New pix of Ionic Dynamics Kit WITH MaxSpeed springs!
Thread Starter
Senior Member
Joined: Aug 2001
Posts: 684
New pix of Ionic Dynamics Kit WITH MaxSpeed springs!
I had my MaxSpeed springs installed on Saturday by Nismo and Iilac (TurDz was there for support and detailing 
) It was fun being there and helping the guys out with some work, and Nismo's parents are super cool! 
The drop is still barely noticeable because the springs havent settled and because we did not cut the bumpstops(don't know if I had to), but we took some pix of what we did.
The pix are a little dark, but thats when we finished and decided to take the pictures. I'll take more pictures in the future when I get my AGX's. So far I love the drop and ride, its a blast.
Well, here they are:
http://mozy.cx/maxima/idkit/
Thanks again Nismo and Iilac!!
) It was fun being there and helping the guys out with some work, and Nismo's parents are super cool! The drop is still barely noticeable because the springs havent settled and because we did not cut the bumpstops(don't know if I had to), but we took some pix of what we did.
The pix are a little dark, but thats when we finished and decided to take the pictures. I'll take more pictures in the future when I get my AGX's. So far I love the drop and ride, its a blast.
Well, here they are:
http://mozy.cx/maxima/idkit/
Thanks again Nismo and Iilac!!
Thread Starter
Senior Member
Joined: Aug 2001
Posts: 684
thanks for all the support guys
Nismo: no scraping (knock on wood)!
malik: getting bigger every year, we would have had more people, but this was a 'special' meet, meaning helping hands only
it was fun installing the springs (or in my case wathching the install).
I love the drop, i can't wait untill it settles and untill I get kyb agx's.
I tried taking the freeway onramps at a higher speed today, it was FUUUUUUN!
Nismo: no scraping (knock on wood)!
malik: getting bigger every year, we would have had more people, but this was a 'special' meet, meaning helping hands only
it was fun installing the springs (or in my case wathching the install).I love the drop, i can't wait untill it settles and untill I get kyb agx's.
I tried taking the freeway onramps at a higher speed today, it was FUUUUUUN!
Originally posted by mozy
thanks for all the support guys
Nismo: no scraping (knock on wood)!
malik: getting bigger every year, we would have had more people, but this was a 'special' meet, meaning helping hands only it was fun installing the springs (or in my case wathching the install).
I love the drop, i can't wait untill it settles and untill I get kyb agx's.
I tried taking the freeway onramps at a higher speed today, it was FUUUUUUN!
thanks for all the support guys
Nismo: no scraping (knock on wood)!
malik: getting bigger every year, we would have had more people, but this was a 'special' meet, meaning helping hands only
it was fun installing the springs (or in my case wathching the install).I love the drop, i can't wait untill it settles and untill I get kyb agx's.
I tried taking the freeway onramps at a higher speed today, it was FUUUUUUN!
Thread Starter
Senior Member
Joined: Aug 2001
Posts: 684
Originally posted by AdMax98
Lookin sweet!
PLEASE get some pics during the day!
Btw, almost done paiting my kit, cant wait!
Lookin sweet!
PLEASE get some pics during the day!
Btw, almost done paiting my kit, cant wait!
AdMax98: I'll try to get some daytime pix, I'll probably have someone take them on the 28th.
ILoveMyMax: should be 1.7 front and 1.5 rear, I'm not too sure thought, but that drop in the pix is way less because we JUST installed the springs and they havent had time to settle down yet.
njmaxseltd: thanks so much, I actually learned alot from reading your posts, because before I bought my MaxSpeed springs I was going to buy H&R's, then B&G's and I've read alot of your posts.
meccanoble: license plate numbers????? i thouhght I took them all out...ill go back and check, thanks!
Very Sexy!
Guest
Posts: n/a
Re: New pix of Ionic Dynamics Kit WITH MaxSpeed springs!
Originally posted by mozy
I had my MaxSpeed springs installed on Saturday by Nismo and Iilac (TurDz was there for support and detailing ) It was fun being there and helping the guys out with some work, and Nismo's parents are super cool!
The drop is still barely noticeable because the springs havent settled and because we did not cut the bumpstops(don't know if I had to), but we took some pix of what we did.
The pix are a little dark, but thats when we finished and decided to take the pictures. I'll take more pictures in the future when I get my AGX's. So far I love the drop and ride, its a blast.
Well, here they are:
http://mozy.cx/maxima/idkit/
Thanks again Nismo and Iilac!!
I had my MaxSpeed springs installed on Saturday by Nismo and Iilac (TurDz was there for support and detailing
) It was fun being there and helping the guys out with some work, and Nismo's parents are super cool! The drop is still barely noticeable because the springs havent settled and because we did not cut the bumpstops(don't know if I had to), but we took some pix of what we did.
The pix are a little dark, but thats when we finished and decided to take the pictures. I'll take more pictures in the future when I get my AGX's. So far I love the drop and ride, its a blast.
Well, here they are:
http://mozy.cx/maxima/idkit/
Thanks again Nismo and Iilac!!
What size are those wheels in the pics?
Originally posted by Iilac
Hell yes it is lowered,
It took us 6 hours to get it like that!!!!!
Hell yes it is lowered,
It took us 6 hours to get it like that!!!!!
yea it should have gone alot faster
Originally posted by Nismo
half of that time was fumbling around with the damn spring compressor getting stuck yea it should have gone alot faster
half of that time was fumbling around with the damn spring compressor getting stuck
yea it should have gone alot faster
It was funny when you guys were telling me to stand right in front of the strut mounts so I could possibly get hit by it if the spring uncompressed
Originally posted by TurDz
lol...we put them on backwards, that wasn't too clever.
It was funny when you guys were telling me to stand right in front of the strut mounts so I could possibly get hit by it if the spring uncompressed
lol...we put them on backwards, that wasn't too clever.
It was funny when you guys were telling me to stand right in front of the strut mounts so I could possibly get hit by it if the spring uncompressed
Thread
Thread Starter
Forum
Replies
Last Post
BPuff57
Advanced Suspension, Chassis, and Braking
33
Apr 16, 2020 05:15 AM
MaxLvr21
5th Generation Maxima (2000-2003)
14
Oct 17, 2015 12:11 PM
JakeOfAllTrades
7th Generation Maxima (2009-2015)
1
Sep 30, 2015 03:16 PM
Pied
4th Generation Maxima (1995-1999)
0
Sep 26, 2015 03:29 PM