For Sale: Ready to Drop In VQ35 Engine
For Sale: Ready to Drop In VQ35 Engine
Well since there has a been alot of interest in this I figure I would make an official thread.
I have for sale a VQ35 Engine that is already to be installed into a 4th Gen. I purchased this engine with the intent to install it but I never got around to it and it has just been stored away in my storage.
Tilley built this engine for a friend of mine, who then sold it to me. Since the building of this engine, it has NOT been installed.
2002 VQ35 w/ less then 20k Miles
Drilled Cams / Dowels
JWT Spacers
3.0 Timing Componets and Timing Cases
2002 Pathfinder Throttle Body Edit: Seems as this is not a PF Throttle Body rather a 3.0 Throttle Body
2002 Knock Sensor
All you should need to do is install some of your 3.0 Componets (i.e. Sensors, Cps, Headers, etc.)
You will also need to wire the injectors which our included.
A full write up can be found in the All Motor Forum.
I do not have any pictures of this engine completed but will take pictures to verify that I do indeed have this. It is still on a crate and has cardboard and straps still securing it. I do not want to remove this as it is already to ship.
Price: $1650.00 OBO + Shipping
EDIT: I know longer have access to my shipper so I have lowered the price to 1650.00 OBO and shipping costs and arrangements are to be taken care of by the buyer.
As usual, LOCAL members get first dibs.
Pictures:
I have for sale a VQ35 Engine that is already to be installed into a 4th Gen. I purchased this engine with the intent to install it but I never got around to it and it has just been stored away in my storage.
Tilley built this engine for a friend of mine, who then sold it to me. Since the building of this engine, it has NOT been installed.
2002 VQ35 w/ less then 20k Miles
Drilled Cams / Dowels
JWT Spacers
3.0 Timing Componets and Timing Cases
2002 Pathfinder Throttle Body Edit: Seems as this is not a PF Throttle Body rather a 3.0 Throttle Body
2002 Knock Sensor
All you should need to do is install some of your 3.0 Componets (i.e. Sensors, Cps, Headers, etc.)
You will also need to wire the injectors which our included.
A full write up can be found in the All Motor Forum.
I do not have any pictures of this engine completed but will take pictures to verify that I do indeed have this. It is still on a crate and has cardboard and straps still securing it. I do not want to remove this as it is already to ship.
Price: $1650.00 OBO + Shipping
EDIT: I know longer have access to my shipper so I have lowered the price to 1650.00 OBO and shipping costs and arrangements are to be taken care of by the buyer.
As usual, LOCAL members get first dibs.
Pictures:
Just to be clear, I will NOT sell this for 1000.00 please stop with the low ball offers. I do NOT NEED to sell this and there for can wait for offers closer to what I am asking.
Also Local members get first dibs.
Also Local members get first dibs.
Oh my god! This thing is seriously priced to sell! Anyone looking for the swap should be picking this thing up. It's already put together! If my chassis wasn't so rusted I'd be doing the swap myself already. I'll have to pass on this deal until I decide to get another (cleaner chassis) maxima.
Bump for an unbeatable price.
Bump for an unbeatable price.
Originally Posted by SpeedCrazie
Sorry I forgot to mention that it already has a modified 2002 Pathfinder Throttle Body installed.
Edit: First Post Updated.
Edit: First Post Updated.
That's not a pathfinder throttle body. It's a Maxima 3.0 TB drilled to fit. The Pathfinder is much bigger, and has an IACV on the bottom.
Junior Member
Joined: Jun 2005
Posts: 12
Is It Still For Sale
Originally Posted by SpeedCrazie
Well since there has a been alot of interest in this I figure I would make an official thread.
I have for sale a VQ35 Engine that is already to be installed into a 4th Gen. I purchased this engine with the intent to install it but I never got around to it and it has just been stored away in my storage.
Tilley built this engine for a friend of mine, who then sold it to me. Since the building of this engine, it has NOT been installed.
2002 VQ35 w/ less then 20k Miles
Drilled Cams / Dowels
JWT Spacers
3.0 Timing Componets and Timing Cases
2002 Pathfinder Throttle Body Edit: Seems as this is not a PF Throttle Body rather a 3.0 Throttle Body
2002 Knock Sensor
All you should need to do is install some of your 3.0 Componets (i.e. Sensors, Cps, Headers, etc.)
You will also need to wire the injectors which our included.
A full write up can be found in the All Motor Forum.
I do not have any pictures of this engine completed but will take pictures to verify that I do indeed have this. It is still on a crate and has cardboard and straps still securing it. I do not want to remove this as it is already to ship.
Price: $1850 Shipped OBO
Pictures:
I have for sale a VQ35 Engine that is already to be installed into a 4th Gen. I purchased this engine with the intent to install it but I never got around to it and it has just been stored away in my storage.
Tilley built this engine for a friend of mine, who then sold it to me. Since the building of this engine, it has NOT been installed.
2002 VQ35 w/ less then 20k Miles
Drilled Cams / Dowels
JWT Spacers
3.0 Timing Componets and Timing Cases
2002 Pathfinder Throttle Body Edit: Seems as this is not a PF Throttle Body rather a 3.0 Throttle Body
2002 Knock Sensor
All you should need to do is install some of your 3.0 Componets (i.e. Sensors, Cps, Headers, etc.)
You will also need to wire the injectors which our included.
A full write up can be found in the All Motor Forum.
I do not have any pictures of this engine completed but will take pictures to verify that I do indeed have this. It is still on a crate and has cardboard and straps still securing it. I do not want to remove this as it is already to ship.
Price: $1850 Shipped OBO
Pictures:
Junior Member
Joined: Jun 2005
Posts: 12
Alright, the engine is officially up for sale agian. I am now asking only 1650.00 obo however shipping arrangments and costs are to be taken care of by the buyer.
I know longer have access to my shipper so that is why I am not including it in the price any longer.
First Post will be updated.
Also, to those that have previously contacted me, and are still interested I will go in order that I was contacted as I still have the original PM's.
I know longer have access to my shipper so that is why I am not including it in the price any longer.
First Post will be updated.
Also, to those that have previously contacted me, and are still interested I will go in order that I was contacted as I still have the original PM's.
Junior Member
Joined: Jun 2005
Posts: 12
WELL I'M VERY MUCH INTERESTED PLS CONTACT ME ON AOL AIM CUPIT867 OR EMAIL ME CUPIT867@AOL.COM
Originally Posted by SpeedCrazie
Alright, the engine is officially up for sale agian. I am now asking only 1650.00 obo however shipping arrangments and costs are to be taken care of by the buyer.
I know longer have access to my shipper so that is why I am not including it in the price any longer.
First Post will be updated.
Also, to those that have previously contacted me, and are still interested I will go in order that I was contacted as I still have the original PM's.
I know longer have access to my shipper so that is why I am not including it in the price any longer.
First Post will be updated.
Also, to those that have previously contacted me, and are still interested I will go in order that I was contacted as I still have the original PM's.
J/k good luck with the sale.
Thread
Thread Starter
Forum
Replies
Last Post
derekinthez
7th Generation Classifieds (2009-2015)
2
Nov 13, 2022 04:00 PM
fastcarny
5th Generation Maxima (2000-2003)
2
Oct 6, 2015 10:42 AM