General Maxima Discussion This a general area for Maxima discussions for all years. For more specific questions, visit one of the generation-specific forums.

ran my first timed 1/4 ever.....

Thread Tools
 
Search this Thread
 
Old Sep 13, 2000 | 07:35 AM
  #1  
Guest
Guest
 
Posts: n/a
I have had the car for 20 months and just got a g-tech to give me some times. Ran 15.29 @ 94.9 mph. My best 0-60 was 7 sec though. I hate the dang (lack of) launch though! Not bad for my first set of times. Also ran 15.37 and 15.41. I am getting the VB in about 2 weeks, and switching to CAI, so hopefully I can punch into the 14's when the weather gets cooler down here in Tejas! 14 seconds....here I come!
Old Sep 13, 2000 | 08:08 AM
  #2  
mingo's Avatar
Senior Member
iTrader: (4)
 
Joined: Aug 2000
Posts: 6,541
From: Bay Area, CA
o deng

i ran 15.333 wiht my lady stripped down to nothing. it was at a track tho sears race way
Old Sep 13, 2000 | 08:14 AM
  #3  
CoolMax's Avatar
is invisible
iTrader: (7)
 
Joined: Aug 2000
Posts: 11,778
From: DFW
Look who's carrying the torch now...

Originally posted by BlackMax13
I have had the car for 20 months and just got a g-tech to give me some times. Ran 15.29 @ 94.9 mph. My best 0-60 was 7 sec though. I hate the dang (lack of) launch though! Not bad for my first set of times. Also ran 15.37 and 15.41. I am getting the VB in about 2 weeks, and switching to CAI, so hopefully I can punch into the 14's when the weather gets cooler down here in Tejas! 14 seconds....here I come!
Nice work
What mods do you already have? and what do you plan on putting in?
14s wouldn't be a long shot for you...just watch out for that traction/launch problem.
Old Sep 13, 2000 | 09:26 AM
  #4  
Guest
Guest
 
Posts: n/a
Re: Look who's carrying the torch now...

Well peformance wise:
Stillen intake, Stillen ECU, Cattman Y-pipe, Stillen B-pipe, HKS exhaust,
Handling:
Eibach/Tokicos setup, Stillen FSTB, Addco RSB

I am going for the VB mod, CAI and still pondering making a heat shield.....what else is left performance wise while still staying NA? I want to be non-juiced /non-inducted sleeper.
Old Sep 13, 2000 | 11:04 AM
  #5  
NeO OnE 2
Guest
 
Posts: n/a
Re: Re: Look who's carrying the torch now...

Originally posted by BlackMax13
Well peformance wise:
Stillen intake, Stillen ECU, Cattman Y-pipe, Stillen B-pipe, HKS exhaust,
Handling:
Eibach/Tokicos setup, Stillen FSTB, Addco RSB

I am going for the VB mod, CAI and still pondering making a heat shield.....what else is left performance wise while still staying NA? I want to be non-juiced /non-inducted sleeper.
Congrads... not bad at all. But I believe that the mph is off because you used a Gtech.
Old Sep 13, 2000 | 12:43 PM
  #6  
Guest
Guest
 
Posts: n/a
are the G-tech mph unreliable? n/m

n/m
Old Sep 13, 2000 | 01:35 PM
  #7  
Blu Max's Avatar
Senior Member
 
Joined: Aug 2000
Posts: 572
Re: Re: Look who's carrying the torch now...

Originally posted by BlackMax13
Well peformance wise:
Stillen intake, Stillen ECU, Cattman Y-pipe, Stillen B-pipe, HKS exhaust,
Handling:
Eibach/Tokicos setup, Stillen FSTB, Addco RSB

I am going for the VB mod, CAI and still pondering making a heat shield.....what else is left performance wise while still staying NA? I want to be non-juiced /non-inducted sleeper.
What else is left? Get extrude honed intake and exhaust manifolds, ported/polished heads, big throttle body. 14's easy.
Old Sep 13, 2000 | 03:38 PM
  #8  
mhgsx's Avatar
Member
 
Joined: Aug 2000
Posts: 60
are the G-tech mph unreliable? n/m

for most cars...yes. They tend to read a couple of miles faster. but I've found that the times are pretty much dead on. the max difference I've experienced was 0.1 sec for the 1/4 mile.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vybz05
Audio and Electronics
1
Dec 10, 2015 07:38 PM
cruce91
Infiniti I30/I35
6
Sep 20, 2015 10:23 AM
Alberto10mg
5th Generation Maxima (2000-2003)
2
Aug 25, 2015 12:54 PM
t6378tp
4th Generation Classifieds (1995-1999)
0
Aug 24, 2015 07:03 AM
Viralkill
General Maxima Discussion
2
Aug 16, 2015 05:09 PM




All times are GMT -7. The time now is 03:29 PM.