Please do not clutter this thread with discussion. Use it for posting related technical data only.


VQ30;
Rod Length (center dist): 147.65
Rod Stroke Ratio: 2.014 (73.3mm stroke)
Pin dia. w/bushing: 22.0
Rod big end dia. : 48.0

VQ35;
Rod Length (center dist): 144.2
Rod Stroke Ratio: 1.771 (81.4mm stroke)
Pin dia. w/bushing: 22.0
Rod big end dia. : 55.0

VQ40;
Rod Length (center dist): 166.87
Rod Stroke Ratio: 1.813 (92mm stroke)
Pin dia. w/bushing: 22.0
Rod big end dia. : 57.0

VG30/VG33/VE30;
Rod Length (center dist): 154.15
Rod Stroke Ratio: 1.857 (83mm stroke)
Pin dia. w/bushing: 20.994
Rod big end dia. : 53.0

KA24;
Rod Length (center dist): 165.0
Rod Stroke Ratio: 1.719 (96mm stroke)
Pin dia. w/bushing: 21.0
Rod big end dia. : 53.0

QR25;
Rod Length (center dist): 143.0
Rod Stroke Ratio: 1.43 (100mm stroke) <~~ Horrible
Pin dia. w/bushing: 20.0
Rod big end dia. : 48.0

VH45/VK45;
Rod Length (center dist): 147.0
Rod Stroke Ratio: 1.778 (82.7mm stroke)
Pin dia. w/bushing: 22.0
Rod big end dia. : 55.0

VH41;
Rod Length (center dist): 147.0
Rod Stroke Ratio: 1.934 (76mm stroke)
Pin dia. w/bushing: 22.0
Rod big end dia. : 55.0

VK56;
Rod Length (center dist): 154.5
Rod Stroke Ratio: 1.679 (92mm stroke)
Pin dia. w/bushing: 22.0
Rod big end dia. : 57.0

SR20;
Rod Length (center dist): 136.3
Rod Stroke Ratio: 1.585 (86mm stroke)
Pin dia. w/bushing: 22.0
Rod big end dia. : 51.0


GA16/QG18:
Rod Length (center dist): 140.5
Rod Stroke Ratio: 1.597 (88mm stroke)
Pin dia. w/bushing: 19.0
Rod big end dia. : 43.0

 

could you include ca18 info as well?
please delete this post as soon as the info is posted

 

Good info. What if you used VK45 rods in a VQ30????? Any stronger??? change comp????

 

Could we sticky this?