02-08 3.5vq thermal spacers - 3pc kit
#1
02-08 3.5vq thermal spacers - 3pc kit
3.5vq thermal spacers are in for the 02-08 maximas
These will space the manifold from the block , elbow and also the throttle body that will also be bypassed . These are made from 3/8 phenolic and are port matched to the mainfold. Dyno Testing has shown an increase of 12 horse power and an increase of torque by 15ft/lbs. Our kits produce the highest horse power and torque increase in a manifold spacer kit for the 02-08 maximas
The kit retails for $164.99 shipped
Please visit our website product link for more information and dyno video testing
http://cxjperformance.com/index.php?route=product/product&path=27&product_id=47
These will space the manifold from the block , elbow and also the throttle body that will also be bypassed . These are made from 3/8 phenolic and are port matched to the mainfold. Dyno Testing has shown an increase of 12 horse power and an increase of torque by 15ft/lbs. Our kits produce the highest horse power and torque increase in a manifold spacer kit for the 02-08 maximas
The kit retails for $164.99 shipped
Please visit our website product link for more information and dyno video testing
http://cxjperformance.com/index.php?route=product/product&path=27&product_id=47
Last edited by CXJ Performance; 02-07-2012 at 01:38 AM.
#2
Good Job Cory. don't let all these haters bring you down by saying you take sales away from someone else. This is not the playground where someone can claim a tower. Its america where people are encouraged to make many variations of a good idea. it would be like ford throwing a pissy fit because GM wanted to make a CAR too. had everybody led way for ford because of some unspoken playground tower rule, there would be no such thing as NISSAN...
AMERICA!! take yer communist debacles elsewhere ya communist!!
how much are you selling them for?
AMERICA!! take yer communist debacles elsewhere ya communist!!
how much are you selling them for?
#3
Good Job Cory. don't let all these haters bring you down by saying you take sales away from someone else. This is not the playground where someone can claim a tower. Its america where people are encouraged to make many variations of a good idea. it would be like ford throwing a pissy fit because GM wanted to make a CAR too. had everybody led way for ford because of some unspoken playground tower rule, there would be no such thing as NISSAN...
AMERICA!! take yer communist debacles elsewhere ya communist!!
how much are you selling them for?
AMERICA!! take yer communist debacles elsewhere ya communist!!
how much are you selling them for?
thanks alot
i also made phenolic spacers for the 7th gen which no one has done. please check those out as well.
these are in the for sale sections of the 5th and 6th gens and are $165.00 shipped with all the stainless steel hardware needed. i did not cheap out on anything in these kits. my profits are very modest to say the best
#7
hey jason. funny seeing you up here. we spoke a few times on youtube about our 05 maxima sliver gtr kits.
i do not have a 5pc kit as i feel a 3pc kit is more effective.
the bop plates remove the restrictive vias valve in the manifold creating more air flow into the manifold chambers
the phenolic spacers reduces heat soak by reducing manifold temperatures and also adding a increase in air volume. with this 3pc kit you will also bypass the hot coolant running into the throttle body. the kit also spaces the elbow , throttle body and manifold from the block by 3/8 each section. that is almost 1-1/8 inches of added volume. seems little but this makes a big difference in horse power and torque. around 10hp's and 12 increase in torque
i do not have a 5pc kit as i feel a 3pc kit is more effective.
the bop plates remove the restrictive vias valve in the manifold creating more air flow into the manifold chambers
the phenolic spacers reduces heat soak by reducing manifold temperatures and also adding a increase in air volume. with this 3pc kit you will also bypass the hot coolant running into the throttle body. the kit also spaces the elbow , throttle body and manifold from the block by 3/8 each section. that is almost 1-1/8 inches of added volume. seems little but this makes a big difference in horse power and torque. around 10hp's and 12 increase in torque
Last edited by CXJ Performance; 02-07-2012 at 01:39 AM.
#8
hey jason. funny seeing you up here. we spkoe a few times on youtube about our 05 maxima sliver gtr kits.
i do not have a 5pc kit as i feel a 3pc kit is more effective.
the bop plates remove the restrictive vias valve in the manifold creating more air flow into the manifold chambers
the phenolic spacers reduces heat soak by reducing manifold temperatures and also adding a increase in air volume. with this 3pc kit you will also bypass the hot coolant running into the throttle body. the kit also spaces the elbow , throttle body and manifold from the block by 3/8 each section. that is almost 1-1/8 inches of added volume. seems little but this makes a big difference in horse power and torque. around 10hp's and 12 increase in torque
i do not have a 5pc kit as i feel a 3pc kit is more effective.
