I've got a set of JWT Grand-Am Cup Series VQ35DE cams for sale. These were custom ground, and the specs are a little bit different than the normal GA series cams. They are brand new, and they're actually a pretty rare set. This profile is a slightly modified version of the original cams that were designed for the Grand-Am Cup Series cars, and B.J. Zacharias and Michiel Schuitemaker ran these, along with a few other Cup cars. These have a little more lift than the original GA cams.



They are a little more aggressive than a C8 cam, and will make monsterous power, all the way up to 8K rpm. You can use JWT's springs with these.. They will work with stock DE pistons, without clearance issues. Nice, lopey idle. They will work best in a N/A motor, but, will also work in a FI application, reasonably well. If you're looking to build a motor to make north of 300whp, then, you will not go wrong with these.

Here's a pic from a mock up that we did, on another engine (testing piston to valve clearance), showing how large the lobes are on these cams..



Again, they are brand new, and have never been run before.. I was going to use these in my B15 race car project, but, it looks like I won't be doing a built VQ like I wanted to, so, I don't need these anymore. Here are the specs..

Intake lift- .458"
Exhaust lift- .458"
Intake duration- 280*
Exhaust duration- 280*
Intake L/C- 123*
Exhaust L/C- 104*

I paid 1095.00 for them.. I'll take 775.00 shipped, anywhere in the lower 48 states.

Thanks,

Travis

 

Here's a video, which gives you a good idea as to what the idle will sound like..

http://www.youtube.com/user/Trav4011#p/u/10/BGKgkw3r4PI

Those are C8's, but, they're VERY close in terms of idle quality.

Travis

 

I have some questions.

 

Still for sale..

 

damn.. those are nice...

i think those would be a little too aggressive for a daily driver..

i am thinking of getting rid of these s2 knock-0ffs..

 

Hey, Travis. I'll take it. I will have my shop pay to you right away if you can ship it now. Call me at my cell (904) 631-5664. I need to talk to you to confirm it's the right part before you can ship it. I have an 04 350Z, non Rev-up version. I hope your cams are for the non Rev-up version. Jim Wolf made two of those same parts with different part #. One is for the Rev-up and the other one is for the non Rev. My shop is Forged Performance in Marietta, Georgia. The part I'm looking for is: A3505-N00C8. This is the same as advertised on Jim Wolf site here right? http://www.jimwolftechnology.com/cus...asp?PartID=496

Thanks.

 

Read his original post, these are not C8 cams, but similar and larger lift/duration.

 

still for sale?

 

Yes, they are still available..

 

pm'd