GD: Rear trunk hole Camera $60 shipped.
GD: Rear trunk hole Camera $60 shipped.
This Group deal is for a rear camera. The cams are $60 shipped!
we need 20 people. No less no more. We can only do this in incriemnts of 20, so if 21 people want it, the 21st person is out of luck unless 19 more people sign up and we get another 20 people. Please sign up only if you are sure, and know you wil have the money to send when the 20 people goal has been reached. thank you.
I went out and measured the trunk holes on my 97 and a 2001 and they are 1 and 1/16 inch or 24mm the same size as the camera. they should fit. I am thinking they will and am going to risk it. If they are way to big in which i stronly doubt i will dremal out a tad.
One person has put one into their trunk with out moddification to the trunk hole.
OK i talked it over with a company and they will give me 20 of them for $60 apeice. So $60 for a camera. as said above they should fit in the trunk hole. If not you could always put it into your rear bumper.
Description:
Offered here is a NEW EXCELLENT PROFESSIONAL QUALITY Brand New COLOR Inside-Mount Wide View Angle Reverse Rear View Camera; the lens has focal length of 2.8mm with 105 degree viewing angle. Comes with reverse camera viewing system.
The video camera comes with 3 movable rings. The first and second movable ring (black color) on the left are the angle controller rings. The third is the fixing ring.
Specification:
Number of Pixels NTSC - 512 (H) * 492(V)
Sync System - Internal
Image Sensor / Resolution - more than 380 TV lines
Minimum Illumination - 3 LUX / F1.2
S/N Ratio - More than 48dB
Power Source - DC 12V/110mA (Tolerance: +/- 10%)
Lens - 2.8 mm / F2.0
View Angle - 105° (105 degree)
Size - (Dia) 24mm, (H) 35mm
view - mirror image view for car reverse backup system
Waterproof - Yes
Operating Temperature - 14°F - 115°F (-10°C to 46°C) / RH 95% Max
Storage Temperature - -22°F - 140°F (-30°C to 60°C) / RH 95% Max
TV System - NTSC
Casing - Hard Metal
This is thanks to Maximapolak:
note: This is the 53 degree camera, this is the deal for the 105 which will be about twice as wide of view as is in the pictures.
we need 20 people. No less no more. We can only do this in incriemnts of 20, so if 21 people want it, the 21st person is out of luck unless 19 more people sign up and we get another 20 people. Please sign up only if you are sure, and know you wil have the money to send when the 20 people goal has been reached. thank you.
I went out and measured the trunk holes on my 97 and a 2001 and they are 1 and 1/16 inch or 24mm the same size as the camera. they should fit. I am thinking they will and am going to risk it. If they are way to big in which i stronly doubt i will dremal out a tad.
One person has put one into their trunk with out moddification to the trunk hole.
OK i talked it over with a company and they will give me 20 of them for $60 apeice. So $60 for a camera. as said above they should fit in the trunk hole. If not you could always put it into your rear bumper.
Description:
Offered here is a NEW EXCELLENT PROFESSIONAL QUALITY Brand New COLOR Inside-Mount Wide View Angle Reverse Rear View Camera; the lens has focal length of 2.8mm with 105 degree viewing angle. Comes with reverse camera viewing system.
The video camera comes with 3 movable rings. The first and second movable ring (black color) on the left are the angle controller rings. The third is the fixing ring.
Specification:
Number of Pixels NTSC - 512 (H) * 492(V)
Sync System - Internal
Image Sensor / Resolution - more than 380 TV lines
Minimum Illumination - 3 LUX / F1.2
S/N Ratio - More than 48dB
Power Source - DC 12V/110mA (Tolerance: +/- 10%)
Lens - 2.8 mm / F2.0
View Angle - 105° (105 degree)
Size - (Dia) 24mm, (H) 35mm
view - mirror image view for car reverse backup system
Waterproof - Yes
Operating Temperature - 14°F - 115°F (-10°C to 46°C) / RH 95% Max
Storage Temperature - -22°F - 140°F (-30°C to 60°C) / RH 95% Max
TV System - NTSC
Casing - Hard Metal
This is thanks to Maximapolak:
note: This is the 53 degree camera, this is the deal for the 105 which will be about twice as wide of view as is in the pictures.
1. Manualmaxima
2. Maxima99sebose
3. Maxtank
4. glass88jaw
5. blk2kmaxse
6. 2kayznmaxima
7. SE95MaxSkyline (in for either one)
8. LatinMax (I would like the 105 one but will take the other)
2. Maxima99sebose
3. Maxtank
4. glass88jaw
5. blk2kmaxse
6. 2kayznmaxima
7. SE95MaxSkyline (in for either one)
8. LatinMax (I would like the 105 one but will take the other)
1. Manualmaxima
2. Maxima99sebose
3. Maxtank
4. glass88jaw
5. blk2kmaxse
6. 2kayznmaxima
7. SE95MaxSkyline (in for either one)
8. LatinMax (I would like the 105 one but will take the other)
9. SpeedyMax99
Everyone will send the money to me once we get 20 people. Then i will send all the money to the lady selling them, and they will be shipped here, and then i will ship them out to each person.
