Infiniti I30/I35 Similar to a Maxima, yet not really a Maxima. Discussion forum on Nissan's luxury model, the Infiniti I30/I35

Infiniti Body kits

Thread Tools
 
Search this Thread
 
Old Oct 13, 2004 | 05:36 PM
  #1  
Jon_from_OZ's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Oct 2004
Posts: 4
Infiniti Body kits

Greetings.

I have been recieving a lot of enquiries about the Australian spec "Lip Kits" that fit our A33 series Maxima. I believe that the US "Infinity" is the same vehicle.

We have these available, and I have in the past shipped several of these to the USA.

For your viewing pleasure, here are some photos of the kits that are available, and if you would to order them, please email me direct - parts@parrynissan.com.au

Front Lip Kit - AUD$280.00

Rear Lip Kit - AUD$240.00

Side Skirts - AUD$600.00

ALL are primed ready to paint, and prices do not include freight to the US, but the last time I sent Front and Rear kits (no side steps) it was AUD$60.00
I am willing to do discounts for bulk orders, and I ussually supply free gifts

Please make all enquiries to the above email link, as I wont get back here often.
Old Oct 14, 2004 | 07:36 AM
  #2  
MetaOrbit's Avatar
Got Projectors?
iTrader: (19)
 
Joined: Apr 2002
Posts: 3,532
From: Knoxville, TN
Jon! Great to see you on here! Thanks for hooking me up with the rear skirts!

-John
Old Oct 17, 2004 | 07:08 AM
  #3  
MaxedOut97SE
Guest
 
Posts: n/a
Originally Posted by MetaOrbit
Jon! Great to see you on here! Thanks for hooking me up with the rear skirts!

-John

Hey man when we talk I'd like your take on a stereo upgrade......This Bose BLOWS compared to my 97 Maxima.....That's about my only complaint however Oh and the 9MPG I keep getting from my heavy foot.
Old Oct 17, 2004 | 01:00 PM
  #4  
NewLoveI30's Avatar
Senior Member
 
Joined: Nov 2003
Posts: 1,860
Jon,

Thank you for your help on this. Once I find a job Ill have to order some for myself.

Do you know anything about those fog lights in the pic you posted? They look like they are pretty cool too. Any idea how much they go for?
Old Oct 17, 2004 | 05:01 PM
  #5  
Jon_from_OZ's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Oct 2004
Posts: 4
Hi,

Yes these fog lamps are available as well. They were put out as a kit for the Australian market, and include 2 lamps, switch, relay and full fitting instructions.

I am trying to find a better picture (close up) and will post here when/if I find one.

Cost on these is AUD$510 plus shipping.

Regards Jon

NOTE: You may recall I had a different image here. The image was of the Australian A33 (early version). I have since found out that I was given the wrong info from my supplier, and here are the correct images for the Australian A33 (late version)





The go in where the black filler panel is.
Old Oct 17, 2004 | 10:31 PM
  #6  
Longboarderphil
Guest
 
Posts: n/a
those are stock I30 headlights...we have those here too
Old Oct 17, 2004 | 10:38 PM
  #7  
Karkov's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 133
not to be a **** and i know you didnt ask but i dont think that car looks good at all. matter of fact i dont think that car even looks presentable, but i dont wanna go attomica on ya.
Old Oct 17, 2004 | 11:37 PM
  #8  
cefiro8701's Avatar
Senior Member
iTrader: (7)
 
Joined: May 2004
Posts: 2,397
attomica?wtf is that?
Old Oct 18, 2004 | 09:27 AM
  #9  
NewLoveI30's Avatar
Senior Member
 
Joined: Nov 2003
Posts: 1,860
Originally Posted by cefiro8701
attomica?wtf is that?
Ha Ha... He's a member who dosn't know how to give constructive critisism.

I think the two piece front lip looks killer and I would love to see a better pic of the fog lights.

Karkov, what aspect dont you like?
Old Oct 18, 2004 | 10:17 AM
  #10  
mikeI302k's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 489
those foglights are nice definatly would be intrested in a set of those for the right price.
Old Oct 18, 2004 | 01:42 PM
  #11  
i30ds's Avatar
Armed and Dangerous
iTrader: (8)
 
Joined: Mar 2004
Posts: 4,412
From: Denver, CO
Do you have kits for the A32?
Old Oct 18, 2004 | 03:28 PM
  #12  
cefiro8701's Avatar
Senior Member
iTrader: (7)
 
Joined: May 2004
Posts: 2,397
good question ds...
Old Oct 18, 2004 | 04:52 PM
  #13  
i30ds's Avatar
Armed and Dangerous
iTrader: (8)
 
