Gi : VQ35 02- up Top Speed Cams
Thread Starter
Senior Member
iTrader: (45)
Joined: Nov 2002
Posts: 4,246
From: Florida /Wade County !
Gi : VQ35 02- up Top Speed Cams
http://www.topspeedauto.com/ProductC...idCategory=159
These NISMO 350Z Camshafts maintain low end torque while increasing mid and top end power. NISMO 350Z cams have been computer designed for the 350Z with 350Z specific lift and duration. These NISMO 350Z Camshafts are precision ground from billet cores. No other adjustments are required of the 350Z ECU or the engine to make these NISMO cams work. However, we suggest installing a 350Z cold air intake with an ECU reflash to take advantage of the power at higher RPM's. For the ultimate setup, check out the headers and exhausts we carry as well! Use the 350Z's factory service manual to install these. ***These parts are not warranted by Nissan as they are considered 350Z race parts.*** These NISMO 350Z cams have 262 degree duration and .426" lift. Cold lash is set at .010" to .013".
Since PRO-1's were completely replicated from Nismo Camshafts (just like Jim Wolfe's) we used their write up sheet about the cams. With over 22 sets sold without a problem, we stand behind these 100%
Since my Uncle use to own Top Speed and later left , I still have connection with these guys.
If I can get 5 or more guys I can get these $550 shipped to my door.
I have 2 sets already to be order.
I offer this to SouthFloridaMaxima guys so far cause I want to stay local.
If you guys order thru me I will do the same price BUT most likely once its shipped to me , I will have to spend the extra money to shipped outside of Florida. Im just seeing if anyone is interstead in a set of Cams.
These retail for $800
Cost is around $650
So im getting a deal cause it use to be family owned, there isnt a Time Table for this as of yet.
I will only shipped 48 States, guys in Canada im sorry.
Let me know what you guys think, Im order 2 sets for myself already so all I really need is 3 more guys on the deal BUT I would like to get more guys to join in to save shipping cost to me.
Email me at NiZMo1o1@yahoo.com for further question
These NISMO 350Z Camshafts maintain low end torque while increasing mid and top end power. NISMO 350Z cams have been computer designed for the 350Z with 350Z specific lift and duration. These NISMO 350Z Camshafts are precision ground from billet cores. No other adjustments are required of the 350Z ECU or the engine to make these NISMO cams work. However, we suggest installing a 350Z cold air intake with an ECU reflash to take advantage of the power at higher RPM's. For the ultimate setup, check out the headers and exhausts we carry as well! Use the 350Z's factory service manual to install these. ***These parts are not warranted by Nissan as they are considered 350Z race parts.*** These NISMO 350Z cams have 262 degree duration and .426" lift. Cold lash is set at .010" to .013".
Since PRO-1's were completely replicated from Nismo Camshafts (just like Jim Wolfe's) we used their write up sheet about the cams. With over 22 sets sold without a problem, we stand behind these 100%
Since my Uncle use to own Top Speed and later left , I still have connection with these guys.
If I can get 5 or more guys I can get these $550 shipped to my door.
I have 2 sets already to be order.
I offer this to SouthFloridaMaxima guys so far cause I want to stay local.
If you guys order thru me I will do the same price BUT most likely once its shipped to me , I will have to spend the extra money to shipped outside of Florida. Im just seeing if anyone is interstead in a set of Cams.
These retail for $800
Cost is around $650
So im getting a deal cause it use to be family owned, there isnt a Time Table for this as of yet.
I will only shipped 48 States, guys in Canada im sorry.
Let me know what you guys think, Im order 2 sets for myself already so all I really need is 3 more guys on the deal BUT I would like to get more guys to join in to save shipping cost to me.
Email me at NiZMo1o1@yahoo.com for further question
Thread
Thread Starter
Forum
Replies
Last Post
CAN-Toronto FS: Basement cleaning
knight_yyz
5th Generation Classifieds (2000-2003)
12
Nov 1, 2015 01:34 PM