4th Generation Maxima (1995-1999) Visit the 4th Generation forum to ask specific questions or find out more about the 4th Generation Maxima.

clicking noise

Thread Tools
 
Search this Thread
 
Old Nov 27, 2011 | 11:57 AM
  #1  
Fenton3030's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 167
From: Fort Lauderdale
clicking noise

I have a "baseball card in the spokes" sound coming from the left side of my engine. you can hear it while driving and at a complete stop. it get slightly lower while driving but you can definitely still hear it.
Old Nov 27, 2011 | 12:49 PM
  #2  
comingup's Avatar
Member
 
Joined: Oct 2010
Posts: 122
From: Aurora
Left side when you are in the car or...
Old Nov 27, 2011 | 01:33 PM
  #3  
GGENIUS's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2010
Posts: 2,121
From: trenton, nj
your car has its own left and right....
Old Nov 28, 2011 | 09:58 PM
  #4  
Fenton3030's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 167
From: Fort Lauderdale
left
Old Nov 28, 2011 | 09:59 PM
  #5  
Fenton3030's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 167
From: Fort Lauderdale
left side looking into the engine bay. akternator side
Old Nov 29, 2011 | 04:29 AM
  #6  
Trini Boom's Avatar
Senior Member
iTrader: (5)
 
Joined: May 2009
Posts: 2,395
From: Brooklyn, NY
Originally Posted by Fenton3030
left side looking into the engine bay. akternator side

Sounds like timing chain rattle to me. You need to replace your tensioner.
Old Nov 29, 2011 | 06:32 AM
  #7  
clintb3astwood's Avatar
Senior Member
iTrader: (10)
 
Joined: Jul 2011
Posts: 1,371
From: Queens New york
Clicking could also be the axle
Old Nov 29, 2011 | 07:42 AM
  #8  
jholley's Avatar
Senior Member
iTrader: (13)
 
Joined: May 2008
Posts: 1,319
From: TN
Originally Posted by Fenton3030
I have a "baseball card in the spokes" sound coming from the left side of my engine. you can hear it while driving and at a complete stop. it get slightly lower while driving but you can definitely still hear it.
Originally Posted by clintb3astwood
Clicking could also be the axle
It cannot be the axle if it can be heard while at a stop.
Old Nov 29, 2011 | 08:14 AM
  #9  
Fenton3030's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 167
From: Fort Lauderdale
tensioner?? sorry for the ignorance
Old Nov 29, 2011 | 10:23 AM
  #10  
Trini Boom's Avatar
Senior Member
iTrader: (5)
 
Joined: May 2009
Posts: 2,395
From: Brooklyn, NY
Originally Posted by Fenton3030
tensioner?? sorry for the ignorance
Yes, your timing chain tensioner is on the left side when facing th front. There is two black access doors. The one that is closest to the power steering pump pulley is the location of the tensioner.
Old Nov 30, 2011 | 05:31 PM
  #11  
Fenton3030's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 167
From: Fort Lauderdale
Originally Posted by Trini Boom
Yes, your timing chain tensioner is on the left side when facing th front. There is two black access doors. The one that is closest to the power steering pump pulley is the location of the tensioner.
Ok I'll check it out fri. When I'm off thanks for the help so far
Old Nov 30, 2011 | 06:58 PM
  #12  
maxed_out_99's Avatar
Senior Member
 
Joined: May 2009
Posts: 1,352
From: ELGIN,IL
Originally Posted by Fenton3030
Ok I'll check it out fri. When I'm off thanks for the help so far
if you do replace only the tensioner (you should do guides as well but it much more work) be very careful if you drop a bolt or a piece for the tesioner, it will probably fly apart unless you put a pin in it, your royally screwed and the whole half of the engine has to come apart

just a word of advice
Old Nov 30, 2011 | 09:08 PM
  #13  
bkbajan's Avatar
Member
 
Joined: Oct 2009
Posts: 209
Originally Posted by maxed_out_99
if you do replace only the tensioner (you should do guides as well but it much more work) be very careful if you drop a bolt or a piece for the tesioner, it will probably fly apart unless you put a pin in it, your royally screwed and the whole half of the engine has to come apart

just a word of advice

where is tht 'bites nails' smiley?
lol..wht u said is a lil scary
Old Dec 1, 2011 | 12:51 PM
  #14  
maxed_out_99's Avatar
Senior Member
 
