Maxima Forums - Not a Maxima, but in the VQ family. :)

Maxima Forums (https://maxima.org/forums/)

- Members Rides (https://maxima.org/forums/members-rides-65/)

- - Not a Maxima, but in the VQ family. :) (https://maxima.org/forums/members-rides/601580-not-maxima-but-vq-family.html)

Not a Maxima, but in the VQ family. :)

FULLY Built Motor
Darton Mid Sleeves Bored .030 over (decked, honed, bored, line honed, bearings)
CP pistons 8.5:1 compression
Carillo Rods
Ferrera 1mm oversized Valves
Titanium Valve springs
Valve locks
Spring locators
5 angle valve job
Tomei 268 cams
Balanced Crank
Revup oil pump
Nismo thermo
HKS metal head gasket
Custom L19 Studs
ARP Rod Bolts
ARP Main Studs
Walbro 255 fuel pump
RC 750cc injectors
Fluidamper Harmonic Crank Dampener
Cooling mod (DA Tank, lines, fittings, etc)
Greddy Twin Turbo Kit (turbos, BOV, piping, etc)
Greddy Intercooler
Greddy PRofec B-specII Boost Controller
SGP Racing oil cooler
SGP Racing fuel return system
Aeromotive FPR
SGP Racing Wastegate reloction kit with open dumps
SGP Racing 3" downpipes
AAM Dual 3" exhaust
Cusco air deverter plate
Nismo Oil cap
Samco Hoses
PWR Radiator
Carbonetics Triple Disc Clutch / Flywheel
Nitrous Express wet kit
Nitrous Express purge solenoid
Zex Bottle heater
Dynotune Nitrous TPS/Window switch
Suspension/Brakes
HKS Hipermax III coilovers
APS strut tower brace
Stoptech Stage 2 Brakes
(Axxis Pads, Steel Braided Lines, Slotted Rotors, Race fluid)
Interior
JVC DVD audiophile headunit
Farenheit 7" screen in navigation cubby hole
Infinity Reference components 6.5"
Infinity Reference coaxils 5.25"
Diamond Audio (2) 8" subwoofers
Memphis Audio 1000D (1100 x 1 @ 1 ohm...running at 300 x 2 watts @ 4 ohm)
Phoenix Gold ZX475 titanium amp (75 x 4 @ 4 ohms) OLD SCHOOL Phoenix Gold.
Defi Boost Gauge with Defi Controller
FCON VPRO Stand alone EMS (with Knock AMP and Wide band)
Uprev Osiris reflash
Blitz Throttle Control (no more drive-by-wire lag)
Hidden NX bottle in gym back - switches in ashtray
Clifford Alarm with remote start
Exterior
S2000 Antenna
Rear setup
Drag -BFG Drag Radials (275/35/18) on Stock 18s
Street - Street tires BFG KDW (255/40/18) on stock 18s
5zigen fn01r-c 18x9.5 Toyo Proxy T1R (285/35/10)
Front setup
BFG KDWs (245/35/18) on stock 18
5zigen fn01r-c 18x8.5 Toyo Proxy T1R (255/35/18)

As she sat with bolt ons and nitrous... (old rims too)
http://i127.photobucket.com/albums/p...7/350zside.jpg
Sleeved block in the bag...woot!
http://i127.photobucket.com/albums/p...MAGE_00155.jpg
bagged up heads with tomei cams...
http://i127.photobucket.com/albums/p...MAGE_00157.jpg
http://i127.photobucket.com/albums/p...MAGE_00158.jpg
http://i127.photobucket.com/albums/p...MAGE_00159.jpg

what heads are they?

my goodness thats a long list.. :eek:

i'm liking the stock look though.. very nice car!!

Quote:

Originally Posted by DrunkieTheBear (Post 7263264)

what heads are they?

G&G race motors did the block and the heads. full port n polish. 5 angle valve job, yada yada yada....everything you can possibly do to the heads has been done.

Quote:

Originally Posted by NismoVQdet? (Post 7263303)

my goodness thats a long list.. :eek:

i'm liking the stock look though.. very nice car!!

the list keeps growing too. lol. still have a slew of parts in the garage i need to get in before saturday. *sigh*

once i get those parts in, that old dyno posted above will increase by a good 300whp. :)

and I <3 sleepers. reluctantly gonna have to put on a body kit once I go full "purpose built" for road racing tho.

I love the emblem, nice touch

your the same guy in houston imports huh?? nice build!

That car is awesome. Pure sex...

Quote:

Originally Posted by maxima.713 (Post 7263456)

your the same guy in houston imports huh?? nice build!

yea. old school on there tho.

what made you join here? just curious not being a ***. lol

Greddy TT = sex

Wise choice on actually building the motor properly before F/I...there are so many horror stories of people just dropping in bolt-on TT kits on the VQ35 and blowing the engine up shortly after

Sleepah!!! Nice work!!

Need bigger brakes anytime soon?

Quote:

Originally Posted by maxima.713 (Post 7263654)

what made you join here? just curious not being a ***. lol

friend is on here.

i know where g&g is! how do you like that crazy guard dog they have? lol cool people though.

Quote:

Originally Posted by rroderiques77 (Post 7263781)

Sleepah!!! Nice work!!

Need bigger brakes anytime soon?

yea, BBKs are in the plans. Hoping to pick up a sponsor in that depart as well as tires. I'll be burning both up alot on a road course. By lap 4 at motorsport ranch, the brade fade is so bad you don't wanna push the car anymore. the stage 2 stoptechs are good for the street, but you gotta have BBKs for the track.

Nice! That's a long list...

Can't even imagine how much money you've spent on that haha

Quote:

Originally Posted by KK07 (Post 7266346)

Nice! That's a long list...

Can't even imagine how much money you've spent on that haha

don't remind me. lol. :bawling:

nice car you got there lol! i'm assuming your also on my350z correct?

Quote:

Originally Posted by BuiltnBoostedZ (Post 7266109)

I bet!! Hopefully Wilwood or Baer.

AP racing, Wilwood, Stoptech, Endless, Project Mu, Brembo...whoever will supply me parts I can regularly destroy at the track. lol

yep, been on my350 since 05, G4

very subtle/sleeper on the outside, i like!

soo nicee!!!! :drool1:

Talk about a sleeper....... So how many peoples jaws dropped so far?