Question: Hp and TQ vs Weight
If Maxima #1 is lighter than Maxima #2 and Maxima #1 has higher HP and TQ Dyno Numbers than Maxima #2
does that mean that Maxima #1 is faster than Maxima #2?
Maxima #1 is 5spd
Maxima #2 is AUTO w/ VB.. stall convertor and other crazy stuff...
does that mean that Maxima #1 is faster than Maxima #2?
Maxima #1 is 5spd
Maxima #2 is AUTO w/ VB.. stall convertor and other crazy stuff...
Joined: Aug 2000
Posts: 6,344
Most likely #1 will win, but it still depends on the curve of the HP/TQ.
Lets take two auto maxima. #1 is SC and the dyno shows peak HP gain of 250hp. # 2 is nitrous and the dyno shows peak HP gain of 250hp. The nitrous guy will run faster.
If you compare the charts, you will see nitrous hits hard. It will give you instant 240ish hp @ 4k rpm. The HP stays like that to redline. The SC will have to boost up to 6.5K rpm to get to 250hp. The nitrous will give you massive Tq right from the start too.
Lets take two auto maxima. #1 is SC and the dyno shows peak HP gain of 250hp. # 2 is nitrous and the dyno shows peak HP gain of 250hp. The nitrous guy will run faster.
If you compare the charts, you will see nitrous hits hard. It will give you instant 240ish hp @ 4k rpm. The HP stays like that to redline. The SC will have to boost up to 6.5K rpm to get to 250hp. The nitrous will give you massive Tq right from the start too.
Originally posted by SprintMax
If Maxima #1 is lighter than Maxima #2 and Maxima #1 has higher HP and TQ Dyno Numbers than Maxima #2
does that mean that Maxima #1 is faster than Maxima #2?
Maxima #1 is 5spd
Maxima #2 is AUTO w/ VB.. stall convertor and other crazy stuff...
If Maxima #1 is lighter than Maxima #2 and Maxima #1 has higher HP and TQ Dyno Numbers than Maxima #2
does that mean that Maxima #1 is faster than Maxima #2?
Maxima #1 is 5spd
Maxima #2 is AUTO w/ VB.. stall convertor and other crazy stuff...
If it helps Maxima #1 and Maxima #2 are running the same shot of NOS
Originally posted by 1MAX2NV
Most likely #1 will win, but it still depends on the curve of the HP/TQ.
Lets take two auto maxima. #1 is SC and the dyno shows peak HP gain of 250hp. # 2 is nitrous and the dyno shows peak HP gain of 250hp. The nitrous guy will run faster.
If you compare the charts, you will see nitrous hits hard. It will give you instant 240ish hp @ 4k rpm. The HP stays like that to redline. The SC will have to boost up to 6.5K rpm to get to 250hp. The nitrous will give you massive Tq right from the start too.
Most likely #1 will win, but it still depends on the curve of the HP/TQ.
Lets take two auto maxima. #1 is SC and the dyno shows peak HP gain of 250hp. # 2 is nitrous and the dyno shows peak HP gain of 250hp. The nitrous guy will run faster.
If you compare the charts, you will see nitrous hits hard. It will give you instant 240ish hp @ 4k rpm. The HP stays like that to redline. The SC will have to boost up to 6.5K rpm to get to 250hp. The nitrous will give you massive Tq right from the start too.
Originally posted by SprintMax
If it helps Maxima #1 and Maxima #2 are running the same shot of NOS
If it helps Maxima #1 and Maxima #2 are running the same shot of NOS
this is way out of your league Steve.. i am not even in this class
Originally posted by dmbmaxima88
you can add maxima #3 to this arguement. just give me another week or so, i got my cai on today. NOS is next, just need the time.
you can add maxima #3 to this arguement. just give me another week or so, i got my cai on today. NOS is next, just need the time.
Joined: Aug 2000
Posts: 6,344
Oh...you are talking about Synki. You probably have the edge, but it all depends how you drive. If you can't control your wheelspins or miss a shift....
Originally posted by SprintMax
If it helps Maxima #1 and Maxima #2 are running the same shot of NOS
If it helps Maxima #1 and Maxima #2 are running the same shot of NOS
Nothing crazy here. And i dont have a new torque converter. But that will be on its way soon though.
Tony, i dont think he is referring to me. At least not to my knowledge. But Sprnt is out of my league though.
Maybe he is talkin about yours?
Tony, i dont think he is referring to me. At least not to my knowledge. But Sprnt is out of my league though.
Maybe he is talkin about yours?
Originally posted by yongjun
I don't know
all i know is.
The fast maximas are in Texas
I don't know

