Gauging Interest for VIP Front Tables...A33
06-21-2011, 11:10 PM
#1
Member
Thread Starter
Join Date: Mar 2011
Posts: 119
Gauging Interest for VIP Front Tables...A33
I am a bit new to the board....have been a lurker and joined not too long ago finally. I have an A33 (I30) and have made a VIP front table for it....already have fold down tables for the rear but needed a front table. The table will fit the I30/I35/Maxima, any of the three just fine. I can also make tables for other vehicles if i have someone locally that i can get dimensions from. I am established on other forums with positive feedback and have 100% feedback on ebay under my username tsi1991awd...same as on here.
The base plate has an inlay for the cup holder and cigarette box holder/phone holder/whatever you want it to be. Inlay is 1/4" but can be made to any depth...even cut straight through.
The holes in the upper plate are straight through. The edges on both pieces are flame polished, except for the inlay.
The upper plate is held up by 4 rods/spacers. The rods are pressed into the base and then pressed into the bottom of the upper plate. I chose to do it this way so if i want to disssemble the table, i could. These can be glued into place as well for a permanent fit.
Tables can be customized of course....different colors, even upholstered with leather.
If anything, at least let me know what you think of the table...here are some pics. Sorry i am using my phone to post this so i dont have direct links to the images...they are imageshack links.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
The base plate has an inlay for the cup holder and cigarette box holder/phone holder/whatever you want it to be. Inlay is 1/4" but can be made to any depth...even cut straight through.
The holes in the upper plate are straight through. The edges on both pieces are flame polished, except for the inlay.
The upper plate is held up by 4 rods/spacers. The rods are pressed into the base and then pressed into the bottom of the upper plate. I chose to do it this way so if i want to disssemble the table, i could. These can be glued into place as well for a permanent fit.
Tables can be customized of course....different colors, even upholstered with leather.
If anything, at least let me know what you think of the table...here are some pics. Sorry i am using my phone to post this so i dont have direct links to the images...they are imageshack links.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
06-21-2011, 11:28 PM
#3
Member
Thread Starter
Join Date: Mar 2011
Posts: 119
Thanks bro. I am going for VIP styling on my A33. The interior is almost complete...next thing to go on are the coilovers and wheels. Then lip kit and fixing some minor body damage and repainting. Long process but worth it in the end.
06-22-2011, 09:55 AM
#6
Member
Thread Starter
Join Date: Mar 2011
Posts: 119
I can get some more picures of the pieces and od everything put together.
My main focus was getting the table finished....i was going to be using metal brackets to mount the damn thing but i am liking the glass look too much right now. So i am in the process of getting dimensions and trying to work out a way to make some clear brackets to retain this look. If i were covering it or paintin it, metal brackets would not be a problem.
My main focus was getting the table finished....i was going to be using metal brackets to mount the damn thing but i am liking the glass look too much right now. So i am in the process of getting dimensions and trying to work out a way to make some clear brackets to retain this look. If i were covering it or paintin it, metal brackets would not be a problem.
Thread
Thread Starter
Forum
Replies
Last Post
dvcamp
6th Generation Maxima (2004-2008)
7
09-18-2015 10:17 AM