Last pics for the year....
#1
Last pics for the year....
These will be the last pics of the car for while as it will be going in a garage (I'll still be driving it for a little while longer) and going through a complete tear down. A list of things to expect for when it comes back in 2009
Exterior
-Carbon fiber hood
-Carbon fiber trunk/spoiler
-Half size rear window spoil
-Roof painted black
-Front lip painted black
-Stillen Rear Valence in Black
-Turn signal mirror shells in black(maybe)
Interior
-Interior pieces in black
-Carbon fiber Gauge face
-Corbeau Seats
-Belt Harness bar (deusexmaxima)
-350z Steering Wheel
Suspension
-New LCAs with balljoints
-Eibach Ground control springs
-Blemcho LTB stage 1 made into stage 2
-Fender braces
-an assortment of other custom bracing
Engine
-Q45(vh45de) throttle body
-Pathfinder UIM
-VQ35 Cams
-HR Valve Springs
-Port/polish
-1mm Oversize valves
-Q45(vh45de) piston rings
-VQ35 oil pump
-3" exhaust from y-pipe joint back
-90mm MAF
-Emanage Ultimate
-Auto to Manual swap
-Fidanza Flywheel
There will be a build project thread of all the progress I will be making on the current build in another month or so. I am forgeting something in the list, so enjoy the pics.
Exterior
-Carbon fiber hood
-Carbon fiber trunk/spoiler
-Half size rear window spoil
-Roof painted black
-Front lip painted black
-Stillen Rear Valence in Black
-Turn signal mirror shells in black(maybe)
Interior
-Interior pieces in black
-Carbon fiber Gauge face
-Corbeau Seats
-Belt Harness bar (deusexmaxima)
-350z Steering Wheel
Suspension
-New LCAs with balljoints
-Eibach Ground control springs
-Blemcho LTB stage 1 made into stage 2
-Fender braces
-an assortment of other custom bracing
Engine
-Q45(vh45de) throttle body
-Pathfinder UIM
-VQ35 Cams
-HR Valve Springs
-Port/polish
-1mm Oversize valves
-Q45(vh45de) piston rings
-VQ35 oil pump
-3" exhaust from y-pipe joint back
-90mm MAF
-Emanage Ultimate
-Auto to Manual swap
-Fidanza Flywheel
There will be a build project thread of all the progress I will be making on the current build in another month or so. I am forgeting something in the list, so enjoy the pics.
#6
#7
lawls, very baller. well im in for pics of progress. i think once you get it done it could be pretty nice. getting leather corbeau seats?
#8
#10
I forgot to mention the brakes
which will be 300zx calipers front and rear
with 13" rotors up front and Hawk HP+ pads
also a different set of rims
zigen 17x10 43 offset with 275s in hyper black or silver
which will be 300zx calipers front and rear
with 13" rotors up front and Hawk HP+ pads
also a different set of rims
zigen 17x10 43 offset with 275s in hyper black or silver
#15
Nope, just busting my *** at one job and second job about to start, I am selling alot of stuff off the car as I swap out the parts. As of so far the Axle back Frankencar is taken, as with the megan b-pipe is taken.
Last edited by DrunkieTheBear; 05-27-2008 at 03:53 AM.
#18
DAMN!!! Thats a huge list. A quick estimate runs over 5K in parts not including the rims or manual swap. Going to be a completely new car. Good luck and definitely a project worth taking lots of pics......
#19
unless you have most of the parts already, i'd say look into something that was designed as less of a family car and more as a sports car
cutler would love if you bought a miata....
#20
i'm not trying to bash you or anything, just asking questions, but are you sure you want to drop that much cash into the maxima
unless you have most of the parts already, i'd say look into something that was designed as less of a family car and more as a sports car
cutler would love if you bought a miata....
unless you have most of the parts already, i'd say look into something that was designed as less of a family car and more as a sports car
cutler would love if you bought a miata....
You know I thought about it but then I got to thinking that it would be different to see it done with a maxima. Plus by the time i'm done my chasis should be so stiff I will lift my inner front wheel through corners. (hopefully)
the real question is biggles, can I haz your sports car?
#21
actually about 4k with manual swap (I got all the parts for $200, tranny has 50K miles) but without brakes and rims. I will be selling things so I am hoping to make back about 1.5k of it. So really its not that expensive.
#22
LOL I bet cutler would
You know I thought about it but then I got to thinking that it would be different to see it done with a maxima. Plus by the time i'm done my chasis should be so stiff I will lift my inner front wheel through corners. (hopefully)
the real question is biggles, can I haz your sports car?
You know I thought about it but then I got to thinking that it would be different to see it done with a maxima. Plus by the time i'm done my chasis should be so stiff I will lift my inner front wheel through corners. (hopefully)
the real question is biggles, can I haz your sports car?
#23
sure, and a rear differential from a titan
The original idea of this car was to get it to where I think its how nissan should've released my gen maxima, I've done that. Now its time to finish the car as a track car, don't worry come january I will be driving another car (c43)
The original idea of this car was to get it to where I think its how nissan should've released my gen maxima, I've done that. Now its time to finish the car as a track car, don't worry come january I will be driving another car (c43)
#24
sure, and a rear differential from a titan
The original idea of this car was to get it to where I think its how nissan should've released my gen maxima, I've done that. Now its time to finish the car as a track car, don't worry come january I will be driving another car (c43)
The original idea of this car was to get it to where I think its how nissan should've released my gen maxima, I've done that. Now its time to finish the car as a track car, don't worry come january I will be driving another car (c43)
(no, not the Citroen)
#25
Citreon are put together by french people that think glue will hold it together. renault is the same way
a 2000 MB c43 with a c55 7-speed tranny swap, SC and dropped on coilovers. Its been done once and I will be the next to it.
a 2000 MB c43 with a c55 7-speed tranny swap, SC and dropped on coilovers. Its been done once and I will be the next to it.
#26
that sounds crazy
you should build a REAL car
something you can sale later and get good money for
#28
#29
Get rid of that rear spoiler .... it ruins the whole "clean" thing.
#30
#31
#33
sure, and a rear differential from a titan
The original idea of this car was to get it to where I think its how nissan should've released my gen maxima, I've done that. Now its time to finish the car as a track car, don't worry come january I will be driving another car (c43)
The original idea of this car was to get it to where I think its how nissan should've released my gen maxima, I've done that. Now its time to finish the car as a track car, don't worry come january I will be driving another car (c43)