NV 2002 Maxima 6MT HLSD $2500
#1
Supporting Maxima.org Member
Thread Starter
iTrader: (6)
Join Date: Jul 2002
Location: Reno, NV
Posts: 2,063
2002 Maxima 6MT HLSD $2500
I'm in Reno, NV.
I'm selling because I just don't have the time to put into the car to see it finished. It was my daily driver and I needed something newer.
I'm the second owner. The car is in fair condition.
There is a scrape on the passenger side rear door/fender area.
The car has 240000, the short block has 180000. When the original owner had it one of the cylinders kept filling up with oil and so he got it replaced under warranty at the time. Unfortunately the engine still suffers from the oil consumption issue so common in these cars.
I've recently replaced the fuel pump, high pressure power steering line, windshield, coil packs, and valve covers.
There is an issue in the clutch line somewhere. I recently noticed that nearly all the clutch fluid was gone. I refilled it and bled the system, but wherever the leak is isn't too major because I couldn't find the source. I may need a new slave or master cylinder.
It probably needs new brakes. I don't remember when I replaced them last.
Mods:
full cattman exhaust (gen II headers and 3" catback) with a dual O2 simulator
SSIM mod
Koni inserts with HR springs
18" wheels with brand new tires
6th gen front brakes
I never installed but can also throw in:
Sub frame connectors (Truax)
NWP Phenolic Spacers
If you have any other questions, it's best to contact me at hacim007@yahoo.com
I'm selling because I just don't have the time to put into the car to see it finished. It was my daily driver and I needed something newer.
I'm the second owner. The car is in fair condition.
There is a scrape on the passenger side rear door/fender area.
The car has 240000, the short block has 180000. When the original owner had it one of the cylinders kept filling up with oil and so he got it replaced under warranty at the time. Unfortunately the engine still suffers from the oil consumption issue so common in these cars.
I've recently replaced the fuel pump, high pressure power steering line, windshield, coil packs, and valve covers.
There is an issue in the clutch line somewhere. I recently noticed that nearly all the clutch fluid was gone. I refilled it and bled the system, but wherever the leak is isn't too major because I couldn't find the source. I may need a new slave or master cylinder.
It probably needs new brakes. I don't remember when I replaced them last.
Mods:
full cattman exhaust (gen II headers and 3" catback) with a dual O2 simulator
SSIM mod
Koni inserts with HR springs
18" wheels with brand new tires
6th gen front brakes
I never installed but can also throw in:
Sub frame connectors (Truax)
NWP Phenolic Spacers
If you have any other questions, it's best to contact me at hacim007@yahoo.com
Last edited by hacim105; 11-15-2016 at 09:29 AM.