Dyno Discussion and Slips Discussion and a moderated "Dyno Slips" sub-forum to allow for posting of dyno slips.

95BlkMax Tuned

Thread Tools
 
Search this Thread
 
Old Dec 18, 2005 | 09:23 AM
  #1  
95BLKMAX's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Jun 2003
Posts: 2,317
From: Miami, FL
95BlkMax Tuned



Hi all, As u can see the 1st run it was too rich for my taste right bet'n 4000 and 5000, so I leveled that as much as I could. I kept it at 13.4-13.8 most of the way except at redline. I could lean it a lil more from 6000-redline, but its not as if I'd see any noticeable increase in power with my USIM up there anyways.

Yes these are Standard #s, the place uses this. They use a tail-sniffer.

I am done with this motor. I told the owner of the shop the next time he saw me I'm bringing and extra .5 Liters . My mods are on my sig, and my previous best dyno without the SAFC was 184WHP/189WTQ, at the same dyno of course.
Old Dec 18, 2005 | 09:26 AM
  #2  
gtr_rider's Avatar
192.168.1.1
iTrader: (50)
 
Joined: Dec 2000
Posts: 17,617
From: Ft. Lauderdale, FL
good work ****
Old Dec 18, 2005 | 11:20 AM
  #3  
panda_1's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Oct 2003
Posts: 2,536
From: Port st Lucie
i dont like joo!!! lol
Old Dec 18, 2005 | 11:21 AM
  #4  
Digital's Avatar
VIP
iTrader: (1)
 
Joined: Oct 2003
Posts: 1,163
From: Fairfield County, CT
Nice job!
Old Dec 18, 2005 | 11:33 AM
  #5  
nismology's Avatar
Supporting Maxima.org Member
iTrader: (8)
 
Joined: Apr 2003
Posts: 9,099
From: Miami, FL
Nice numbers. But you already know how i feel about dyno's. They're only accurate/relevant on a mod-by-mod comparison basis on the same dyno. Moroso or dieeeeeee...
Old Dec 18, 2005 | 11:43 AM
  #6  
panda_1's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Oct 2003
Posts: 2,536
From: Port st Lucie
haha, at least his engine doesnt swallow mevi screws!!!
Old Dec 18, 2005 | 11:54 AM
  #7  
95BLKMAX's Avatar
Thread Starter
Senior Member
iTrader: (10)
 
Joined: Jun 2003
Posts: 2,317
From: Miami, FL
Originally Posted by nismology
Nice numbers. But you already know how i feel about dyno's. They're only accurate/relevant on a mod-by-mod comparison basis on the same dyno. Moroso or dieeeeeee...
Well in a way this is a mod-by-mod. The only thing different from my last best run to these tuned runs is the SAFC, so the SAFC increased 7HP and 6TQ at the wheels :-D
Old Dec 18, 2005 | 11:54 AM
  #8  
nismology's Avatar
Supporting Maxima.org Member
iTrader: (8)
 
Joined: Apr 2003
Posts: 9,099
From: Miami, FL
Originally Posted by 95BLKMAX
Well in a way this is a mod-by-mod. The only thing different from my last best run to these tuned runs is the SAFC, so the SAFC increased 7HP and 6TQ at the wheels :-D
No same dyno no care

Old Dec 18, 2005 | 11:55 AM
  #9  
nismology's Avatar
Supporting Maxima.org Member
iTrader: (8)
 
Joined: Apr 2003
Posts: 9,099
From: Miami, FL
Originally Posted by panda_1
haha, at least his engine doesnt swallow mevi screws!!!
Still runnin strong.......
Old Dec 18, 2005 | 12:02 PM
  #10  
panda_1's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Oct 2003
Posts: 2,536
From: Port st Lucie
blahhh too joo! when u droppin the 3.5 in that sloww **** 4th gen? even the high and mighty 4th genners want some part of a 5th gen !!!
Old Dec 18, 2005 | 12:14 PM
  #11  
nismology's Avatar
Supporting Maxima.org Member
iTrader: (8)
 
Joined: Apr 2003
Posts: 9,099
From: Miami, FL
Originally Posted by panda_1
blahhh too joo! when u droppin the 3.5 in that sloww **** 4th gen? even the high and mighty 4th genners want some part of a 5.5 gen !!!
Fixed...
Old Dec 18, 2005 | 12:23 PM
  #12  
panda_1's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Oct 2003
Posts: 2,536
From: Port st Lucie
not really, alot of 4th genners have gone DE-K, bish!
Old Dec 18, 2005 | 02:50 PM
  #13  
nismology's Avatar
Supporting Maxima.org Member
iTrader: (8)
 
Joined: Apr 2003
Posts: 9,099
From: Miami, FL
Originally Posted by panda_1
not really, alot of 4th genners have wasted their time with the DE-K, bish!
Really?? I woulda never guessed...









Old Dec 18, 2005 | 02:57 PM
  #14  
JClaw's Avatar
Supporting Maxima.org Member
iTrader: (17)
 
Joined: Aug 2004
Posts: 5,433
From: Montreal, Qc, Canada
More and more 3-liters hovering around the big 200 mark. Nice work
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
litch
4th Generation Maxima (1995-1999)
123
Jan 4, 2024 07:01 PM
aw11power
Supercharged/Turbocharged
161
Oct 10, 2021 04:57 AM
Socalstillen
4th Generation Maxima (1995-1999)
1
Sep 26, 2015 12:01 PM
zzznightmarezz
Maximas for Sale / Wanted
0
Sep 21, 2015 06:32 PM
Maxboy23
5th Generation Maxima (2000-2003)
6
Sep 4, 2015 06:04 PM




All times are GMT -7. The time now is 09:37 PM.