i have a 95 gle. i am getting the infamous p1320 code. i have done everything i could possibly do to fix this problem. i have replaced all 6 coils, crank (pos) and (ref), and cam sensor. i changed even the harness and condenser. i have a new knock sensor and fresh plugs. all are nissan parts. this car have cost me a whole lot. i still get the same code. i car hesitates right at take off but revs smooth without any load. it just bogs and studders at take off from idle. please give any inputs. i have search and all the same thing pops up, which is everything i have replaced with new factory parts. i think i will try getting another ecu and plug it up to try next. any other input will be appreciated. please give me some insight.

 

Don't know if this helps or not but something similar happen to my but m code was 1336 so after replacing the Pos and checking just about evrything i took out the Pos and look at the timing ring(behind flywheel) and it was stripped so basically the Pos could not read it so won't hurt to check yours all it take is a 10mm bolt and a flashlight