Joined: May 2009
Posts: 1,352
From: ELGIN,IL
Originally Posted by bkbajan
where is tht 'bites nails' smiley?
lol..wht u said is a lil scary
Actually takin it apart is even scarier

You can do it through the access hole it not bad just be careful try putting a piece of paper towel flat againt the socket then shove it on the bolt head that could help you from dropping it
It's just like operation
Old Dec 23, 2011 | 10:14 AM
  #15  
Fenton3030's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 167
From: Fort Lauderdale
Ok sorry about the delay in repsonse. Been mad busy/distracted with family stuff and the holidays and random stuff.

but all in all i didnt have to touch my timing chain *phheww*
Because what happened was i had no oil. MAD FAIL on my part. When checking underneath i notice massive amounts of oil all over. My oil pressure sender unit was leaking terrible. so replaced that for only 12 bucks. (yes finally a cheap fix). filled w/ oil. now cars running well again.
Old Dec 23, 2011 | 11:59 AM
  #16  
Quickywd01's Avatar
Senior Member
iTrader: (16)
 
Joined: May 2007
Posts: 3,078
From: NorthernNJ
Originally Posted by Fenton3030

but all in all i didnt have to touch my timing chain *phheww*
Because what happened was i had no oil. MAD FAIL on my part.
:eek3::eek4:
Old Dec 23, 2011 | 12:23 PM
  #17  
GGENIUS's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2010
Posts: 2,121
From: trenton, nj
youre a ****ing idiot dude. you were driving around with NO oil?? no oil sounds like no oil. when you hear that ticking, why wouldnt you check your oil? it takes less energy than posting this thread. some people are just THAT stupid.
Old Dec 23, 2011 | 12:55 PM
  #18  
Amerikaner83's Avatar
Senior Member
iTrader: (17)
 
Joined: Jul 2011
Posts: 11,386
From: WA
no oil at all? You're damned lucky, my friend.

Do these cars not have oil pressure / oil level idiot lights? Hell my 86 Honda had one...
Old Dec 23, 2011 | 11:11 PM
  #19  
Fenton3030's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jun 2009
Posts: 167
From: Fort Lauderdale
Originally Posted by Amerikaner83
no oil at all? You're damned lucky, my friend.

Do these cars not have oil pressure / oil level idiot lights? Hell my 86 Honda had one...
I am very lucky! but nah the oil light never came on.

and easy there mr. ggenius, It wasnt like i was
driving around the damn city with my engine sounding Terrible I heard it thought it was something just rattling around took it around the block and took It back home.
and I didn't chECM the oil because did an oil Change a 3 days before the noise.
just saying be easy.. Jeeze
Old Dec 24, 2011 | 12:25 AM
  #20  
infinimax96's Avatar
Senior Member
 
Joined: Jul 2011
Posts: 1,095
From: Salt Lake City, UT
Originally Posted by GGENIUS
youre a ****ing idiot dude. you were driving around with NO oil?? no oil sounds like no oil. when you hear that ticking, why wouldnt you check your oil? it takes less energy than posting this thread. some people are just THAT stupid.
Relax man. It's not like he's driving your Car without Oil. Stuff like this happens. Last time I had my car serviced by Jiffylube (years ago) they didn't screw the filter on all the way. Fell off as I was driving and dumped all the oil. Luckily nothing serious happened and I was able to just get a filter and oil to do it myself. Last time I ever let someone service any of my vehicles.

I guess you are lucky it's not the Timing Tensioner. Mine is bad and needs to be fixed but it's to damn cold outside for me to have any desire of fixing it.
Old Dec 24, 2011 | 09:49 AM
  #21  
GGENIUS's Avatar
Senior Member
iTrader: (1)
 
Joined: Sep 2010
Posts: 2,121
From: trenton, nj
hey im sure you wont make that mistake again now
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jmlee44
4th Generation Maxima (1995-1999)
8
Oct 2, 2022 02:13 PM
user 11122324
5th Generation Maxima (2000-2003)
42
Jul 18, 2022 03:35 PM
D Mason
8th Generation Maxima (2016-)
1
Jun 21, 2016 04:43 AM
uttadms31
4th Generation Maxima (1995-1999)
2
Sep 30, 2015 05:24 AM




All times are GMT -7. The time now is 08:47 AM.