6th Generation Maxima (2004-2008) Discussion of the 6th generation Maxima. Come see what others are saying.

Emailed Guys at Hotshot about Headers...

Thread Tools
 
Search this Thread
 
Old Oct 3, 2005 | 07:50 PM
  #1  
Glude's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Feb 2003
Posts: 2,780
Emailed Guys at Hotshot about Headers...

Here is the reply I got

Me: I just want to know if you guys have anything planned
for the 6th gen maxima? I know you just released the
altima seR headers and I think they might fit. Could
you give me any feedback? Thanks


John: DO you have a 6th Gen.? If so, where are you located? There is only one minor modification required, but I want to test fit a set before we release
them to the public.

Thanks

John
Hotshot

Well, looks like we are in luck. I know one of you guys on the .org is probably somewhat close to them. I knew that the 02-03 altima exhaust design changed slightly and I assumed it was the same with the ser altima and our cars. These new headers have a built in cat unlike the 02-03 headers for the altima. The 02-03 headers have given 20+ hp gains on a lot of the fwd VQ35s with some tuning and im sure the new design will be very similar in numbers. Post some info here and we can probably get something going. Later

Link to the 04-05 headers for the Altima http://hotshotperformance.com/hotsho...rs/ns3018.html

Glude
Old Oct 3, 2005 | 08:03 PM
  #2  
Tek-Niq's Avatar
my rear view mirrors flap like a f-ing bird
iTrader: (3)
 
Joined: Aug 2004
Posts: 5,268
where are they located?
Old Oct 3, 2005 | 08:09 PM
  #3  
Mystery's Avatar
Senior Member
 
Joined: May 2003
Posts: 1,087
Sweet. Good looking out Glude.
Old Oct 3, 2005 | 08:18 PM
  #4  
Glude's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Feb 2003
Posts: 2,780
I actually dont know. Go to the website and you will find all the info you need.
Old Oct 3, 2005 | 09:01 PM
  #5  
SEmy2K2go's Avatar
Go BUCKS!!!
iTrader: (10)
 
Joined: Aug 2003
Posts: 9,557
From: Delaware, OH-IO
Hotshot Performance
2643 Rosemead Blvd.
So. El Monte, CA 91733
Old Oct 3, 2005 | 09:09 PM
  #6  
Tek-Niq's Avatar
my rear view mirrors flap like a f-ing bird
iTrader: (3)
 
Joined: Aug 2004
Posts: 5,268
I know we have people over there, so who's the pig?
Old Oct 3, 2005 | 09:11 PM
  #7  
Majestic_MAx05's Avatar
Senior Member
iTrader: (2)
 
Joined: Aug 2005
Posts: 980
Hey I live like 20min from there
Old Oct 3, 2005 | 09:13 PM
  #8  
Glude's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Feb 2003
Posts: 2,780
Thanks for throwin' the address up.
Old Oct 3, 2005 | 09:14 PM
  #9  
Tek-Niq's Avatar
my rear view mirrors flap like a f-ing bird
iTrader: (3)
 
Joined: Aug 2004
Posts: 5,268
Originally Posted by Majestic_MAx05
Hey I live like 20min from there
SOLD!!!!!.............. go check it out and get fitted... all they need is to find out is how the differ from the alti to ours..
Old Oct 3, 2005 | 09:15 PM
  #10  
Majestic_MAx05's Avatar
Senior Member
iTrader: (2)
 
Joined: Aug 2005
Posts: 980
Ill try to hit them up during the week. Is John the Person to get in touch with?
Old Oct 3, 2005 | 09:17 PM
  #11  
Tek-Niq's Avatar
my rear view mirrors flap like a f-ing bird
iTrader: (3)
 
Joined: Aug 2004
Posts: 5,268
might as well, he's the one that answered the e-mail
Old Oct 3, 2005 | 09:18 PM
  #12  
Majestic_MAx05's Avatar
Senior Member
iTrader: (2)
 
Joined: Aug 2005
Posts: 980
OKay Ill give him a call tomo. Ill see when i can go in for the fitting
Old Oct 3, 2005 | 09:19 PM
  #13  
Tek-Niq's Avatar
my rear view mirrors flap like a f-ing bird
iTrader: (3)
 
Joined: Aug 2004
Posts: 5,268
sweet..... keep in touch.....
Old Oct 3, 2005 | 09:19 PM
  #14  
Majestic_MAx05's Avatar
Senior Member
iTrader: (2)
 
Joined: Aug 2005
Posts: 980
Yeah Ill keep you guys Posted
Old Oct 3, 2005 | 09:47 PM
  #15  
RHMax's Avatar
Newbie just Registered
 
