Searched and came up with a fatal error (to many files found)

Does anyone have a write up on replacing the tailights (whether it be altezzas etc.) I am wanting to put my 96 red/clears on.

Also, does anyone have a write up on replacing the ECU, my technosquare should be here soon.

If not I can do it, I always like to have some personal feedback from those who have done it though.


Thanks, any info is appreciated.

 

for tailights:

1. unclipping all the harness, use a flat screwdriver to help you if necessary
2. there are four 8mm screws holding on each part of the tailight. start from the outter left side of the tailight and work your way to the right.
3. unscrew those four 8mm hex screws with a wrench
4. now pull really hard. there are some weird black rubber thingy, but it's okie. you'll have to pull your way through.
5. do the same for remaining tailight.