4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

blinking cruise control light

Thread Tools
 
Search this Thread
 
Old Aug 3, 2008 | 07:24 AM
  #1  
Sounbwoy's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Jan 2005
Posts: 1,042
blinking cruise control light

In all the years I have been driving this car I have never seen it do what it did last night. Headed down the highway at 55mph on cruise (I'm a believer in the use of CC), the car suddenly slowed down and the "CRUISE" light on the dash started blinking rapidly. The buttons didn't work. I turned the cruise control OFF, turned it back ON, engaged it, and all was fine and it didn't act up the rest of the trip. My CEL did not come on ( I know of two codes that I have currently which are the knock sensor and vehicle speed sensor codes).
I thought the VSS may have been the culprit, but I've had that code for well over a year now and the cruise control has ALWAYS worked.
What could have caused the car to suddenly lose the CC and the light to blink rapidly?
Old Aug 3, 2008 | 09:35 AM
  #2  
johnt671's Avatar
Junior Member
 
Joined: Feb 2007
Posts: 27
When I got the VSS code it didn't stay gone for long after I replaced the VSS and reset the computer. Researching the form showed that the VSS code can also be a problem in the speedo circuit loose screws on the back of the instrument panel or a bad speedo. Mine was a bad speedo. If I remember right, problems related the that code could cause problems with the cruise control.
Old Aug 3, 2008 | 02:47 PM
  #3  
Slickismax's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Aug 2000
Posts: 1,161
From: Oklahoma City, OK
It sounds like the VSS might have lost signal for a second. The CC will also do that if you hit a patch of ice, get air, or hydroplane. It the VSS signal jumps/drops too quickly the CC will turn off and the light will flash.
Old Aug 3, 2008 | 06:44 PM
  #4  
mrmagicpapi's Avatar
Member
 
Joined: Mar 2006
Posts: 38
I have the same problem. I dont even use my cc any more. Your VSS code is the cause. Like the guy who posted b4 me said the signal comes and goes. Its either ur VSS, speedo, or loose screws behind ur cluster (speedo). In my case, i've changed my VSS, & tighten up the screws, and no change in mil going away. Determined that i have a bad speedo. Going to change the whole cluster, cuz i learn that the longer u wait to change the cluster, eventually other parts of it begin 2 fail as well Think about it, its a circuit board behind there, one part fails, soon it will all fail. My gas gauge stop working once. It works now, who knows wen it will fail again. The gas light stopped working permanently over a yr ago.
Old Aug 3, 2008 | 06:53 PM
  #5  
khantalha+'s Avatar
Senior Member
iTrader: (15)
 
Joined: Dec 2005
Posts: 6,601
From: Akron, Ohio
i have a couple of speedos laying around lemme know if u guyz are looking for some
Old Aug 3, 2008 | 11:10 PM
  #6  
Sounbwoy's Avatar
Thread Starter
Senior Member
iTrader: (2)
 
Joined: Jan 2005
Posts: 1,042
thanks!
Old Aug 3, 2008 | 11:45 PM
  #7  
arrocha87's Avatar
Senior Member
 
Joined: Mar 2008
Posts: 540
From: dallas, tx
how do i know if my gas light works? i want to find out but im scared of running out of gas! lol. 95 SE 5MT
Old Aug 4, 2008 | 07:37 AM
  #8  
Slickismax's Avatar
Supporting Maxima.org Member
iTrader: (4)
 
Joined: Aug 2000
Posts: 1,161
From: Oklahoma City, OK
Originally Posted by mrmagicpapi
I have the same problem. I dont even use my cc any more. Your VSS code is the cause. Like the guy who posted b4 me said the signal comes and goes. Its either ur VSS, speedo, or loose screws behind ur cluster (speedo). In my case, i've changed my VSS, & tighten up the screws, and no change in mil going away. Determined that i have a bad speedo. Going to change the whole cluster, cuz i learn that the longer u wait to change the cluster, eventually other parts of it begin 2 fail as well Think about it, its a circuit board behind there, one part fails, soon it will all fail. My gas gauge stop working once. It works now, who knows wen it will fail again. The gas light stopped working permanently over a yr ago.
My speedo stopped working and it was the wiring harness behind the cluster. I had to run new wires from the VSS to the speedo. Now everything works as it should.
Old Aug 4, 2008 | 04:24 PM
  #9  
The Wizard's Avatar
Administrator
iTrader: (43)
 
Joined: Feb 2002
Posts: 16,718
From: Southern California
Originally Posted by arrocha87
how do i know if my gas light works? i want to find out but im scared of running out of gas! lol. 95 SE 5MT
Only 1 way to find out for sure... drive it on E. Carry 1 gallon of gas in a gas can just in case...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stevesmax
5th Generation Maxima (2000-2003)
17
Dec 17, 2020 11:57 AM
trasmadean
6th Generation Maxima (2004-2008)
13
Feb 1, 2017 08:20 PM
schmellyfart
All Motor
7
Sep 25, 2015 04:47 PM
Nismo_Guy89
4th Generation Maxima (1995-1999)
8
Aug 24, 2015 09:49 PM
Tanvirkamal
7th Generation Maxima (2009-2015)
4
Aug 5, 2015 01:32 AM




All times are GMT -7. The time now is 11:16 AM.