95-99 Maxima VQ30DE Thermal Phenolic Intake Spacer Kits ON SALE! - NWP Engineering
#44
Are you talking about the MEVI? I believe it will.
#45
Please try to be more specific about which manifold you're referring to. If you are referring to the MEVI, then yes, it works GREAT! There are several happy customers that have this installed with the MEVI and they love it!
We are testing the entire kit, not just the LIM Spacers. The DEK could still benefit from lengthened intake runners with port matched spacers.
We are testing the entire kit, not just the LIM Spacers. The DEK could still benefit from lengthened intake runners with port matched spacers.
#49
If you want to receive the discount, your order must be received by midnight tonight.
Please visit the link below to place your order. Thank you.
http://www.nwpengineering.com/Phenol...rs.html#VQ30DE
#50
This sale is now over, but you can still purchase your kit for only $215 plus shipping.
They are in stock and ready for immediate shipment.
http://www.nwpengineering.com/Phenol...rs.html#VQ30DE
They are in stock and ready for immediate shipment.
http://www.nwpengineering.com/Phenol...rs.html#VQ30DE
#51
Summer is just around the corner! Dyno and butt dyno proven gains!
Here is a review thread with butt dyno results:
http://forums.maxima.org/showthread.php?t=554106
Dyno results:
http://www.nwpengineering.com/images...acers-Dyno.gif
Here is a review thread with butt dyno results:
http://forums.maxima.org/showthread.php?t=554106
Dyno results:
http://www.nwpengineering.com/images...acers-Dyno.gif
#52
Here is another review thread of the 95-99 Maxima Thermal Intake Spacers.
Review by mtrai970:
http://forums.maxima.org/showthread.php?t=563845
Review by mtrai970:
http://forums.maxima.org/showthread.php?t=563845
#57
VQPower.com review of the 95-99 Maxima Thermal Intake Spacers!
http://forums.maxima.org/4th-generat...it-review.html
http://forums.maxima.org/4th-generat...it-review.html
#58
VQ30DE Thermal Intake Spacer Kit Review from VQpower.com
During those HOT summers, don't you wish there was a solution to the decline in response and performance once that dreaded heat soak process has taken effect? Heat Soak occurs when heat is applied and not dissipated at an equal rate causing the material to flood with overwhelming tempature limits. That being said Aaron Kimball of NWP Engineering has thought of an easy solution to keep those intake temperatures at optimal levels. The use of Phenolic Laminate Material insulates the intake and throttle body components, reducing the rate of heat transfer from the heads to the intake manifolds, for cooler air which in turn restores optimal performance. Phenolic Laminates are usually compression molded and they have good strength and toughness, good arc resistance and other electrical properties, good resistance to solvents and high temperatures which makes this Spacer Kit a bargain. Today's product we are going to focus on is the VQ30DE Phenolic Thermal Intake Manifold Spacer Kit which is said to have an average Intake Manifold Temperature decrease of 43degrees.
Read the entire review with installation steps and pics at VQpower.com!
During those HOT summers, don't you wish there was a solution to the decline in response and performance once that dreaded heat soak process has taken effect? Heat Soak occurs when heat is applied and not dissipated at an equal rate causing the material to flood with overwhelming tempature limits. That being said Aaron Kimball of NWP Engineering has thought of an easy solution to keep those intake temperatures at optimal levels. The use of Phenolic Laminate Material insulates the intake and throttle body components, reducing the rate of heat transfer from the heads to the intake manifolds, for cooler air which in turn restores optimal performance. Phenolic Laminates are usually compression molded and they have good strength and toughness, good arc resistance and other electrical properties, good resistance to solvents and high temperatures which makes this Spacer Kit a bargain. Today's product we are going to focus on is the VQ30DE Phenolic Thermal Intake Manifold Spacer Kit which is said to have an average Intake Manifold Temperature decrease of 43degrees.
Read the entire review with installation steps and pics at VQpower.com!
