Sorry for the long delay fellas. I originally supplied this kit with the brackets and centering rings for the rotor. The rings centered the rotor if you didn't have the Cobra rotor redrilled to the Nissan stud size. I couldn't find a place to make the rings anymore so I'm deleting them from the kit.

Good news = makes the kit price cheaper. Brackets are $60 shipped via usps priority (48 states and sometimes canada)

Bad News = You have to use Cobra rotors that are redrilled. FORTUNATELY Automax offers the rotors redrilled. (also slotted, Xdrilled or dimpled). He also sells the SS lines and pads.
http://forums.maxima.org/showthread.php?t=281773

If you need some great instructions on how to install these parts, look here.
http://forums.maxima.org/showthread.php?t=351406
The post is for the Q45/J30 calipers but the instructions are the same. Take note to the hardware specifications (nuts/bolts). I would also add that you need to make sure the nuts/bolts are the same strength grade or better than the oem units you have now.

For those of you that have 2000+ year maximas, you can still use these brackets. BUT you have to enlarge one set of bracket holes to the next size to fit your larger oem brake bolts.


Brackets are $60 / set. Price includes shipping and paypal fees. Paypal is "Jeff_Iwata@yahoo.com". Tell me who you are, what you are buying and where to send it.

I got 20 sets done and I'm informing all PM people 1st. But I'm going to put this exact same message in the for sale sections also. I got more than 20 PMs regarding these so these might sell out again.

I hope I answered all your questions.

Jeff92se

 

Is ABS effected by the BBK?

 

Not that anyone as reported no

 

These parts also can be used with the 2 piston Q45/J30 calipers for more wheel clearance

 

Brackets are on sale again! I've updated the 1st post for info. It's brackets only now. $60 shipped for the set. Must use Cobra rotors that are redrilled to the Nissan stud size now.

I got 20 sets but I've got more than 20 people that have inquired about them. I've informed the PM'd people 1st. But it's 1st pay, first out.

 

Already received a few payments. Again, I've received more inquiries than parts I've ordered. So ordering now will prevent you from having to wait until the next batch is made!

 

4 more sets sold!

 

Still have some sets left. Buy them before I run out again

 

I have 6-7 sets left! They are flying off the shelf. Get them while they are in stock.

 

Just sold 2 more sets. Stock is getting low so if you need a set, I'd order now

 

Get ready for summer w/o the wait. I have a few sets left.

 

Got a few inquiries so if you need some w/o the wait, let me know asap

 

I just sold another set. I just checked and have THREE sets left before I have to get more made. Avoid the wait and order now.

$60 shipped. Just the brackes are for sale now. "Jeff_Iwata@yahoo.com" is the paypal.

 

I spoke to my machine shop and they are done. I just have to find time to grab and pay for them. So I'll start accecpting paypal payments now.

"Jeff_Iwata@yahoo.com" $60 shipped is the price.

Let me know, who you are what you are buying and where to send them.

Thanks

Jeff

 

Just shipped 4 sets out of the 10 I just got made. Get them while I got them.

 

Who wants the last set out of this batch? After a batch is done, I usually wait until 3-4 more guys are interested before running another. So order now and avoid the wait.

 

I now have stock. "Jeff_Iwata@yahoo.com" is the paypal. $60 shipped to anywhere in the USA.

Thanks

Jeff

 

hey in your first post you say these will work on a all 2000 and up Maximas, including 2004?

 

Should be good to go except for the 6th gen maxima. Although the 2000+ has to drill one set of holes a tad larger.

 

how much of a difference between the 5th gens and 6th gens in that area where the bracket goes?

 

enough to me not to mention this fitting the 6-gens. Might as well not even consider it.

 

Have been sending these out so I have about 1/2 of the batch left. About 5-6 sets. So get them now vs waiting for the next one to get made.

 

Have a few left. $60 shipped. I'd get them now vs having to wait for the next batch

 

pm sent

 

2 more sets shipped. 2 sets left from this batch until I have to make another interest thread. That usually means having to wait until I get 5 serious buyers before placing another batch order.

 

I'm interested in a set of brackets.

I have a few questions though:

Will the new batch come with the rings?

Will u consider having the rear kit made for the 300zx calipers?
I know Matt doesnt make them anymore.

 

I no longer offer the rings.

There's a very good reason why there are no kits for the rear of the 4 gen+ maxima. They are very expensive and difficult to make. I never offered this for the 4-gen+ maxima. I used to offer brackets for the rear 3-GEN. But not the 4-gen and no they aren't compatible.

I have ONE set of brackets available.

 

I've tryed to pm u but your box is full I'll like to buy a set for a 2k max also can I use 350z 13" rotors?

 

No you can't use the 350z rotors. cobra rotors only. I know I replied but others might want to know.

FyI hove bought my last set.

I'll need 3-4 confirmed interest before entering an order for another batch so let me know

 

Well I have a turbo 2k I'm rebuilding, so I'm in for another set.......

PM me your paypal when it's available.

Thanks
James

 

Since I had 2-3 interested parties, I'll go ahead and order 10 more sets.

 

hi i would like to buy a set.... i have the 300z set up... will the brackets fit....can u please give me a call asap my # is 1347-425-5932... thANKS RAY

 

On your 95 max, yes. With teh 30 mm 300z calipers? yes. Must use the 13" cobra rotors from AUTOMAX here in the group deal forums.

 

Shop said they are ready so start PMing me again to get in line.

 

I have them! Paypal $60 to "Jeff_Iwata@yahoo.com"

Thanks for the wait

Jeff92se

 

Have these in stock now so they are available for shipping asap.

 

i have the 300xz bbk. its made by brembo.. i need the brackets for it to fit my 95 maxima.. will ur brackets work..

 

Nope.

 

Still have them. Get them while they are in stock

 

Still have them. Ready to ship from stock. No waiting