yesterday my "brake" light started to turn on.. and blink, and on and off again, with every light touch to the ebrake, the light blinked.. you need to hold the brake down w/ some force for the light to stay off... but it blinks with every drive i make. Brake fluid level is at max, and i don't know if there is anything i can do to fix this easlily and quickly.

any ideas?

 

It could be the contact switch for the ebrake, i don't know what else it can be good luck

 

it went away, and today again.. lit up!

any idea?

 

Your brake fluid is low. The light has two duties: e-brake and low fluid.

 

Yea fill the fluid up, I had the same problem over the winter and just added some fuild and never had problems since.

 

checked level.. brake fluid at max!

 

Since I'm fairly certain that a Cel code would be thrown in place of a rotor problem, the light should only come on in the case of a bad e-brake sensor or if the e-brake is engaged (knock on wood). But since you can tell if you're e-brake is up or not I wouldn't worry about it. Just remember to check the brake fluid level every now and then. And check other fluids while you're at it.