Joined: Mar 2004
Posts: 4,412
From: Denver, CO
Originally Posted by mikeI302k
those foglights are nice definatly would be intrested in a set of those for the right price.
Why? Those fogs are standard on the 1st gen I30's. They would not even fit your car.
Old Oct 18, 2004 | 07:38 PM
  #14  
cefiro8701's Avatar
Senior Member
iTrader: (7)
 
Joined: May 2004
Posts: 2,397
will our cars look this good with these sideskirts? http://www.evolution.co.jp/

look at the signature kits...you can import them pretty easily...just call them...
Old Oct 18, 2004 | 08:44 PM
  #15  
SYCEFIRO's Avatar
Senior Member
iTrader: (10)
 
Joined: Aug 2000
Posts: 2,065
Originally Posted by Jon_from_OZ
Hi,

Yes these fog lamps are available as well. They were put out as a kit for the Australian market, and include 2 lamps, switch, relay and full fitting instructions.

I am trying to find a better picture (close up) and will post here when/if I find one.

Cost on these is AUD$510 plus shipping.

Regards Jon



HI Jon,

That photo you have attached is the 3 piece I30 Front Spoiler Kit that I test fitted on the I30 in Northern California. You can tell that I used the 3M clear scotch tapes to temporary fit it on the car to take the photos!

I think when ppl ask you about the fog lights, they refer to the A33 projector oval foglights without the corner lights.

SY
sycefiro@yahoo.com



Old Oct 18, 2004 | 10:17 PM
  #16  
Karkov's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 133
Originally Posted by cefiro8701
will our cars look this good with these sideskirts? http://www.evolution.co.jp/

look at the signature kits...you can import them pretty easily...just call them...
Yeah gqmac is the only one in the us that has that kit and i don know the numbers but i rember him sayin he paid an arm and a leg to shipped it over, besides shipping i think he said the kit was 1200 us.
Old Oct 18, 2004 | 11:03 PM
  #17  
Jon_from_OZ's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Oct 2004
Posts: 4
Originally Posted by SYCEFIRO
HI Jon,

That photo you have attached is the 3 piece I30 Front Spoiler Kit that I test fitted on the I30 in Northern California. You can tell that I used the 3M clear scotch tapes to temporary fit it on the car to take the photos!

I think when ppl ask you about the fog lights, they refer to the A33 projector oval foglights without the corner lights.

SY
Hope you dont mind that I used the photo

The photo was to illustrate the lamp kits that we can get (which turns out to be different to the ones in the image of yours). I will have a set on my desk tomorrow morning and will photograph the actual kit components so that there can be no mistake as to what I am offering.

Edit; This has been done, see post higher up in thread

The front lip kits I can supply are a 2 piece that start at the rear of the bumper and wrap around to just below the fog lamps on each side.
Old Oct 19, 2004 | 08:46 PM
  #18  
Jon_from_OZ's Avatar
Thread Starter
Newbie - Just Registered
 
Joined: Oct 2004
Posts: 4
Ive updated the images with the correct ones.

I apologise if I have mislead any one.

Jon
Old Oct 19, 2004 | 09:48 PM
  #19  
NewLoveI30's Avatar
Senior Member
 
Joined: Nov 2003
Posts: 1,860
Anyone else confused by this thread?
Old Oct 20, 2004 | 10:31 AM
  #20  
mikeI302k's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 489
Originally Posted by i30ds
Why? Those fogs are standard on the 1st gen I30's. They would not even fit your car.
i meant the lights with the projectors in them they look like they would fit my car i wanted to have brighter fogs without getting a brighter bulb so i dont burn the harness. which would be solved by the projector.
Old Oct 20, 2004 | 12:45 PM
  #21  
i30ds's Avatar
Armed and Dangerous
iTrader: (8)
 
Joined: Mar 2004
Posts: 4,412
From: Denver, CO
Originally Posted by mikeI302k
i meant the lights with the projectors in them they look like they would fit my car i wanted to have brighter fogs without getting a brighter bulb so i dont burn the harness. which would be solved by the projector.
Gottcha.......
Old Oct 20, 2004 | 01:31 PM
  #22  
Mack Daddy's Avatar
Senior Member
 
Joined: Mar 2004
Posts: 275
I don't want to stir the pot here but I have those fogs (the ones in the pic) on my car and 510$ even if it is Australian $ is pretty steep. I can get them for like 70-80 dollars here with all the harnesses etc.
Old Oct 20, 2004 | 02:58 PM
  #23  
2000Infinitii30's Avatar
Member
 
