These are 4 wire grounding kits, and will fit 04-08 Maxima's. They are based on the "Active Tuning" kits. I can also do "custom" kits, and "Big 3 upgrade" kits...all I need are the number of wires needed, and the lengths.
I have the wire on hand to make these up, all I need to do is crimp the connectors. Here are photos of the crimps using the hydraulic crimper.




I have the wire on hand to make up these kits right now:
1-4 gauge red kit -- $45 shipped
1-4 gauge blue kit -- $45 shipped
2 4 gauge blk/dk smoke -- $45 shipped




This is an Infiniti kit that I made for a moderator on another forum:


I can also make up 1/0 kits in red, blue, or dk smoke/black -- $70 shipped

All prices are shipped within the Continental U.S. via USPS Priority Mail.

All of the ring terminals have been crimped on using an 8 ton hydraulic crimper (see photos), and then sealed with heat shrink. I did not solder the terminals, as it is not needed after using this crimper.
The 1/0 gauge wire kits are made with Knu Fleks wire---$60 shipped
The 4 gauge wire kits are also made with Knu Fleks wire---$40 shipped
Knu Konceptz is local to me, so I have no problem getting materials for more kits. I can get 1/0 or 4 gauge in red, blue, or black (dark smoke). I have no problem ordering more wire if somebody wants something that I don't have. I am setup for pay-pal, and I will ship USPS priority mail w/delivery confirmation.
I can also get TechFlex if anybody wants the wires covered. Adding the TechFlex will add $15 to the cost of the kit, and WILL ADD AN ADDITIONAL WEEK to the turnaround time, as I have to order it and wait for it to be shipped to me. There are many colors/types available, if somebody wants any TechFlex, PM me and I'll let you know what I can get.

The kits will include:
4 grounding wires
4 zip ties
2 M6 bolts
2 M6 flat washers
2 star washers
1 M6 nut


For any custom kits, or "Big 3 Upgrades", you can let me know what you'll need as far as zip ties, or bolts/nuts/washers. The "Big Three" upgrade means improving the current capacity of three cables:
1) alternator positive to battery positive.
2) battery negative to chassis
3) engine ground to chassis.
Some people replace the factory wiring; others add additional cables to the factory wiring. I added additional cables to my factory cables.

Lastly, I work 0600-1400, and my schedule is 6 days on, 2 days off. I check my e-mail in the morning before I leave for work, and I usually don't get to check it again until the evening after I get home and settle in. So if anybody sends me a PM or E-mail during my work hours, be patient, and I'll typically respond that evening. I've been selling these kits for the last few months on the other Maxima forums, and some of the members there are members here, so I can provide refs in anybody is concerned.

 

 

do you have the measurements for the 95-99 maxima big 3 upgrade??

 

I'm sorry, but I don't. Just drop a string across where you want to measure. Measure the factory negative cable from the terminal to where it attaches (should be somewhere near the bottom of the battery tray). Measure your positive cable from the positive battery terminal to the alternator positive post, and pick an engine ground and measure from that spot on the engine to the closest strut tower, or inner fender.

 

bump

 

Can you send these for a 5.5 with mounting point instructions?

 

PM sent!

 

Oh they're for 5th gens also? I was searching for grounding kits for teh i30.

 

I have measurements for 4 wire kits for the following:
03-05 Nissan 350Z
93-06 Nissan Altima (02-06 2.5 and 3.5)
95-01 Nissan Maxima
04-08 Nissan Maxima
04-07 Nissan Titan/Pathfinder/Armada ($50 shipped)
91-94 Nissan Sentra Se-R
02-05 NIssan Sentra Se-R/Spec-V
03-08 Infiniti FX 6 wire kit ($60 shipped)

I can make up any configurations needed if you know your lengths, and you can add as many wires as you'd like (price will depend on cusomization)

 

bump

 

Can you give me a price for a 95-01 Nissan Maxima along with the mounting points?

By they way, do you have the same kit available for a 95 Nissan 240SX? If so, please provide a price along with the mounting points for it as well.

 

PM sent!

 

Bump!

 

 

Can you give me a price for a 95-01 Nissan Maxima along with the mounting points

 

PM has been sent!

 

send me this as well. wouldnt it be easier to just post this info, than sending to everyone

 

 

and I would also want a price and the mounting points...

 

Alright guys, the grounding kit for the 95-01 is:
$40 shipped for a 4 wire kit in 4g
$60 shipped for a 4 wire kit in 1/0
Colors available in either gauge are red, blue, or black/dk smoke. The kits are built around the ActiveTuning kits that are no longer available, and the mounting points are the same. Nothing is pre-cut, I cut the kits custom/per order, so if you want to add any wires or customize the kit, it is not a problem.

 

Red kit is sold. I still have 1 blue, and 1 black in 4g. I can get more red, or any of the 3 colors on 1/0.

 

Thanks juanramirez67846! The black kit is sold. I still have enough blue on hand for 1 kit. I can get more wire for anything anybody needs.

 

OK guys, I just picked up some more 4g black wire. I currently have on hand:
3 - 4g black/dk smoke kits
1 - 4g blue kit

 

Thanks Saenek! Inventory updated!

2 - 4g black/dk smoke kits
1 - 4g blue kit

 

Inventory update:
All black kits are sold.
I have 1 4g blue kit ready to go.
As always, if anybody needs anything, just let me know. I can get more wire as needed!

 

Still have one 4g blue kit ready to roll!

 

Still have one blue kit, ready to go!

 

Still have a blue 4g that needs a good home! Other colors available upon request!

 

Bump!

 

Anything for a 3rd Gen?

 

I don't have any measurements on hand for a 3rd Gen. If you'd like to take some measurements and shoot them over to me, I can put a kit together for you.

 

Bump!

 

could you pm me the mounting points for the 4th gen

 

PM sent.

 

I would also like a 3rd gen set up if you get the measurements. I have a VE30 engine if that makes a difference.

 

Sorry guys, I don't have any measurements for a 3rd gen. I can PM somebody the mounting points if they want to take the measurements.