when the money is sent it will take alittle while for everythign to go into my account, and then it might take a day or two to transfer form me to the seller of these camera. Then it will take alittle while to receive them, and once i get them, i will ship them all out within 24 hours of when i receive them. I will keep everyone posted up on the info that is going on, to make sure each of you know what is going on with your camera.
http://forums.maxima.org/showthread.php?t=343295 that is my selling log for some of the business i have doen so far. Thank you
2. Maxima99sebose
3. Maxtank
4. glass88jaw
5. blk2kmaxse
6. 2kayznmaxima
7. SE95MaxSkyline (in for either one)
8. LatinMax (I would like the 105 one but will take the other)
9. SpeedyMax99
Everyone will send the money to me once we get 20 people. Then i will send all the money to the lady selling them, and they will be shipped here, and then i will ship them out to each person.
when the money is sent it will take alittle while for everythign to go into my account, and then it might take a day or two to transfer form me to the seller of these camera. Then it will take alittle while to receive them, and once i get them, i will ship them all out within 24 hours of when i receive them. I will keep everyone posted up on the info that is going on, to make sure each of you know what is going on with your camera.
http://forums.maxima.org/showthread.php?t=343295 that is my selling log for some of the business i have doen so far. Thank you
ok....when you take out the lock....you see a hole with some tabs. Those need to be dremmeled down so the camera can fit the hole (make sure not to scratch the paint
)
then slide the camera through the hole and run the wires.....mine are all pretty much hidden.
I ran the power to the rear cigarrete lighter.
it's nice to see the rear of you especially when you can see who you've beat....
)then slide the camera through the hole and run the wires.....mine are all pretty much hidden.
I ran the power to the rear cigarrete lighter.
it's nice to see the rear of you especially when you can see who you've beat....
well what i am thinking. is putting a switch to power the cam on and off. the microvision redmax screen has only one input vido rca. Well buy a 1 to 2 adapotor at wal-mart or anywhere for $3. you hook this up to the input rca and now you have 2. hook the cam up to one, and your dvd to another.
Turn the cd info display off of your pioneer headunit, so where it will not give a video signal out to the screen and flip your cam on. I think it woul dbe easy piecey yap and easy.
Turn the cd info display off of your pioneer headunit, so where it will not give a video signal out to the screen and flip your cam on. I think it woul dbe easy piecey yap and easy.
Originally Posted by ManualMaxima
well what i am thinking. is putting a switch to power the cam on and off. the microvision redmax screen has only one input vido rca. Well buy a 1 to 2 adapotor at wal-mart or anywhere for $3. you hook this up to the input rca and now you have 2. hook the cam up to one, and your dvd to another.
Turn the cd info display off of your pioneer headunit, so where it will not give a video signal out to the screen and flip your cam on. I think it woul dbe easy piecey yap and easy.
Turn the cd info display off of your pioneer headunit, so where it will not give a video signal out to the screen and flip your cam on. I think it woul dbe easy piecey yap and easy.

drew
Originally Posted by GodsmackMAX
Screw putting in a switch, just wire up a relay for it to come on whenever you throw her in reverse. 
drew

drew
how does everyone expect to pay?
Paypal, or other?
1. Manualmaxima
2. Maxima99sebose
3. Maxtank
4. glass88jaw
5. blk2kmaxse
6. 2kayznmaxima
7. SE95MaxSkyline (in for either one)
8. LatinMax (I would like the 105 one but will take the other)
9.tkarrah
10. tkarrah
ok we have 10 we need 10 more...is everyone that is listed still in for it?????
2. Maxima99sebose
3. Maxtank
4. glass88jaw
5. blk2kmaxse
6. 2kayznmaxima
7. SE95MaxSkyline (in for either one)
8. LatinMax (I would like the 105 one but will take the other)
9.tkarrah
10. tkarrah
ok we have 10 we need 10 more...is everyone that is listed still in for it?????
1. Manualmaxima
2. Maxima99sebose
3. Maxtank
4. glass88jaw
5. blk2kmaxse
6. 2kayznmaxima
7. SE95MaxSkyline (in for either one)
8. LatinMax (I would like the 105 one but will take the other)
9.tkarrah
10. tkarrah
11. Ammi
is that your name? I watch this french video in class and their is a person named ammi in it
2. Maxima99sebose
3. Maxtank
4. glass88jaw
5. blk2kmaxse
6. 2kayznmaxima
7. SE95MaxSkyline (in for either one)
8. LatinMax (I would like the 105 one but will take the other)
9.tkarrah
10. tkarrah
11. Ammi
is that your name? I watch this french video in class and their is a person named ammi in it
Originally Posted by akaxmrxhammer
can i hook this camera up to my stock nav system?
Originally Posted by Max Mutes
Same here. Put me down for one, but see what's the deal with Night time. Also, can we get a full written write-up if this deal goes through?
True, but problem here is I already use a Female Adapter Kit because my TV and DVD/CD Player are both males. with the addition of this and a Ps2 I'm going to need some kind of 4-way mechanism.
Originally Posted by nadir_s
i don't quite follow you but you can easily fix it with Y-adapters or couplers.
I want it so i can put it down, flip it, and reverse it.
Originally Posted by ManualMaxima
yea.....no one acually needs this, but you also do nto need wheels, bodyk kit, clears, or anythign really, but it is cool to have.



