Hi,

I took 1 hour in the search section, no result.

I changed the ignition switch (white barrel) and the fan stop working.

1# Booth 15A checked/swapped
2# Connections checked
3# resistor is new ( anyway, it should work on 4)

--- I plugged a voltmeter on the motor connections : I have 0v on ing2. If I play with the selector (1-2-3-4), the voltage goes around 1v and drop back to 0.
--- But, the box that make the air goes to your face or feet, still working.

I have the Haynes electric diagram, and I cant figure where is the relay. if there's one...

Whats next?

Thanks

 

The relay is NOT there...

 

The blower motor relay is 1 of the 3 blue relays in the interior fuse box. IIRC it's the bottom one.

 

Nice, I think is all I need, I thought it was the flashers one.

Pretty sure this is my problem.

Thank you

 

4# Relay changed
5# Selector(1-2-3-4) checked


What is the problem?!?
Is there a other relay/fuse under the hood? I checked everything...


Thanks

 

[FIXED]

The hayness was wrong.( if you look the ignition switch plug straight). They use the car harness instead of the switch, witch they mean.

On the ignition switch theres 6 pins.

1 3 5
6 2 4

They inverse column 1 and 3 so the real thing is (if you take the white ignition plug, and not the car harness) :
5 3 1
4 2 6

Acc : 1 - 2
ON : 1 - 2 -3- 4
Start : 1 - 3 - 5 - 6

I dont remember but I think that pin 4 is ONLY for the blower power Witch mine was defective.