Maxima breaking into the 12's!!!
hmm
twin turbo 5th Gen?
twin turbo 5th Gen?
Ok I finally sold my Stillen S/C. I will be removing it by next week (after I try to break into the 12's Tuesday at Atco). My next project will be a twin turbo kit. I will be using 2 Garrett T3 turbo's off of 2 Saab's I snagged from the junkyard. I just had them both rebuilt. I will be using the stock exhaust manifolds and using custom adapter piping. The Turbo's have internal wastegates and I have threaded the arm's (to adjust boost). I will be using the same starion IC and BOV that I used with the S/C. I will be simply plumbing both turbo's into the IC (ala Supra). Since a supercharger robs about 30% of power output from its belt drive, the turbo setup should in theory make 30% more HP at the same boost setting. With 2 relatively small turbo's lag should be minimal. I have completed most of the welding I need. Hopefully I will have the turbo's dialed in by the end of next week. I have also obtained an aqua mist water injection system I will be using on this project.
Here's a pic of the turbo's I will be using
Here's a pic of the turbo's I will be using
http://www.5thgenmaximas.com/vbb/sho...light=forcefed
hmm twin turbo for under $1000 .. now that sounds interesting
hmm twin turbo for under $1000 .. now that sounds interesting
Originally posted by ohboiya
nono ... he dunno have twins yet ... using a midget running 17 psi right now (since that time he's sold it)
that's why he's working on teh twins!
kewl huh?
nono ... he dunno have twins yet ... using a midget running 17 psi right now (since that time he's sold it)
that's why he's working on teh twins!
kewl huh?
and running 12.7 on 17 PSI? that doesn't sound right..
Delos runs 13.3 on 6.5 PSI
Originally posted by SprintMax
second of all.. vortech doesn't make a pulley small enough for 17 PSI.. the smallest you can go is 14 PSI ..
i don't think thats Adam's car
second of all.. vortech doesn't make a pulley small enough for 17 PSI.. the smallest you can go is 14 PSI ..
i don't think thats Adam's car
Originally posted by spyder
ive looked into it and she has a little more to go...
2.75 pulley and gets 17psi and yet the 2.67 gets 14... hrmmm odd i thought the smaller pulleys give more power
ive looked into it and she has a little more to go...
2.75 pulley and gets 17psi and yet the 2.67 gets 14... hrmmm odd i thought the smaller pulleys give more power
Originally posted by spyder
ive looked into it and she has a little more to go...
2.75 pulley and gets 17psi and yet the 2.67 gets 14... hrmmm odd i thought the smaller pulleys give more power
ive looked into it and she has a little more to go...
2.75 pulley and gets 17psi and yet the 2.67 gets 14... hrmmm odd i thought the smaller pulleys give more power
No no no no.... he said his 2.75" gives him 17 psi. I don't know how that works since 2.67" gives 14 psi. 2.75" should give about 13-13.5 psi by my calculations.
He's posted more on his theory of why 17 psi works without strengthening internals: http://www.5thgenmaximas.com/vbb/sho...=&threadid=522
He's posted more on his theory of why 17 psi works without strengthening internals: http://www.5thgenmaximas.com/vbb/sho...=&threadid=522
Senior Member
Joined: Dec 2000
Posts: 8,765
From: Westchester County, NY
1.)The MSD ignition will not work on our cars, various members called MSD to ask.
2.)The only JWT ECU produced for the Max was a '96 unit, there are none for the 5th gens.
3.)His numbers didn't add up, from his track times to his dyno numbers to his puley sizes.
People are relatively knowledgable about these engines, and trying to pull someones card will get you outeed very quickly.
2.)The only JWT ECU produced for the Max was a '96 unit, there are none for the 5th gens.
3.)His numbers didn't add up, from his track times to his dyno numbers to his puley sizes.
People are relatively knowledgable about these engines, and trying to pull someones card will get you outeed very quickly.
Overall,
I have to wonder why this wasn't posted in this forum......
Well, I know the answer, but still.......:vampire:
Didn't even have the guts to spew that stuff in my world. How cowardly....
Paul2kGXE,
I would appreciate it if you could privately PM or e-mail me the IP address of this "person"......so I can do some private member checking.....
If you can't, don't sweat it.
I have to wonder why this wasn't posted in this forum......
Well, I know the answer, but still.......:vampire:
Didn't even have the guts to spew that stuff in my world. How cowardly....
Paul2kGXE,
I would appreciate it if you could privately PM or e-mail me the IP address of this "person"......so I can do some private member checking.....
If you can't, don't sweat it.
