Maximas for Sale / Wanted Have a Maxima that you want to sell? Looking for a Maxima? Let the world know about it. Be sure to include your location in the description!

FS 94 Maxima SE

Thread Tools
 
Search this Thread
 
Old 12-18-2007, 11:12 AM
  #1  
Supporting Maxima.org Member
Thread Starter
 
Maximajism94se's Avatar
 
Join Date: Feb 2002
Location: Gainesville, FL
Posts: 562
FS 94 Maxima SE

I was storing the car to fix up at a later time but the place I am storing the car at is being bulldozed. Engine and trans (auto) in good condition, 173000 miles. Car has suspension issues (won't align) and some dents on front driver side. I have new control arms, tie rod ends and some other misc new parts but I am not exactly sure what parts need replacing. No stereo and driver side window falls down (is propped up right now) Florida title $500 obo
Maximajism94se is offline  
Old 12-18-2007, 01:50 PM
  #2  
Supporting Maxima.org Member
iTrader: (3)
 
bhunter's Avatar
 
Join Date: Aug 2004
Posts: 1,036
If you were closer I would be interested.
bhunter is offline  
Old 12-18-2007, 03:44 PM
  #3  
Senior Member
 
Nismo87SE's Avatar
 
Join Date: Aug 2000
Posts: 2,807
Damn, if only I wasn't so far away .
Nismo87SE is offline  
Old 12-18-2007, 04:58 PM
  #4  
I can has?
iTrader: (14)
 
Pearl93VE's Avatar
 
Join Date: Jul 2006
Location: St. Augustine, FL
Posts: 2,860
I have a friend who is looking for a 3rd gen right now. Do you have any current pictures of it? I'm right over in St. Augustine...

VTC Clack?
Tranny shifts good?
Exhaust Manifold studs?
Condition of Ext. and Int.?

Last edited by Pearl93VE; 12-18-2007 at 06:58 PM.
Pearl93VE is offline  
Old 12-18-2007, 05:17 PM
  #5  
¯\(°_o)/¯
iTrader: (43)
 
Greeny's Avatar
 
Join Date: Sep 2003
Location: Tunasea
Posts: 64,424
Originally Posted by 94maxshima
I have a friend who is looking for a 3rd gen right now. Do you have any pictures of it? I'm right over in St. Augustine...

VTC Clack?
Tranny shifts good?
Exhaust Manifold studs?
Condition of Ext. and Int.?
http://www.cardomain.com/id/maximajism94se
Greeny is offline  
Old 12-18-2007, 06:32 PM
  #6  
I can has?
iTrader: (14)
 
Pearl93VE's Avatar
 
Join Date: Jul 2006
Location: St. Augustine, FL
Posts: 2,860
Originally Posted by MyGreenMax94

Page Updated

May 11, 2003
Pearl93VE is offline  
Old 12-18-2007, 06:50 PM
  #7  
¯\(°_o)/¯
iTrader: (43)
 
Greeny's Avatar
 
Join Date: Sep 2003
Location: Tunasea
Posts: 64,424
Originally Posted by 94maxshima
Page Updated

May 11, 2003
you said pics,not new pics..:
Greeny is offline  
Old 12-18-2007, 06:57 PM
  #8  
I can has?
iTrader: (14)
 
Pearl93VE's Avatar
 
Join Date: Jul 2006
Location: St. Augustine, FL
Posts: 2,860
Originally Posted by MyGreenMax94
you said pics,not new pics..:
Oh. Yeah, sorry. I saw the cardomain pics, but I didn't notice any dents in it so I was hoping he had some newer, too.
Pearl93VE is offline  
Old 12-18-2007, 07:48 PM
  #9  
Supporting Maxima.org Member
Thread Starter
 
Maximajism94se's Avatar
 
Join Date: Feb 2002
Location: Gainesville, FL
Posts: 562
Originally Posted by 94maxshima
I have a friend who is looking for a 3rd gen right now. Do you have any current pictures of it? I'm right over in St. Augustine...

VTC Clack?
Tranny shifts good?
Exhaust Manifold studs?
Condition of Ext. and Int.?
Here's the book:
No VTC noise, engine runs smooth with no check engine light, idle is rough at times in gear, but probably just needs a little adjusting. Studs are fine as far as I know. Trans shifted fine before storage, I started it up recently and just backed the car up, tried neutral and then drove back into the space. I was not able to drive the car through all the gears as it does not have an up to date registration. If you are still interested I can make sure all the gears shift well. Exterior of car has some blemishes. I attached some pics, but it was dark by the time my gf got there with the camera so here's some notes in case you cannot see:
Outside: Scrapes on front bumper cover on passenger side. Driver side front panel has dent in it, not too deep, some rust. Hood has small paint cracks in on both sides at the top from me being an idiot and closing the hood with tools in the engine bay. Roof near sunroof some of the paint is peeling. The pics on my car domain are from when I put 2k into body work, paint on the roof from that job is peeling so there is no danger of rust on the roof. Also when the body work was done I ditched the spoiler as it was trash. The holes are just taped up from underneath for now as I was never able to source a new spoiler. One fog light is busted. Rims look dirty but they are polished aluminum and just need cleaning. As mentioned before the front suspension needs work. The control arms and tie rods ends I have may do it, but who knows.
Inside: Grey cloth material, center console rest and front mats are pretty dingy, rest of carpet/seats are in decent shape, just need light cleaning. As I mentioned before no stereo, rear deck has been chopped up a bit from my previous stereo so you may have to cut a new piece of MDF to put back there. Trunk things are disabled so trunk is heavy, easy fix. A/C works and as far as I know all electronics function correctly.

Worth mentioning is the car does not have a clear title from an accident from before I had it. Some of the body work was not done well so I put 2k into getting body work, repainted, etc. Obviously from the above it does not look perfect now, but the price reflects that I think since the drive train is in good condition.

Let me know, if you need better pics or pics of anything in particular let me know.

Phil 386-717-8742
Attached Thumbnails FS 94 Maxima SE-car-005.jpg   FS 94 Maxima SE-car-004.jpg  

Last edited by Maximajism94se; 12-18-2007 at 08:01 PM.
Maximajism94se is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Goffery2uned
4th Generation Maxima (1995-1999)
9
08-21-2015 09:50 PM
julian888
7th Generation Classifieds (2009-2015)
0
08-06-2015 04:39 AM
julian888
New Member Introductions
1
08-05-2015 08:26 PM



Quick Reply: FS 94 Maxima SE



All times are GMT -7. The time now is 03:24 PM.