New additions to my 4th gen. *Interior stuff*
#1
Thread Starter
Supporting Maxima.org Member
iTrader: (18)
Joined: Oct 2005
Posts: 1,151
From: Austin, Tx
New additions to my 4th gen. *Interior stuff*
So I had some extra cathodes sitting around and my directwire just came in so I decided to hook em all up today. Also wanted to take some pics of the altima 18's that I recently put on. So here are some pics for yall.
The car w/ the new 18's. I'll drop it this summer along with some lower profile tires.
Hardwired Radar
Mute button located by the steering wheel.
The car w/ the new 18's. I'll drop it this summer along with some lower profile tires.
Hardwired Radar
Mute button located by the steering wheel.
#2
Thread Starter
Supporting Maxima.org Member
iTrader: (18)
Joined: Oct 2005
Posts: 1,151
From: Austin, Tx
In attempt to create some ambient lighting, I mounted a cathode underneath my cupholders and I drilled a couple holes to let the light through. I like the look of it at night with some drinks in the cupholders.
My other cathodes I used for some footwell lighting, On the driver's side, I unintentionally mounted where the plastic panel underneath blocked most of the lights from showing so that is why the passenger side seems a whole lot brighter. (Shot at a very high iso, sorry for the grainy pics)
My other cathodes I used for some footwell lighting, On the driver's side, I unintentionally mounted where the plastic panel underneath blocked most of the lights from showing so that is why the passenger side seems a whole lot brighter. (Shot at a very high iso, sorry for the grainy pics)
#6
Thread Starter
Supporting Maxima.org Member
iTrader: (18)
Joined: Oct 2005
Posts: 1,151
From: Austin, Tx
cathodes look like this
Brad - Yah I love the water bottle tooo, i might start carrying around water bottles for looks
#11
http://www.nissanclub.com/forums/car...1-4th-way.html
Some of the lighting I did in my 3rd gen alti, I've got cathodes and LED's
Many more pics in the first link.
I like that cup holder idea... might have to snag that
Some of the lighting I did in my 3rd gen alti, I've got cathodes and LED's
Many more pics in the first link.
I like that cup holder idea... might have to snag that
#18
Thread Starter
Supporting Maxima.org Member
iTrader: (18)
Joined: Oct 2005
Posts: 1,151
From: Austin, Tx
I ordered a directwire from the escort site and with the direct wire I tapped into the positive wire leading into my cigarette lighter with the provided 3m tap and then routed the negative wire to a ground on my car. Then I routed the cord up my A pillar up along the headliner. The switch just comes up from underneath my steering wheel mounted with velcro that was provided.
Thread
Thread Starter
Forum
Replies
Last Post
James92SE
3rd Generation Maxima (1989-1994)
142
01-02-2024 09:23 AM
CAN-Toronto 97 SE BLACK w/ BLACK. PART OUT.
worldwiderecognized
4th Generation Classifieds (1995-1999)
2
09-24-2015 06:56 PM