Im planning to do a grill mesh where the foglight is supposed to be, my car is GXE so there no fog on it...my idea is cut the bumper(theres a mark on it, where the se had the fog lights)

does any body have this??? or what do you think about the look

 

any??

 

yea i made that homemade mesh grilll from home depot..i have a 97 gxe and i put it in the middle part, the thin license plate part and the fog light parts...it looks hott...ill post pics in a lil while

 

Please do post pics. I plan on doing this as well.

 

will someone post instructions on how to make the grill pieces?

 

I have done this many times, and its not that hard . It takes a little trial and error but its worth it. There is a link to instructions but idk it so ill give u the rundown on it. First get some tinsnips, some carboard or posterboard, a marker and some zipties or jb quik weld if you want the grill glued to your car.( not my preference). Cut out a template of whicever hole your going to be doing. lay it on top of the mesh( which by the way is gutter guard sold at home improvement stores for about $1.50) now trace the template on to the grill and leave about a quarter of an inch all around . Then cut. Place against the stock grill and kinda size up what you have to work with. You want to bend back the edge of the mesh, just about 1/4 inch and put in place then if it fits drill appropriate holes for zip ties , dont worry on mine you cant see holes or ties. Zip tie to grill or hole and stand back in awe. once you start you will see what you have to do, like i said its a little trial and error. Good luck.

 

www.vqpower.com has instructions I think. Im going to do this as well.

 

That site is temporarily down. It really is easy tho.

 

I wanted to use the black plastic mesh they sell for use as gutter guards. Your method sounds good...I'll try and adjust for this stuff. Just want to clarify, you drilled small holes on your bumper cover to fit zipties into?

 

pics pics pics!!!! if someone hav pic upload!!!! i want to do that too!!

 

i did not do fog holes i did my stock 95 grill and the holes below it. On the grill i drilled between the top of the grill itself and the bottom of the plastic piece it is attached to.On the middle cut out of the bumper the mesh is held by the license plate holder and the lower cutout is discreetly zip-tied. Sorry for any confusion

 

any pics of this work?

 

sorry i have no digital camera.

 

mmmm dud!!!!

 

well dudes...i finished this work..!!! man the GXE looks cool!! i forgot to say that my car has the SE rims...so it look very sport with the mesh on the foglight plastic

 

I've been wanting to do this to my GXE, but I've never seen it ever, so I'm kinda itching for pics POST THEM!

 

 

i have them!!!(pics) but i dont know how to upload it!!! let me know pls

 

 

Click here for my instructions on how to install. YMMV.

 

Thats what i was waiting for ;-) thanx maximaah

 

Is there anyway i could get my grill on my 97 max to look like that one?