#60
Yes. The prototype kit isn't quite ready yet for testing.
http://forums.maxima.org/all-motor/5...cer-kit-2.html
http://forums.maxima.org/all-motor/5...cer-kit-2.html
#63
Iv been interested in these for awhile now, Im pretty mechanically inclined and should have no problem installing these, but im not good with names, so I have a question. My mechanic just told me that my max is starting to have a oil leak and will need to have the gaskets replaced on the right and left valve covers, and Plenum gasket. do these spacers replace those or are these other gaskets I will need on top of these. just basically trying to figure out some total cost numbers here....
Thanks....
Thanks....
#64
Iv been interested in these for awhile now, Im pretty mechanically inclined and should have no problem installing these, but im not good with names, so I have a question. My mechanic just told me that my max is starting to have a oil leak and will need to have the gaskets replaced on the right and left valve covers, and Plenum gasket. do these spacers replace those or are these other gaskets I will need on top of these. just basically trying to figure out some total cost numbers here....
Thanks....
Thanks....
http://www.nwpengineering.com/Phenol...rs.html#VQ30DE
In that link, you will find the installation instructions in PDF format. Feel free to read over them. Also, feel free to ask any questions you want. I'm more than happy to help out.
Thanks!
#65
The 4th gen Maxima Thermal Intake Spacer Kits are now back in stock and ready for immediate shipment!
Please place your order directly on our website at: http://www.nwpengineering.com/Phenol...rs.html#VQ30DE
The DEK hardware kit will hopefully be released sometime this week. Stay tuned for updates! For those that do not know, we are developing a hardware kit that will allow you to install the 95-99 Maxima Spacers on the 00-01 Maxima intake manifold.
Please place your order directly on our website at: http://www.nwpengineering.com/Phenol...rs.html#VQ30DE
The DEK hardware kit will hopefully be released sometime this week. Stay tuned for updates! For those that do not know, we are developing a hardware kit that will allow you to install the 95-99 Maxima Spacers on the 00-01 Maxima intake manifold.
#66
NWP Engineering is happy to finally release the 00-01 Maxima Hardware Kit to allow the installation of the 4th gen Spacers!
Please read more about them here:
http://forums.maxima.org/group-deals...01-maxima.html
Please read more about them here:
http://forums.maxima.org/group-deals...01-maxima.html
#67
For a limited time only, take advantage of our Pre-MAXUS 09 Sale!
95-99 Maxima Thermal Intake Spacer Kits for only $185.99! Our lowest price ever!
View our sale thread here:
http://forums.maxima.org/group-deals...ck-plates.html
95-99 Maxima Thermal Intake Spacer Kits for only $185.99! Our lowest price ever!
View our sale thread here:
http://forums.maxima.org/group-deals...ck-plates.html
#68
We currently have several kits left in stock that are ready for immediate shipment! Please feel free to post if you have any questions.
To place your order, please visit our website:
http://www.nwpengineering.com/Phenol...rs.html#VQ30DE
To place your order, please visit our website:
http://www.nwpengineering.com/Phenol...rs.html#VQ30DE
#70
as someone recently asked i have the same question just wanna make sure im hearing this right. I have an oil leak also, and i needa replace both my front and rear valve cover gaskets, getting these spacers will replace the need of getting the valve cover gaskets?
#71
Please let me know if you have any more questions.
#73
The 95-99 Maxima Thermal Intake Spacer Kits are now back in stock. Please let me know if you have any questions.
http://www.nwpengineering.com/Phenol...rs.html#VQ30DE
http://www.nwpengineering.com/Phenol...rs.html#VQ30DE
#77
The 4th gen Maxima Thermal Intake Spacer Kits are back in stock once again. Please let me know if you have any questions.
http://www.nwpengineering.com/Phenol...rs.html#VQ30DE
http://www.nwpengineering.com/Phenol...rs.html#VQ30DE
#79
All Thermal Intake Spacer Kits are in stock and ready for immediate shipment. Please feel free to post if you have any questions.
http://www.nwpengineering.com/Phenol...rs.html#VQ30DE
http://www.nwpengineering.com/Phenol...rs.html#VQ30DE