4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

Write-up for all red tails??

Thread Tools
 
Search this Thread
 
Old Feb 18, 2004 | 06:40 PM
  #1  
myke321's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2003
Posts: 737
Write-up for all red tails??

Any one where a write up for all red tail is, or how some of you guys did yours. I'm gonna do mine. i decided to do it after is saw this:


I think it looks sweet on this Audi. So a link would be helpful. Thanx!
Old Feb 18, 2004 | 06:46 PM
  #2  
mzmtg's Avatar
Minister of Silly Walks
iTrader: (11)
 
Joined: Oct 2000
Posts: 13,772
Read the FAQ?
Old Feb 18, 2004 | 06:47 PM
  #3  
myke321's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2003
Posts: 737
Yes, thier was nothing.
Old Feb 18, 2004 | 06:50 PM
  #4  
myke321's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2003
Posts: 737
I'm looking to do the Testor spray paint method,i just need some guidence.
Old Feb 18, 2004 | 06:53 PM
  #5  
DAVE Sz's Avatar
Hooooooonda.....
iTrader: (2)
 
Joined: Jan 2004
Posts: 8,082
From: Chiiiii
Here's some, buy the paint, tape off the lights or remove them. Now this is very important and I can't stress this enough, shake the can and spray away.
Old Feb 18, 2004 | 06:57 PM
  #6  
myke321's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2003
Posts: 737
I'm looking for details A$$, i.e., how many coats, do i use a clear coat? Is it easy to take off if i mess up.
Old Feb 18, 2004 | 07:12 PM
  #7  
DAVE Sz's Avatar
Hooooooonda.....
iTrader: (2)
 
Joined: Jan 2004
Posts: 8,082
From: Chiiiii
Well, A$$, this has been posted so many times in the last couple weeks that I thought that maybe you wouldn't be such a damn lazy a-hole and go back a few pages and look. Don't bother asking if you don't want to get flamed. Put on as many coats as you need. Put on clear coat but only if you don't want the paint to peel and chip. Does that help?
Old Feb 18, 2004 | 07:14 PM
  #8  
myke321's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2003
Posts: 737
Ha!! man you make me fuken laugh tough guy! Have you done this MOD? or are you just talking out your A$$?
Old Feb 18, 2004 | 08:47 PM
  #9  
SPiG's Avatar
SomePsychoGuy
iTrader: (7)
 
Joined: Sep 2003
Posts: 1,943
From: Baton Rouge, LA
Children behave.....

There is the paint method or there is the vinyl method. I am not sure which is better. I plan on doing this soon as well.
http://www.vqpower.com/v2/modules.ph...howpage&pid=41
Old Feb 18, 2004 | 08:48 PM
  #10  
DAVE Sz's Avatar
Hooooooonda.....
iTrader: (2)
 
Joined: Jan 2004
Posts: 8,082
From: Chiiiii
I did it. Read the other threads where I told people what to do and what not to do. Trying to help them and warn them not to make the mistakes I did. I'm not trying to sound tough. You're the 17 year old who wants to start fighting over the internet. Hope you don't get suspended for the profanity.
Old Feb 18, 2004 | 08:52 PM
  #11  
mansurxk's Avatar
Supporting Maxima.org Member
iTrader: (14)
 
Joined: Sep 2003
Posts: 1,712
From: New Jersey
i think Big D has posted on this subject like 8 or 9 times within the past month, i think a few days ago as well, something about the paint turning green or something and yeah its a few pages back.
Old Feb 18, 2004 | 08:58 PM
  #12  
DAVE Sz's Avatar
Hooooooonda.....
iTrader: (2)
 
Joined: Jan 2004
Posts: 8,082
From: Chiiiii
The turning green thing was because I used TESTORS tint to darken ALL my lights. Within a few days the tint turned green/blue and I had to clear all the lights. There are others that also said this on the org.
Old Feb 18, 2004 | 09:17 PM
  #13  
myke321's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2003
Posts: 737
Originally Posted by Big D
I did it. Read the other threads where I told people what to do and what not to do. Trying to help them and warn them not to make the mistakes I did. I'm not trying to sound tough. You're the 17 year old who wants to start fighting over the internet. Hope you don't get suspended for the profanity.
I did read a few threds back and saw nothing,Thanks for being concered, i was just asking for some help painting my tails. Thanx to 99Maxima5sp for your input.
Old Feb 18, 2004 | 09:19 PM
  #14  
99Maxima5sp's Avatar
Donating Maxima.org Member
 
Joined: Dec 2002
Posts: 2,748
Ive done all-reds on my 99. Was pretty simple and straight forward

1) Remove lights
2) Clean them with a good cleaner (i used orange blast)
3) Spray away, i used about 5-6 coats, enough to make sure the lens was covered and red, not pink
4) It dries very quickly, but just give it about 40mins to fully cure
5) Re-install and enjoy the results..


btw, i used no clear-coat. They already have a nice shine, and i will wet sand mine shortly to really shine them up..


