Maximas for Sale / Wanted Have a Maxima that you want to sell? Looking for a Maxima? Let the world know about it. Be sure to include your location in the description!

MD 1998 Maxima 5speed Black Loaded - 1700obo

Thread Tools
 
Search this Thread
 
Old Mar 14, 2011 | 09:01 AM
  #1  
phillyzj's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Dec 2005
Posts: 56
1998 Maxima 5speed Black Loaded - 1700obo

Ok, this car is back up for sale after the buyer flaked on me: http://forums.maxima.org/maximas-sal...d-1700obo.html

To update the issues that the car had when i first posted it: I found a bad wheel bearing and bad axle seal so it is no longer leaking. I've put 1000+ miles on the car since the issue and no problems. The car currently has 204500 and will go up slowly.

Info on the car from the other thread:

The car is black with tan leather, 5 speed, 204.5k miles, SE loaded with every option but heated seats and side airbags. The car has after-market Y-pipe, pace setter cat back, CE coils, receiver hitch. Newer tires, UHP All Seasons, Bridgestone RE960AS with 8k miles on them.

This car was my daily driver for the last 5 years. I bought it with 110k on it.

Everything inside the car works, air, moon-roof (no leaks), climate control, etc. The volume control on the bose HU is unresponsive at times especially when cold, but that's the only real issue with the interior.

Exterior is in decent shape for it's age other than some slight damage on the passenger front. The only real issue is the upper radiator support is tweaked. With a new rad support and probably a front fender it would look pretty good. The bumper could use a little work but could probably be repaired. It looks good from 20ft away, but wanted to note it.

Recently i replaced the front brake pads, passenger CV axle and passenger wheel bearing. I have replaced a few parts here and there over the 5 years that I've owned it but never anything out of the ordinary.

The car could also use an AC clutch bearing. I have the bearing but no time to do the work. I also have the AC bypass belt ready to go on if the bearing finally seizes. It's been making noise for about 10k miles now, hasn't gotten worse but does need to be addressed.

The main reason I'm selling it because i have 4 cars in the driveway and I'm inherriting a civic (boo) in the near future that will be my DD. I'm sure this car could last someone quite a while without a ton of work, i will miss the power/feel of it that's for sure!

price is 1700 OBO I kept it the same as before because i really need it to be gone in the near future. Feel free to make me a reasonable offer, cash speaks!

Old Pictures, i have newer ones i need to upload to my computer:






Old Mar 14, 2011 | 10:33 AM
  #2  
t6378tp's Avatar
Turbo 3.5
iTrader: (69)
 
Joined: Dec 2005
Posts: 7,785
From: Philly
So are you in philly or maryland

Also could you post or text me a pic of the damage on the fender
Old Mar 14, 2011 | 11:09 AM
  #3  
NYTooCooL's Avatar
Senior Member
iTrader: (1)
 
Joined: Mar 2010
Posts: 434
From: Atlanta
Hey I just sent you a PM, im interested.
Old Mar 14, 2011 | 11:14 AM
  #4  
phillyzj's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Dec 2005
Posts: 56
Originally Posted by t6378tp
So are you in philly or maryland

Also could you post or text me a pic of the damage on the fender
Check out picture 4 above.

I will get some better pictures up tonight.
Old Mar 14, 2011 | 11:16 AM
  #5  
phillyzj's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Dec 2005
Posts: 56
Originally Posted by t6378tp
So are you in philly or maryland

Also could you post or text me a pic of the damage on the fender
Oh and I'm in md.
Old Mar 14, 2011 | 11:31 AM
  #6  
t6378tp's Avatar
Turbo 3.5
iTrader: (69)
 
Joined: Dec 2005
Posts: 7,785
From: Philly
cool, also you have any pic's of the damage to the upper rad support and is the lower rad support rusted out or ok. what are ce coils? and last what is your zip I want to see how far alway you are
Old Mar 14, 2011 | 12:03 PM
  #7  
NYTooCooL's Avatar
Senior Member
iTrader: (1)
 
Joined: Mar 2010
Posts: 434
From: Atlanta
In Addition To THe PM

If I were to pick it up it would be on the weekend.
Old Mar 14, 2011 | 03:48 PM
  #8  
phillyzj's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Dec 2005
Posts: 56
Here are some updated cleaner pictures:






Old Mar 14, 2011 | 05:22 PM
  #9  
t6378tp's Avatar
Turbo 3.5
iTrader: (69)
 
Joined: Dec 2005
Posts: 7,785
From: Philly
pm sent
Old Mar 15, 2011 | 05:56 PM
  #10  
phillyzj's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Dec 2005
Posts: 56
pending...
Old Mar 15, 2011 | 07:27 PM
  #11  
foamerdave's Avatar
Junior Member
iTrader: (1)
 
Joined: Dec 2010
Posts: 86
From: quakertown pa
Did I see right? Has not been inspected or had emission's done since 09!!!????
Old Mar 15, 2011 | 07:48 PM
  #12  
phillyzj's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Dec 2005
Posts: 56
Originally Posted by foamerdave
Did I see right? Has not been inspected or had emission's done since 09!!!????
Ha! Technically it hasn't had PA emissions/inspection since 12/08 but if you look closer you'll see a front tag and md tags

It passed MD inspection in '09 but has not been emissions tested but no CEL's so it shouldn't be a problem.

Those stickers will come off when the windshield gets replaced (cracked).
Old Mar 16, 2011 | 09:24 AM
  #13  
Teaner's Avatar
2003 Nisan Maxima
iTrader: (191)
 
Joined: Oct 2007
Posts: 3,457
From: timonium, maryland
bump for a cool dude.
g/l with the sale buddy.
Old Mar 16, 2011 | 07:29 PM
  #14  
phillyzj's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Dec 2005
Posts: 56
Originally Posted by Teaner
bump for a cool dude.
g/l with the sale buddy.
thanks man!
Old Mar 17, 2011 | 02:38 PM
  #15  
MAX1MKA's Avatar
Member
 
Joined: Mar 2005
Posts: 233
pm me your # or text me @ 718 753 3333
Old Mar 21, 2011 | 07:25 PM
  #16  
maxspeed88's Avatar
Member
 
Joined: Aug 2008
Posts: 74
From: DMV
PM Sent
Old Mar 23, 2011 | 06:55 AM
  #17  
phillyzj's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Dec 2005
Posts: 56
Originally Posted by phillyzj
pending...
and Sold, Gone, Etc.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dennis Twohy
1st & 2nd Generation Maxima (1981-1984 and 1985-1988)
0
Oct 1, 2015 06:01 PM
niZ
Maximas for Sale / Wanted
4
Aug 7, 2015 10:18 PM
MikesChevelle
5th Generation Maxima (2000-2003)
9
Aug 7, 2015 05:57 PM
xUNIxPanther
7th Generation Maxima (2009-2015)
7
Aug 5, 2015 09:31 AM
Tanvirkamal
7th Generation Maxima (2009-2015)
4
Aug 5, 2015 01:32 AM




All times are GMT -7. The time now is 11:18 AM.