First time owner and loving my car
05-05-2011, 06:55 PM
#4
Member
Thread Starter
Join Date: Apr 2011
Posts: 115
not in NYC roads bro, LMAO the roads here are getting worse by the years, actually the buttom of our car was scrapped just recenty cause the road was so bad it had like a HUMP or mini hill in the middle of the right lane that scrapped the buttom of the car, OUCH!! i told my wife dont pass there ever again, hahaha
05-05-2011, 08:55 PM
#5
not in NYC roads bro, LMAO the roads here are getting worse by the years, actually the buttom of our car was scrapped just recenty cause the road was so bad it had like a HUMP or mini hill in the middle of the right lane that scrapped the buttom of the car, OUCH!! i told my wife dont pass there ever again, hahaha
lol
05-05-2011, 09:22 PM
#6
Member
Thread Starter
Join Date: Apr 2011
Posts: 115
05-06-2011, 06:27 AM
#10
Member
Thread Starter
Join Date: Apr 2011
Posts: 115
heck yea, but i wanna make sure the engine gets a first class spa treatment first XD but am planning to swap out all the interior lights and put LED's and change the tail lights to clear LED's, interior under dash lighting and double Din DVD player with iphone 4 compatibility and bluetooth, change the grill and a bunch more XD
05-06-2011, 06:29 AM
#11
Member
Thread Starter
Join Date: Apr 2011
Posts: 115
yup, i would love a low ride, i was even considering putting low profile tires on there but man these road conditions, my cause had low profile tires on his ride and ended bending his rim >.>
05-07-2011, 07:58 PM
#14
Member
Thread Starter
Join Date: Apr 2011
Posts: 115
here is a shot of the mini hill i was talking about, was trying to get a close up shot but couldnt get the camera to focus properly 
close up you can see how many victoms that hump claimed from all the scratch marks on it, lol
As you can see no one is that lane XD
close up you can see how many victoms that hump claimed from all the scratch marks on it, lolAs you can see no one is that lane XD
05-07-2011, 09:46 PM
#15
Senior Member
Join Date: May 2010
Location: inside my own mind
Posts: 1,506
heck yea, but i wanna make sure the engine gets a first class spa treatment first XD but am planning to swap out all the interior lights and put LED's and change the tail lights to clear LED's, interior under dash lighting and double Din DVD player with iphone 4 compatibility and bluetooth, change the grill and a bunch more XD
Here's a link for some tail lights you might be interested in:
http://www.ezkoncepts.com/
Interior lights:
http://forums.maxima.org/general-max...nk-lights.html
Can get LED strips for foot wells, switchbacks, LED turn signal bulbs, etc here: http://www.v-leds.com/
05-08-2011, 05:58 AM
#16
Member
Thread Starter
Join Date: Apr 2011
Posts: 115
Sounds good man, can't wait to see how the ride is gonna turn out. Hopefully, you'll keep your page updated as you add mods to it.
Here's a link for some tail lights you might be interested in:
http://www.ezkoncepts.com/
Interior lights:
http://forums.maxima.org/general-max...nk-lights.html
Can get LED strips for foot wells, switchbacks, LED turn signal bulbs, etc here: http://www.v-leds.com/
Here's a link for some tail lights you might be interested in:
http://www.ezkoncepts.com/
Interior lights:
http://forums.maxima.org/general-max...nk-lights.html
Can get LED strips for foot wells, switchbacks, LED turn signal bulbs, etc here: http://www.v-leds.com/
05-08-2011, 02:18 PM
#17
Senior Member
Join Date: May 2010
Location: inside my own mind
Posts: 1,506
Can't wait to see what they look like installed. But, I don't know about the chrome door post strips. It'll make it look riced out in my honest opinion.
Used to have chrome door handles and what nots but eventually took them off because they started looking hella cheesy to me after a little bit.
Used to have chrome door handles and what nots but eventually took them off because they started looking hella cheesy to me after a little bit.
, Clean ride, keep it up.
05-15-2011, 11:59 AM
#21
Member
Thread Starter
Join Date: Apr 2011
Posts: 115
i did one on the back license plate and i wanna do the glove compartment but good lord i cant seems to be able to get that bulb out :O its in such a tight space, and i dont want to use a flathead screw driver cause am scared the bulb might break up in the socket, they gotta be a way to remove that bulb.
05-15-2011, 09:29 PM
#23
Senior Member
Join Date: May 2010
Location: inside my own mind
Posts: 1,506
i did one on the back license plate and i wanna do the glove compartment but good lord i cant seems to be able to get that bulb out :O its in such a tight space, and i dont want to use a flathead screw driver cause am scared the bulb might break up in the socket, they gotta be a way to remove that bulb.
05-16-2011, 05:57 AM
#24
Member
Thread Starter
Join Date: Apr 2011
Posts: 115
06-01-2011, 05:53 PM
#32
Member
Thread Starter
Join Date: Apr 2011
Posts: 115
06-08-2011, 05:25 PM
#33
Member
Thread Starter
Join Date: Apr 2011
Posts: 115
ok so didnt finish posting the rest of the shots of my car so gonna post some more shots.
http://smg.photobucket.com/albums/v338/allthatinny/Car/
the link takes you to the album with more shots, there is alot of things i changed out, and will be changing as the time goes by, so soon it will go through a updated new look
http://smg.photobucket.com/albums/v338/allthatinny/Car/
the link takes you to the album with more shots, there is alot of things i changed out, and will be changing as the time goes by, so soon it will go through a updated new look
Thread
Thread Starter
Forum
Replies
Last Post
Lakersallday24
6th Generation Maxima (2004-2008)
10
06-16-2019 01:35 AM
Team STILLEN
Autocrossing and Road Course Racing
0
08-10-2015 04:29 PM