the bop plates remove the restrictive vias valve in the manifold creating more air flow into the manifold chambers
the phenolic spacers reduces heat soak by reducing manifold temperatures and also adding a increase in air volume. with this 3pc kit you will also bypass the hot coolant running into the throttle body. the kit also spaces the elbow , throttle body and manifold from the block by 3/8 each section. that is almost 1-1/8 inches of added volume. seems little but this makes a big difference in horse power and torque. around 10hp's and 12 increase in torque
i bought the 5 piece kit and was going to put them on when i saw your leak post so i kept them in the box and waited for yours to come out. i was thinking about reselling the 3 piece and keeping the last two and combining yours and NWP but your saying i don't need them? i need to hurry because they wont do refunds forever..
Last edited by twentyeggs; 10-30-2011 at 09:40 AM.
#14
Good Job Cory. don't let all these haters bring you down by saying you take sales away from someone else. This is not the playground where someone can claim a tower. Its america where people are encouraged to make many variations of a good idea. it would be like ford throwing a pissy fit because GM wanted to make a CAR too. had everybody led way for ford because of some unspoken playground tower rule, there would be no such thing as NISSAN...
AMERICA!! take yer communist debacles elsewhere ya communist!!
how much are you selling them for?
AMERICA!! take yer communist debacles elsewhere ya communist!!
how much are you selling them for?
Did not think I was gonna ever say this but, I agree with twentyeggs
Congrats Cory.
#16
hey jason. funny seeing you up here. we spkoe a few times on youtube about our 05 maxima sliver gtr kits.
i do not have a 5pc kit as i feel a 3pc kit is more effective.
the bop plates remove the restrictive vias valve in the manifold creating more air flow into the manifold chambers
the phenolic spacers reduces heat soak by reducing manifold temperatures and also adding a increase in air volume. with this 3pc kit you will also bypass the hot coolant running into the throttle body. the kit also spaces the elbow , throttle body and manifold from the block by 3/8 each section. that is almost 1-1/8 inches of added volume. seems little but this makes a big difference in horse power and torque. around 10hp's and 12 increase in torque
i do not have a 5pc kit as i feel a 3pc kit is more effective.
the bop plates remove the restrictive vias valve in the manifold creating more air flow into the manifold chambers
the phenolic spacers reduces heat soak by reducing manifold temperatures and also adding a increase in air volume. with this 3pc kit you will also bypass the hot coolant running into the throttle body. the kit also spaces the elbow , throttle body and manifold from the block by 3/8 each section. that is almost 1-1/8 inches of added volume. seems little but this makes a big difference in horse power and torque. around 10hp's and 12 increase in torque
#17
no problem and i sent a pm on what i feel you should do for more power
#18
Funny, I was thinking the exact same thing when I read his post. A good 20eggs post! I almost feel dirty now.
Cory: Best wishes, man. I might get me a set of these after the holiday season....
Last edited by CRiME; 10-31-2011 at 04:46 AM.
#22
Free install
of CXJ 3pc Thermal Spacers with the purchase of a set. The install will be done by me. Bring your spark plugs as well because it just another 10 minutes to change them as well. I am located in the CT area so MA,CT,RI, NY ,NJ come on down
of CXJ 3pc Thermal Spacers with the purchase of a set. The install will be done by me. Bring your spark plugs as well because it just another 10 minutes to change them as well. I am located in the CT area so MA,CT,RI, NY ,NJ come on down
#28
Good Job Cory. don't let all these haters bring you down by saying you take sales away from someone else. This is not the playground where someone can claim a tower. Its america where people are encouraged to make many variations of a good idea. it would be like ford throwing a pissy fit because GM wanted to make a CAR too. had everybody led way for ford because of some unspoken playground tower rule, there would be no such thing as NISSAN...
AMERICA!! take yer communist debacles elsewhere ya communist!!
AMERICA!! take yer communist debacles elsewhere ya communist!!
#30
#31
Thanks for sharing the link
Heres a direct link
https://www.paypal.com/cgi-bin/websc...=JWJC2N7QF57F8
Heres a direct link
https://www.paypal.com/cgi-bin/websc...=JWJC2N7QF57F8
Last edited by CXJ Performance; 12-01-2011 at 11:29 PM.
#32
hey cory i need a favor from you... i need JUST the lower intake spacer... i have a spacer kit for the 04 VQ35 but the lower intake spacer got ruined.. any way you could make me one and sell it to me??? i really hate to buy the whole kit if i have no need for it.
#36
#39
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
04-16-2020 05:15 AM
Pied
4th Generation Maxima (1995-1999)
0
09-26-2015 03:29 PM