Joined: Oct 2004
Posts: 69
This thread is mixing my head up! I do howeaver love those angle eyes where did you get them> how hard r they to install?
Old Oct 20, 2004 | 03:04 PM
  #24  
mikeI302k's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 489
yea those seem to be the right lights mack daddy. did anyone every pull thier fogs out to see the harness if it matches the one in the pic from mack daddy? cause if it does then looks like i might just get those.
Old Oct 20, 2004 | 08:36 PM
  #25  
SYCEFIRO's Avatar
Senior Member
iTrader: (10)
 
Joined: Aug 2000
Posts: 2,065
Originally Posted by Jon_from_OZ
Hope you dont mind that I used the photo

The photo was to illustrate the lamp kits that we can get (which turns out to be different to the ones in the image of yours). I will have a set on my desk tomorrow morning and will photograph the actual kit components so that there can be no mistake as to what I am offering.

Edit; This has been done, see post higher up in thread

The front lip kits I can supply are a 2 piece that start at the rear of the bumper and wrap around to just below the fog lamps on each side.

It's ALL GOOD!!
Old Oct 20, 2004 | 08:46 PM
  #26  
MetaOrbit's Avatar
Got Projectors?
iTrader: (19)
 
Joined: Apr 2002
Posts: 3,532
From: Knoxville, TN
Originally Posted by mikeI302k
yea those seem to be the right lights mack daddy. did anyone every pull thier fogs out to see the harness if it matches the one in the pic from mack daddy? cause if it does then looks like i might just get those.
Even if it doesn't it can't be hard to wire otherwise.

Power + Ground. Voila.
Old Oct 20, 2004 | 08:46 PM
  #27  
MetaOrbit's Avatar
Got Projectors?
iTrader: (19)
 
Joined: Apr 2002
Posts: 3,532
From: Knoxville, TN
Originally Posted by SYCEFIRO
It's ALL GOOD!!
Sy,

Did you get my email?

Thanks.
Old Oct 22, 2004 | 10:26 PM
  #28  
kingofsorrow's Avatar
Senior Member
 
Joined: Apr 2003
Posts: 520
Originally Posted by Mack Daddy
I don't want to stir the pot here but I have those fogs (the ones in the pic) on my car and 510$ even if it is Australian $ is pretty steep. I can get them for like 70-80 dollars here with all the harnesses etc.

hey mack i sent you 2 emails about these lights. did you get them?
Old Oct 23, 2004 | 04:07 PM
  #29  
Karkov's Avatar
Senior Member
 
Joined: Oct 2003
Posts: 133
Mack daddy first off do you know what bulbs go in there?? And second do you got any idea ballpark or otherwise of what shipping would be to the good ol U.S.ofA.? I was kinda thinkin if we could gain some interest we could pool together and save on shipping??
Old Oct 23, 2004 | 10:31 PM
  #30  
gqmac2's Avatar
Senior Member
 
Joined: Mar 2003
Posts: 393
Originally Posted by Karkov
Yeah gqmac is the only one in the us that has that kit and i don know the numbers but i rember him sayin he paid an arm and a leg to shipped it over, besides shipping i think he said the kit was 1200 us.

Did someone ring??? LOL... Oh yeah I got the A33 kit. I love it, I can not wait till I get it painted and installed. You can order each part seperatly. Let me know if you want it. I can see what I can do about the shipping charges.
Old Oct 24, 2004 | 03:40 AM
  #31  
Max_Daddy's Avatar
Newbie - Just Registered
 
Joined: Oct 2004
Posts: 5
Hey Guys I Live In Australia And The Prices I Got quoted For The parts you have all Posted up are $249 AUD For The Front Skirts
$461 For The Sides
And $260 For the rear bumper extension
If your wanting the Nissan Fog Lights I purchased mine For $295 AUD From http://www.burgdesign.com.au/catalog...10d344b1f2b070 which was half the price of the exact part from Nissan, I also Purchased There Stainless Steel Door Sills, $95 AUD..

Thats The fog lights Installed,
In that picture You can see the door sills.
instead of going with the Nissan Front And Sides Ive Decided to get aftermarket Lexus Skirts Custom fitted And nissan Sides


Thats the kit There, In The End It Works out at around the same price
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
James92SE
3rd Generation Maxima (1989-1994)
142
Jan 2, 2024 09:23 AM
RinconI30
New Member Introductions
1
Nov 10, 2015 10:55 PM
Pied
4th Generation Maxima (1995-1999)
0
Sep 26, 2015 03:29 PM
Jamie Bolus
General Maxima Discussion
0
Sep 13, 2015 05:56 PM




All times are GMT -7. The time now is 08:21 AM.