Hello, I just purchased an Air Intake the short Ram and it didn't come with any instructions. I wanted to try it myself before taking it to some one else, but I don't want to mess anything up. So if anybody has instructions or know where I can get intructions to install an Short Ram Air Intake I would greatly appreciate it.

Thanks - TMaxx

 

Air intake is very easy, first off your going to need clamps(round holders with screws that turn to tightn) if they came with it or go to an auto store to pick up. Then just pop the hood, open your intake where the filter is, take out the old system which will be held in with screws. Your going to need to reuse the sensor part, it will fit into your new system( reason for having all the clamps). Its pretty straight forwards, hope i helped a bit not the greatest write up.

 

Thanks for the reply. I was more concern with the hoses and making sure I reconnect all the wires etc... to the right places.

 

make sure to get rid of the 'ram' part that connects to the front right up by the grill. that'll treally clean out your engine bay. disconnect everything up to the TB and then it should all go together from there. Make sure to connect the MAF in there too. It's a pretty easy job. try AEM or INJEN and tyou can probably find some type of universal installation instructions. ENJOY!

 

look up in the stickies.