i have an 01 AE and want to program the garage door buttons on my visor and i dont have my manual. what is the process to do this?

 

If you have one of those rolling code garage doors, it can't be done.

 

dont know what a rolling code opener is. how would i know what i have, and do you know how to do it if its not rolling code?

 

How old / what brand is your garage door opener?

 

you hold the two outside buttons till they blink or something to reset them, then you hold the button you want to program while holding your garage door opener button and pointing at it until the light blinks...i think thats how its done, someone with a better memory correct me if im wrong

 

its in the owners manual

 

He just said he doesn't have one...

 

then download one

http://www.nissan-techinfo.com/nissa...p?dept%5Fid=37

 

nicely said...i thot you got for a second for once...but of course you always gotta come up w/ a good explanation for everything

 

i dont get owned

 

hence the reason i said "for once"

 

now you are tryinng to own me!!

 

intended of course...ahem

 

read the manual! it's in there

 

sorry man but thats wrong. i have a rolling code opener. you have to press "program" on the motor itself then press the button on your visor.

 

true dat...same here.

 

Tried that w/ mine before and it still doesn't work

 

Press and hold for a few seconds (can't remember exactly how long) the two outer buttons on the visor to clear all programs and then follow the directions. It may take a few tries, but it can be done.

 

I have the rolling code feature also and it works with my homelink programmer.

reference sections 2-34 and 2-35 in the owners manual

if your homelink button has someone on it already, the reprogramming for rolling code feature is slightly different

 

really?

If you have a rolling code garage door opener, it can done! I have a rolling code opener and it worked for me.

 

i have it programmed. it opens from 280 feet away

 

those directions are a lot better. You need to program the remote to the car first and then the garage door opener to the car.

in the manual its a little confusing cause most people just skip to the "learning feature" part

 

yay thanks! i have a rolling code and i have a similar card to the one maximadave posted but it left out the rolling code part and I never read up on how to program it.

We just had the automatic garage door opener installed maybe 6 weeks ago though..

but thanks again

 

I'd love to use my visor button but when I program my door and push the button... BOTH doors go up or down... or one goes up and the other goes down... you get the picture. Anyone have any ideas for someone who has two of the same openers???

 

I wonder if you can activate 'pilot-controlled' runway lights or what else...
o this is very exciting

Some public use airports have runway lights that are pilot activated by transmitting 'clicks' 3,5, or 7 times over the appropriate frequency.

1) handheld reciever on the appropriate freq.
2) stand near the reciever for the automatic lights
3) program the homelink

IM GOING TO TRY THIS!!!

 

How are you managing it now? It's the same principle either using your visor xmitter or the handheld??

 

Nice directions. I'm gonna try to do this when I get home...

I had a familiar thread but not too much luck... this thread is way better!

 

I'm having the same problem.

 

im trying to program this, my apt building was built in the late 80s and in canada, i understand the directions are a little different for canada, but i tried a few things didnt seem to work. any ideas if anyone has done the setup for an apt building.

 

i had the same problem. i couldnt program the homelink because of the rolling code. Then i found that Nissan programming guide on Cardomain , the same one on here by Maximadave. Went home, tried it, and it works. Walla, mint. I have tried so many times but i finally got it done

 

i just got this to work and i have a rolling garage door. I love this forum.

 

Hey, have you fixed it yet?

 

i just fixed mine, the learn button solved everything. these directions were much more clear than i have previously read.

 

Old thread much?

 

great info i programmed all 3 doors at my house in about 10 min.works great,thanks for the info

 

just reprogram the side that you dont want the max to open! Hit the learn button and then use the standard remote for that unit. Dont use the max homelink til you have completed the the standard side.

 

one time while programming my garage door, I finished and i was able to open 3 other garage doors in my neighborhood. Apparently, they all used their garages in the few esconds that i was prssing the button and all have the same one...it was pretty cool.

 

Awesome...I'll get right on that.

 

add this to your favorite if you like it.