*PICS* of my R34 Retrtofit
.still looks great tho, one is better than none. Ive also always enjoyed the look of your car mastere, gold/black ftw. If I ever get another 4th gen (which is likely in the future) I want a pebble beige with a black leather interior, 5spd, and then do the carbon fiber hood, trunk, and lip kit
Last edited by black_maxed95; Jul 21, 2008 at 06:31 AM.
Thread Starter
Senior Member
iTrader: (17)
Joined: Sep 2007
Posts: 477
From: pembroke pines, florida
+2, Im not going to do mine unless I do them both.
still looks great tho, one is better than none. Ive also always enjoyed the look of your car mastere, gold/black ftw. If I ever get another 4th gen (which is likely in the future) I want a pebble beige with a black leather interior, 5spd, and then do the carbon fiber hood, trunk, and lip kit
still looks great tho, one is better than none. Ive also always enjoyed the look of your car mastere, gold/black ftw. If I ever get another 4th gen (which is likely in the future) I want a pebble beige with a black leather interior, 5spd, and then do the carbon fiber hood, trunk, and lip kit
thanks, the sig pic is old tho, I now have the r34s, different bumper lights, and removed license plate.
Thread Starter
Senior Member
iTrader: (17)
Joined: Sep 2007
Posts: 477
From: pembroke pines, florida
Thread Starter
Senior Member
iTrader: (17)
Joined: Sep 2007
Posts: 477
From: pembroke pines, florida
Thread Starter
Senior Member
iTrader: (17)
Joined: Sep 2007
Posts: 477
From: pembroke pines, florida
Ok here are some night time pics with a much better camera. 1st is the cut off w/o fog lights on. i need to aim the left one lil higher. and theres a little patch on the left one that bothers the s**t outta me. gotta mess around with it some.
now with fog lights on
and now sum random shots.
tomorrow ill replace the first pictures with some taken with a better camera.
now with fog lights on
and now sum random shots.
tomorrow ill replace the first pictures with some taken with a better camera.
VERY nice retro with an awesome output. Cutoff looks really good.
FYI, when you raise the drivers side, you will need to raise the passengers side as well to try and get the cutoff in the middle aligned together as close as possible.
FYI, when you raise the drivers side, you will need to raise the passengers side as well to try and get the cutoff in the middle aligned together as close as possible.
Junior Member
Joined: Jul 2008
Posts: 24
From: Greenwood Lake NY
Well I spent a good few hours reading through HIDplanet.com. MY head is spinning. I think I want to do this, and I can handle the electronics park, like a walk in the park, but I am so confused about what lamps to pick and such. Also, how much do these things cost? My stock housings are shot, what replacement housings to you recommend?
Isn't the edges of the reflection supposed to be blue? Why are yours yellow? Is that because of the 6000k?
HIDplanet recommends 4300k, and I understand why.
Isn't the edges of the reflection supposed to be blue? Why are yours yellow? Is that because of the 6000k?
HIDplanet recommends 4300k, and I understand why.
Well I spent a good few hours reading through HIDplanet.com. MY head is spinning. I think I want to do this, and I can handle the electronics park, like a walk in the park, but I am so confused about what lamps to pick and such. Also, how much do these things cost? My stock housings are shot, what replacement housings to you recommend?
Isn't the edges of the reflection supposed to be blue? Why are yours yellow? Is that because of the 6000k?
HIDplanet recommends 4300k, and I understand why.
Isn't the edges of the reflection supposed to be blue? Why are yours yellow? Is that because of the 6000k?
HIDplanet recommends 4300k, and I understand why.
Disagree. It's a matter of preference, but I like just two levels of cutoff (i.e. lights aimed identically) as opposed to low-mid-high left to right.
yup, fresnel valeo projectors were used for this setup. Im not exactly sure what could be causing that dark spot on the very corner possibly the shroud getting in the way of the output?
Thread Starter
Senior Member
iTrader: (17)
Joined: Sep 2007
Posts: 477
From: pembroke pines, florida
no its the way the bulb sits in the housing. im not using a d2s im using the d2c which is like a universal fit for the d2r and d2s. im gonna play around with it a little bit to try to fix it
Thread
Thread Starter
Forum
Replies
Last Post
Maxima_Joe
4th Generation Classifieds (1995-1999)
16
Nov 25, 2015 08:19 AM