CAN-Other 1998 Supercharged Nissan Maxima
1998 Supercharged Nissan Maxima
Supercharger has been sold, car is being reverted to stock and kept in the family.
For Sale I have my 1998 Nissan Maxima SE with 159 XXX KM's. It comes with heated front seats, power front seats (both driver and passenger), power windows and sunroof. The car is very clean inside and out, drives great and is a total sleeper. It currently makes 345WHP Dyno Tuned on a Mustang Dyno with the items/modifications listed below. A lot of time has been spent on this car and proper maintenance has been done.
Pictures: http://s734.photobucket.com/albums/w...ima/?start=all
Videos:
http://www.youtube.com/watch?v=-icTcsj1rQk
http://www.youtube.com/watch?v=sKmzlq-qAq4
Sorry for the bad video's (This was with the old transmission/ES motor mounts weren't installed when I went to the Dyno)
Engine
Vortech V2 Supercharger with 2.87" Pulley ~13.4PSI
3" Charge Piping
Custom Cold Air Intake
Greddy FMIC
Greddy Type-S BOV
JGS Precision BOV
300ZX MAF
ES Motor Mounts
AEM meth kit (tank located in trunk)
Variable Intake from a 2000-2001 Maxima
Deatschwerks 600cc Injectors
Coil Voltage Booster running at 16v
Walbro 255LPH Pump
OBX Headers
Budget Downpipe
Gutted Cat
2.5" Stainless Steel Costume Catback
Vibrant Resonator
Vibrant Muffler with a 45°Down Tip
Transmission
2k1 LSD Transmission (very solid, no grinds, etc. New release bearing ,Amsoil 75W90 Severe Oil)
6 Puck Sprung Bully Clutch
Modified pressure plate to hold over 400Tq
B&M Short Throw Shifter Knock-Off (Awesome Shifter)
Suspension/Tires
Tokico Illuminas Struts, 5-way adjustable
Tein springs 1.75" Drop
Front Strut Bar
Rear Strut Bar
Rear Sway Bar
Exterior
R34 Headlights
PIAA Low Beams and High Beams
Gauges
Innovate Wide Band A/F Gauge
Auto Meter Voltage Gauge
Auto Meter Oil Pressure Gauge
Greddy Boost Gauge
Greddy Fuel Pressure Gauge
Greddy Pyrometer Gauge
Tuning
Greddy E-Manage Ultimate (2-step launch control, timing adjustable, etc)
Custom Plug and Play Harness to revert to stock ECU
I'm asking $6000 FIRM (passed Etest Oct 8,2011) and $6500 with my Rota P45R Rims and Falken Azenis RT615 245/50/18 tires. Rims are flatblack (no pics yet, not on the car). Fastest quarter mile was a 12.8 @ 109MPH (have time slip) and also have the Dyno chart. The car was tracked but with the current transmission it has only be driven on the road (old transmission lost 2nd gear). Can also do a compression test to show its running properly.
With the car will come many spare parts that I have collected over time (mostly from my previous Maxima). Spare Axles, Sensors...to much to list.
If your interested I can be contacted via cell phone @ 613-724-7822. Call or text anytime. If I don't answer leave a message
Thanks
Ron
For Sale I have my 1998 Nissan Maxima SE with 159 XXX KM's. It comes with heated front seats, power front seats (both driver and passenger), power windows and sunroof. The car is very clean inside and out, drives great and is a total sleeper. It currently makes 345WHP Dyno Tuned on a Mustang Dyno with the items/modifications listed below. A lot of time has been spent on this car and proper maintenance has been done.
Pictures: http://s734.photobucket.com/albums/w...ima/?start=all
Videos:
http://www.youtube.com/watch?v=-icTcsj1rQk
http://www.youtube.com/watch?v=sKmzlq-qAq4
Sorry for the bad video's (This was with the old transmission/ES motor mounts weren't installed when I went to the Dyno)
Engine
Vortech V2 Supercharger with 2.87" Pulley ~13.4PSI
3" Charge Piping
Custom Cold Air Intake
Greddy FMIC
Greddy Type-S BOV
JGS Precision BOV
300ZX MAF
ES Motor Mounts
AEM meth kit (tank located in trunk)
Variable Intake from a 2000-2001 Maxima
Deatschwerks 600cc Injectors
Coil Voltage Booster running at 16v
Walbro 255LPH Pump
OBX Headers
Budget Downpipe
Gutted Cat
2.5" Stainless Steel Costume Catback
Vibrant Resonator
Vibrant Muffler with a 45°Down Tip
Transmission
2k1 LSD Transmission (very solid, no grinds, etc. New release bearing ,Amsoil 75W90 Severe Oil)
6 Puck Sprung Bully Clutch
Modified pressure plate to hold over 400Tq
B&M Short Throw Shifter Knock-Off (Awesome Shifter)
Suspension/Tires
Tokico Illuminas Struts, 5-way adjustable
Tein springs 1.75" Drop
Front Strut Bar
Rear Strut Bar
Rear Sway Bar
Exterior
R34 Headlights
PIAA Low Beams and High Beams
Gauges
Innovate Wide Band A/F Gauge
Auto Meter Voltage Gauge
Auto Meter Oil Pressure Gauge
Greddy Boost Gauge
Greddy Fuel Pressure Gauge
Greddy Pyrometer Gauge
Tuning
Greddy E-Manage Ultimate (2-step launch control, timing adjustable, etc)
Custom Plug and Play Harness to revert to stock ECU
I'm asking $6000 FIRM (passed Etest Oct 8,2011) and $6500 with my Rota P45R Rims and Falken Azenis RT615 245/50/18 tires. Rims are flatblack (no pics yet, not on the car). Fastest quarter mile was a 12.8 @ 109MPH (have time slip) and also have the Dyno chart. The car was tracked but with the current transmission it has only be driven on the road (old transmission lost 2nd gear). Can also do a compression test to show its running properly.
With the car will come many spare parts that I have collected over time (mostly from my previous Maxima). Spare Axles, Sensors...to much to list.
If your interested I can be contacted via cell phone @ 613-724-7822. Call or text anytime. If I don't answer leave a message
Thanks
Ron
Last edited by OC_Nooby; Jan 15, 2012 at 09:13 PM.
I would buy this if I had the money!! I love the well kept interior. The car is such a sleeper with that color. Mustang dynos read a little low from other forums I spend my time on!
>.>
<.<
>.>
<.<
Ok, will let this go for $6000. It comes with an Etest, you get the Safety. Can do a compression test, you can check underneath the car (friend has a hoist, going on a limb that he will let me put it up if there is interest
)