all i know is.
The fast maximas are in Texas
you guys talk about 100 shot NOS and smaller pulley S/C and that fine .. but thas only 15-20 guys on this BBS ..
do you think STillen would fabricate an S/C for less that 500 units or prolly more like 1000 units ?
Ant
Originally posted by Ant95se
you are soo wrong .. I'll bet you the fastest maxima isn't even on this board.. do you have any idea how many S/C'd maxima's there are out there that don't post here ..
you guys talk about 100 shot NOS and smaller pulley S/C and that fine .. but thas only 15-20 guys on this BBS ..
do you think STillen would fabricate an S/C for less that 500 units or prolly more like 1000 units ?
Ant
you are soo wrong .. I'll bet you the fastest maxima isn't even on this board.. do you have any idea how many S/C'd maxima's there are out there that don't post here ..
you guys talk about 100 shot NOS and smaller pulley S/C and that fine .. but thas only 15-20 guys on this BBS ..
do you think STillen would fabricate an S/C for less that 500 units or prolly more like 1000 units ?
Ant
Ant - "so young.. so angry.. damn that rap music" 

Originally posted by Ant95se
you are soo wrong .. I'll bet you the fastest maxima isn't even on this board.. do you have any idea how many S/C'd maxima's there are out there that don't post here ..
you guys talk about 100 shot NOS and smaller pulley S/C and that fine .. but thas only 15-20 guys on this BBS ..
do you think STillen would fabricate an S/C for less that 500 units or prolly more like 1000 units ?
Ant
you are soo wrong .. I'll bet you the fastest maxima isn't even on this board.. do you have any idea how many S/C'd maxima's there are out there that don't post here ..
you guys talk about 100 shot NOS and smaller pulley S/C and that fine .. but thas only 15-20 guys on this BBS ..
do you think STillen would fabricate an S/C for less that 500 units or prolly more like 1000 units ?
Ant
Originally posted by Ant95se
you are soo wrong .. I'll bet you the fastest maxima isn't even on this board.. do you have any idea how many S/C'd maxima's there are out there that don't post here ..
you guys talk about 100 shot NOS and smaller pulley S/C and that fine .. but thas only 15-20 guys on this BBS ..
do you think STillen would fabricate an S/C for less that 500 units or prolly more like 1000 units ?
Ant
you are soo wrong .. I'll bet you the fastest maxima isn't even on this board.. do you have any idea how many S/C'd maxima's there are out there that don't post here ..
you guys talk about 100 shot NOS and smaller pulley S/C and that fine .. but thas only 15-20 guys on this BBS ..
do you think STillen would fabricate an S/C for less that 500 units or prolly more like 1000 units ?
Ant
ants its ok I forgive you

now wanna race?
Originally posted by yongjun
ants its ok I forgive you
now wanna race?
ants its ok I forgive you

now wanna race?
all my races are now taken care of by my second vehicle...
want a hint

Still wanna race ?
Sprint: i didn't see taht doolite commericial and beside that fact i think that movie is retarded, but thas another topic
Ant
Originally posted by medicsonic
Oh, a bike. What kind?
Oh, a bike. What kind?
with all this nitrous goin around i just had to have some
so i put NOS on my old Puch moped, i'm only running a 125shot right now because of traction problems ..
my other mods are custom intake
a old 2 barrel carb
ultra high free flow exhaust
i attached my gauge pod to my right handle bar for EGT's and my A/F gauge
my only race soo far was this pesky Twin Turbo Hennessy Venom Viper POS .. boy did i smoke him ..
Ant