Heres a pic, dontmind the awful quality (digi messed up) or my bent duals, a lil accident...getting that fixed soon...







Eric
Old Feb 19, 2004 | 12:21 PM
  #15  
Ladzio's Avatar
Donating Maxima.org Member
iTrader: (8)
 
Joined: Jul 2003
Posts: 1,978
Have a question! After I put paint on tails, is it safe to put tails in oven to open them up, will paint be danaged?? (the project I do requires the paint to be already on tails before opening them up)
Thanks!
Old Feb 19, 2004 | 12:39 PM
  #16  
ABK's Avatar
ABK
Senior Member
 
Joined: Nov 2003
Posts: 1,208
Check out my website, I did it. You need to put around 3-4 coats for red on it, and then clear coat it. I don't remember the paint codes but they are all over the place. Make sure you take out the taillights because you will end up with paint on your car, I wouldn't risk it. I might do a little write up, but it depends if I can paint over the clear coat? Can anybody answer this? One of my lights is little bit lighter then otherone.
Old Feb 19, 2004 | 12:50 PM
  #17  
Ladzio's Avatar
Donating Maxima.org Member
iTrader: (8)
 
Joined: Jul 2003
Posts: 1,978
Thanks man! Looks sweet, so I need to clear coat it too, did you get your paint from paintscratch.com ot it can be picked up at Autozone or Walmart?
Old Feb 19, 2004 | 01:02 PM
  #18  
myke321's Avatar
Thread Starter
Senior Member
 
Joined: Aug 2003
Posts: 737
Would the colors match a little better if the whole tail was sprayed, not just the orange? saw a pict posted up a Black max with all red tail and it look prefect. I'm woudering if thats what he did.
Old Feb 19, 2004 | 04:27 PM
  #19  
RA030726's Avatar
I'm nutty for Nissans
iTrader: (46)
 
Joined: Feb 2003
Posts: 9,311
I sprayed all of the outside and half of the inner tails... looked great the day I did it, but its starting to fade. (testors)



On a good note I know how to remove the paint, Oops! remover takes it off and doesnt harm the lens.
Old Feb 19, 2004 | 05:28 PM
  #20  
Ladzio's Avatar
Donating Maxima.org Member
iTrader: (8)
 
Joined: Jul 2003
Posts: 1,978
But if you clear coat it, will it still fade???
Old Feb 19, 2004 | 10:08 PM
  #21  
DAVE Sz's Avatar
Hooooooonda.....
iTrader: (2)
 
Joined: Jan 2004
Posts: 8,082
From: Chiiiii
Originally Posted by ABK
Check out my website, I did it. You need to put around 3-4 coats for red on it, and then clear coat it. I don't remember the paint codes but they are all over the place. Make sure you take out the taillights because you will end up with paint on your car, I wouldn't risk it. I might do a little write up, but it depends if I can paint over the clear coat? Can anybody answer this? One of my lights is little bit lighter then otherone.
That's why you mask off the lights. You'd have to be stupid to do it without something over the car.
Old Feb 19, 2004 | 10:11 PM
  #22  
ABK's Avatar
ABK
Senior Member
 
Joined: Nov 2003
Posts: 1,208
yeah but if you get one open spot you even far away you are fu{ked. I'm just rather take them off to be safe then sorry. So can you paint over clear coat?

And yes guys if you don't want them to fade clear coat is a must. Mine where on for a while at least month and a half, no fading at all.
Old Feb 19, 2004 | 10:22 PM
  #23  
nadir_s's Avatar
vicodin ... gift of life
 
Joined: Apr 2002
Posts: 5,399
From: norcal
directions to either paint or use vinyl is in the FAQs. find it!

If you can get your hands on translucent vinyl, then you are set. I have yet to see paint that looks just as good as vinyl.

obvserve! (as clear as i could get it... with the sun shining directly on it!)


the same plastic glossy texture is preserved:


i left some tape wrapped around so I can easily just grab one end and peal off w/ heatgun/blowdryer and some goo-gone.


if you use a heatgun, you can get all the bubbles out:
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Fbana41
Maximas for Sale / Wanted
3
Aug 29, 2016 12:18 PM
BobTX10
8th Generation Maxima (2016-)
14
Oct 7, 2015 08:43 AM
bigfrank
4th Generation Maxima (1995-1999)
2
Oct 1, 2015 12:51 PM
HerpDerp1919
3rd Generation Maxima (1989-1994)
2
Sep 29, 2015 02:02 PM




All times are GMT -7. The time now is 07:01 AM.