolt-on.

No street-legal cat available as a bolt-on for the Maxima flows like our all-metal FastCat, and the RT cat with a ceramic core isn't even close. In fact, our dyno tests showed the ceramic RT cat won't perform as well as the stock Calsonic cats that Nissan used up through at least 2003. The FastCat beats stock by at least 5whp, and several customers have called to tell us their dyno results were substantially more. There are other all-metal cats out there, but they're not EPA-approved for legal street use so there's no guarantee they'll pass emissions.

ABsolutely, please give us a call. We set up a wholesale account at TireRack recently to snag the last set of Brembo Gran Turismos for a customer. [I say last set because supposedly this was the last set of GT's for the Maxima in North America, perhaps the world, and Brembo says they aren't planning to make more.]

The margins we get from TireRack aren't great, but they're enough for us to offer a slightly better price than theirs.

So, might as well order from Cattman, we've never seen TireRack do anything for the Maxima world or maxima.org., eh?

Brian C Catts
Cattman Performance

 

We use this resonator in all of our catbacks - its why we had it made - so there's plenty of room for the O2 ports on our 95-99 and 00-03 b-pipe designs.

PayPal's fine, I'll send a PM with our payment address.

Brian

 

We do sell the Tokico line, although it's a challenge to match some of the online pricing. Tokico and KYB have been severely undercutting their own distributor networks by selling under wholesale to large volume internet resellers.

Anyway, we can do the Tok-Ills and Progress springs for $675 + shipping (or just the springs at the sale price).

Brian C Catts
Cattman Performance

 

What kind of deal can you do on some 17x8 Enkei RPF1's? tirerack has them for $251/piece.

 

Does the Combo intake require drilling on a 95-96 fender?

 

Sent you a PM.

Brian

 

No, the Combo intake combines a Place Racing upper tube (between throttle body and MAF) with a JWT POP intake (a short-ram intake that doesn't require a fender hole).

I'll mention that as a group, the main problem with short ram intakes is that they create a lot of turbulance, which buffets the hotwire, causing a very erratic signal from the MAF to the ECU. That's not a good thing because it reduces gas mileage and performance, and it's why the JWT POP intake is the only short ram intake design we can recommend. The big, cast-aluminium velocity stack (that the filter clamps around) reduces turbulance drastically.

It may not be in the Cattman Weekly Sale ad, but also be aware that we still have the Place Racing CAIs for 95/96 Maximas. This is the most effective intake ever made for that car, but it does require cutting a 3.25" hole so the filter can be placed outside of the engine compartment (basically behind and a bit lower than the drivers-side headlight. Price is $210/kit.

Either way, you can order by calling 520.575.6195 between 9-5 MST/PDT, M-F.

Brian C Catts
Cattman Performance