Joined: May 2005
Posts: 2,795
From: LA/OC, CA
Originally Posted by Majestic_MAx05
Yeah Ill keep you guys Posted
See if there are any differences between auto and stick too.
Old Oct 3, 2005 | 09:47 PM
  #16  
Glude's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Feb 2003
Posts: 2,780
Good luck, thanks for doing this.
Old Oct 3, 2005 | 10:19 PM
  #17  
DeusExMaxima's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Nov 2004
Posts: 7,353
From: Upland CA
I am also 20 min from them too. A little birdie told me Cattman is going to make headers too.
Old Oct 3, 2005 | 10:51 PM
  #18  
Glude's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Feb 2003
Posts: 2,780
Those will be about 300-400 more though.
Old Oct 3, 2005 | 11:01 PM
  #19  
SEXIMA04's Avatar
Senior Member
iTrader: (2)
 
Joined: Oct 2005
Posts: 114
Headers....

Well.. Dat's Good Newss..

I Juss Finished Installing Headers On My 6h Generation Max.

I Got Black Max With A Lot Of Mods. Found Out This Website From My Friend..

Installing Headers Took Me About 7 Hours.. Bigggggggggg Gain.. Very Noticible. Luv It. Lots Of Power.

Will Post My Max Soon..


Now Cam Shaft Installation Starting From Tomorrow.. Big Day.. Argg~!!
Old Oct 3, 2005 | 11:04 PM
  #20  
RHMax's Avatar
Newbie just Registered
 
Joined: May 2005
Posts: 2,795
From: LA/OC, CA
Originally Posted by SEXIMA04
Well.. Dat's Good Newss..

I Juss Finished Installing Headers On My 6h Generation Max.

I Got Black Max With A Lot Of Mods. Found Out This Website From My Friend..

Installing Headers Took Me About 7 Hours.. Bigggggggggg Gain.. Very Noticible. Luv It. Lots Of Power.

Will Post My Max Soon..


Now Cam Shaft Installation Starting From Tomorrow.. Big Day.. Argg~!!
Okay??? What headers???
Old Oct 3, 2005 | 11:11 PM
  #21  
Glude's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Feb 2003
Posts: 2,780
Originally Posted by RHMax
Okay??? What headers???
I wanna know this as well.
Old Oct 3, 2005 | 11:28 PM
  #22  
DeusExMaxima's Avatar
Supporting Maxima.org Member
iTrader: (1)
 
Joined: Nov 2004
Posts: 7,353
From: Upland CA
Get a dyno on it
Old Oct 4, 2005 | 04:54 AM
  #23  
ramberg's Avatar
GrandPa
iTrader: (29)
 
Joined: Feb 2004
Posts: 3,914
From: Brooklyn, NY & Plantation, Fl.
Originally Posted by DeusExMaxima
I am also 20 min from them too. A little birdie told me Cattman is going to make headers too.
Like when?
Old Oct 4, 2005 | 04:58 AM
  #24  
ramberg's Avatar
GrandPa
iTrader: (29)
 
Joined: Feb 2004
Posts: 3,914
From: Brooklyn, NY & Plantation, Fl.
[QUOTE=SEXIMA04]

What company did you get these headers from?

As far as I know no one is making headers for our cars.
Old Oct 4, 2005 | 06:30 AM
  #25  
chernmax's Avatar
Nations 1st 6th Gen Turbo
iTrader: (15)
 
Joined: May 2005
Posts: 10,197
From: Displaced New Yorker in Southern, MD
Originally Posted by SEXIMA04
Well.. Dat's Good Newss..

I Juss Finished Installing Headers On My 6h Generation Max.

I Got Black Max With A Lot Of Mods. Found Out This Website From My Friend..

Installing Headers Took Me About 7 Hours.. Bigggggggggg Gain.. Very Noticible. Luv It. Lots Of Power.

Will Post My Max Soon..


Now Cam Shaft Installation Starting From Tomorrow.. Big Day.. Argg~!!


Who makes them or what brand did you modify???
Old Oct 4, 2005 | 11:37 AM
  #26  
05MaXiMaMenG's Avatar
Senior Member
 
Joined: Mar 2005
Posts: 281
From: Covina
hey i live like 10 mins from hotshot performance any word on the headers yet?
Old Oct 4, 2005 | 11:40 AM
  #27  
maxmale's Avatar
Senior Member
 
Joined: Sep 2002
Posts: 1,383
Originally Posted by SEXIMA04
Well.. Dat's Good Newss..

I Juss Finished Installing Headers On My 6h Generation Max.

I Got Black Max With A Lot Of Mods. Found Out This Website From My Friend..

Installing Headers Took Me About 7 Hours.. Bigggggggggg Gain.. Very Noticible. Luv It. Lots Of Power.

Will Post My Max Soon..