Not DAVEB the parts guy
Joined: Aug 2000
Posts: 8,549
I think it's all BS. He's quick to offer pictures of his car and what he's gonna put on, but he's shown no pictures of under the hood nor of the timeslips nor of him at the track. He's pulling 1.8 60 foots which is pretty unbelievable, even with slicks. His trap speeds are only 108mph and that's with his "17 psi". He syas his trap speeds are low because of the small diameter slicks. BS, with 17 psi he'd be well into 112mph range. 1.8 60s would destroy the differential too. He says he finally broke into the 12s a few days ago and he is removing his SC right now as we speak. He says his twin turbo setup will be in by the end of the week. Yeah...okay.
IMO, I think it's MY4DSC (or whatever his name is) playing a dirty trick......and a good one at that. There sure are a lot of gullable people out there
Dave
IMO, I think it's MY4DSC (or whatever his name is) playing a dirty trick......and a good one at that. There sure are a lot of gullable people out there
Dave
well fellas....
I'm back from 5thgenmaxima.com...man was it HOT! over there
very hard to belive..pics,proof of all of this would be good....
he went real low by saying our cars are slow like our site the org.....ooooohhhh.....
very hard to belive..pics,proof of all of this would be good....
he went real low by saying our cars are slow like our site the org.....ooooohhhh.....
Alot of people may not like adam.. but he is a straight shooter and doesn't have to BS anyone with false stories.. Adam use to own a Turbo Civic that ran faster than any maxima here..
Originally posted by Dave B
I think it's all BS. He's quick to offer pictures of his car and what he's gonna put on, but he's shown no pictures of under the hood nor of the timeslips nor of him at the track. He's pulling 1.8 60 foots which is pretty unbelievable, even with slicks. His trap speeds are only 108mph and that's with his "17 psi". He syas his trap speeds are low because of the small diameter slicks. BS, with 17 psi he'd be well into 112mph range. 1.8 60s would destroy the differential too. He says he finally broke into the 12s a few days ago and he is removing his SC right now as we speak. He says his twin turbo setup will be in by the end of the week. Yeah...okay.
IMO, I think it's MY4DSC (or whatever his name is) playing a dirty trick......and a good one at that. There sure are a lot of gullable people out there
Dave
I think it's all BS. He's quick to offer pictures of his car and what he's gonna put on, but he's shown no pictures of under the hood nor of the timeslips nor of him at the track. He's pulling 1.8 60 foots which is pretty unbelievable, even with slicks. His trap speeds are only 108mph and that's with his "17 psi". He syas his trap speeds are low because of the small diameter slicks. BS, with 17 psi he'd be well into 112mph range. 1.8 60s would destroy the differential too. He says he finally broke into the 12s a few days ago and he is removing his SC right now as we speak. He says his twin turbo setup will be in by the end of the week. Yeah...okay.
IMO, I think it's MY4DSC (or whatever his name is) playing a dirty trick......and a good one at that. There sure are a lot of gullable people out there
Dave
YUP......
remember when he caught a few people with his "Skyline motor" swap(I think thats what it was) a few months back.....turned out to be a picture from Overboost.com...
Originally posted by Dave B
IMO, I think it's MY4DSC (or whatever his name is) playing a dirty trick......and a good one at that.
IMO, I think it's MY4DSC (or whatever his name is) playing a dirty trick......and a good one at that.
Guest
Posts: n/a
Originally posted by Dave B
IMO, I think it's MY4DSC (or whatever his name is) playing a dirty trick......and a good one at that. There sure are a lot of gullable people out there
Dave
IMO, I think it's MY4DSC (or whatever his name is) playing a dirty trick......and a good one at that. There sure are a lot of gullable people out there
Dave
That ain't me maaaaaaan!
I ain't that ignorant, I'm a much better liar...lol.
Guest
Posts: n/a
On a serious note...
Everyone be patient...
It may not be a twin, but soon there will be a Turbo kit available for the Max...
PS: That really isn't me...& that whole Twin Turbo SuperCharged Skyline swap thing was a joke...you all know that...lol
It may not be a twin, but soon there will be a Turbo kit available for the Max...
PS: That really isn't me...& that whole Twin Turbo SuperCharged Skyline swap thing was a joke...you all know that...lol
For those who were here a couple years back
When Turbo95Max was posting about his set-up and no one believed him. At that time he wasn't able to post pics as fast as you gugs wanted, so again no one believed him. Fast foward to the present, not only have you guys seen his set-up but we now have other members created/designing a turbo system. Even a few 3rd gen members are at it. Basically give him time, if all his numbers and mod info don't match up who are we to call him a liar
Come to think about it, we were on someone else BBS when Turbo95Max was telling about his set-up.
Come to think about it, we were on someone else BBS when Turbo95Max was telling about his set-up.