lets keep it short... came back from work and it was drizzling a lil bit so turned my wipers to intermittent, and they wont work, drop it down to the second position(normal speed) they are working, go to the third one(fast speed), they are working, go back to intermittent, nothing...
come home, get out of the car, tried to lock it with the remote... guess what...
remote wont do **** at all... security light stopped blinking too...already check all the fuses and everything looked good....any one have any idea what is goin on...
tnx
T

 

pull out the fsm and trace the wiring diagram to the point where they have a connection in common, then find that connection in the car and trace back manually to the battery and somewhere along the way you will probably find a damaged wire

 

Do clock and vanity (visor) lights work? If not fuse #40 7.5AMP is blown.
Is there anything else that is not working?
Both intermittent wiper operation and anti-theft system are controlled by the body control module something may be going on with that.

 

Have you done any work on the electrical system lately? Does the car have any add-on or aftermarket wiring/electronics? Problem just started out of the blue?

 

not all i got is mevi, rpm switch and etc...

 

the both work..

 

Check if anything else is out door locks, sunroof, trunk pop, audio, anything?

 

my guess is bcm module, or a wire like stated above.

 

everything working my friend

 

Check fuse #19 7.5 Amp very closely remove it and look at it. That fuse is used for the theft and wiper circuits.

 

Have you checked under hood fuses by battery, there is a 7.5Amp on there also a possibility. How are you checking fuses? Visually? If you are checking fuses with a fuse tester while the fuse is in the fuse holder? That is not reliable.

 

yeah i check all the fuses under the hood, i am gonna do lil more hunting tomorrow and wil let u know whats goin on...

 

have u done a swap from normal to intermittent? Your locks, and wipers are controlled by your BCM(just looked through the Haynes electrical).

 

ok i ll check .. no my car is a se and it came with the interittent wipers

 

Allright try fuse(these are for power locks 97-99, 95-96 is different) #40 7.5a, yel/blu wire from bcm to key switch, from key switch to fuse block its yel/blk(key switch) #12 7.5a pnk/grn from bcm to fuse block(IGN) Fuse #56 7.5a pnk from bcm to fusible link box(bat). For your wiper, fuse #19 7.5a, ppl from bcm to itermittent on the wiper stalk. I guess if all else fails, try to unplug it and plug it back in. If you need a new BCM, I got 2 for sale. I can check them to see if they work if you need one.

 

i ll let you know tomorrow

 

its fixed now i unplugged the bcm and let it sit for couple hours and plugged it back in and there it is my...everything working


just wanted to let you peeps know its working and thank you so much for the responses/help....i really appreciate it

 

Glad to know. Good thing you didnt buy a new one. Sometimes thats all it takes is to unplug it and plug it back in, it resets it, and in your case it all worked out.

 

yep

thanks for the help bro