Now Cam Shaft Installation Starting From Tomorrow.. Big Day.. Argg~!!
well without pics or another response on who's you modified im throwing up a bs flag. but please by all means prove me wrong and point me in the right direction...
Old Oct 4, 2005 | 12:01 PM
  #28  
chernmax's Avatar
Nations 1st 6th Gen Turbo
iTrader: (15)
 
Joined: May 2005
Posts: 10,197
From: Displaced New Yorker in Southern, MD
Originally Posted by maxmale
well without pics or another response on who's you modified im throwing up a bs flag. but please by all means prove me wrong and point me in the right direction...


Sizes for all ages...

Old Oct 4, 2005 | 12:26 PM
  #29  
Tek-Niq's Avatar
my rear view mirrors flap like a f-ing bird
iTrader: (3)
 
Joined: Aug 2004
Posts: 5,268
he can't post pics guys, he doesn't have 15 post yet....

I really want to know what he has also, so if you have pics send them to me at pito3061@yahoo.com
Old Oct 4, 2005 | 01:57 PM
  #30  
Glude's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Feb 2003
Posts: 2,780
Originally Posted by 05MaXiMaMenG
hey i live like 10 mins from hotshot performance any word on the headers yet?
Well like I said, they need a donor car so they can test fit em. Get in touch with them Via email if your interested in being a donor. From what they told me, they should fit no problem with a very minor adjustment.
Old Oct 4, 2005 | 02:18 PM
  #31  
Majestic_MAx05's Avatar
Senior Member
iTrader: (2)
 
Joined: Aug 2005
Posts: 980
Hey I emailed them last night and havent heard from them yet. Ill give them a call in a couple of min.
Old Oct 5, 2005 | 06:46 AM
  #32  
maxmale's Avatar
Senior Member
 
Joined: Sep 2002
Posts: 1,383
Originally Posted by Majestic_MAx05
Hey I emailed them last night and havent heard from them yet. Ill give them a call in a couple of min.
DO IT NOW, DO IT NOW.
Old Oct 5, 2005 | 05:26 PM
  #33  
MAXDOUT04's Avatar
* THIS SPACE FOR RENT *
 
Joined: Feb 2004
Posts: 628
From: Fort Lauderdale
so still no reply from sexima04 ?
Old Oct 5, 2005 | 05:46 PM
  #34  
Glude's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Feb 2003
Posts: 2,780
So I see we have a couple people who are in their area, have any of you guys got in contact with them yet?
Old Oct 5, 2005 | 05:59 PM
  #35  
Majestic_MAx05's Avatar
Senior Member
iTrader: (2)
 
Joined: Aug 2005
Posts: 980
OKay I emailed them No responce. Called them and left messages. They haven't returned my calls so i don't know whats going on with them. I'll try again tomo.
Old Oct 5, 2005 | 06:14 PM
  #36  
Glude's Avatar
Thread Starter
Senior Member
iTrader: (5)
 
Joined: Feb 2003
Posts: 2,780
Yeah keep at em, I sent them the email last friday and they replied monday. Im sure they are just busy.
Old Oct 5, 2005 | 06:23 PM
  #37  
blackpaladin67's Avatar
Donating Maxima.org Member
 
Joined: Apr 2005
Posts: 451
And the silence was deafening

Originally Posted by SEXIMA04
Well.. Dat's Good Newss..

I Juss Finished Installing Headers On My 6h Generation Max.

I Got Black Max With A Lot Of Mods. Found Out This Website From My Friend..

Installing Headers Took Me About 7 Hours.. Bigggggggggg Gain.. Very Noticible. Luv It. Lots Of Power.

Will Post My Max Soon..


Now Cam Shaft Installation Starting From Tomorrow.. Big Day.. Argg~!!
And the silence was deafening

Show me your Goodies ...
Old Oct 5, 2005 | 07:12 PM
  #38  
RHMax's Avatar
Newbie just Registered
 
Joined: May 2005
Posts: 2,795
From: LA/OC, CA
Originally Posted by SEmy2K2go
Hotshot Performance
2643 Rosemead Blvd.
So. El Monte, CA 91733
I'll try to swing by, if I have some time tomorrow or Friday.
Old Oct 5, 2005 | 09:11 PM
  #39  
Majestic_MAx05's Avatar
Senior Member
iTrader: (2)
 
Joined: Aug 2005
Posts: 980
Yeah Im pretty sure they are busy, but ill keep trying
Old Oct 6, 2005 | 01:19 AM
  #40  
SEXIMA04's Avatar
Senior Member
iTrader: (2)
 
Joined: Oct 2005
Posts: 114
Dyno After I Install Stillen Cam. Shaft

If You Guys Wanna See The Headers In Person, We Can Meet Up.. I Live In Orange County,CA.



SOUNDS NICE, TOO.. GLAD I AM THE ONLY ONE WITH HEADERS.. HEHE.


THINK I AM B.S.??? GUESS ONLY WAY TO FIND OUT IS TO MEET UP.. THINKING ABOUT POSTING PIX..



All times are GMT -7. The time now is 12:03 PM.