I know this is an old question but it remains a big deal to so many. What is the offset for Niche Veronas 20X9 front and 20X10 rear? I was told it was 35, 40. For some reason i am struggling with that answer. Your thoughts,concern, comment hell i'll even take sly remarks at this point!

 

Are you lowered at all?

I don't know what offsets are offered, but 9" et30 is close to flush on eibachs.
Nearly flush as well with 10" et40 front or rear.

 

Lowered 1" 1/2.

 

You should have no problem there. Even running a 285 rear will be fine with no rub. The only thing you need to figure out is which size tire you want to run up front on that 9 either a 245 or 255 will be fine. Just respect the dips in the road since you are lowered and getting closer to the fender now.

 

just put mine on last night...I did 20x9 et35 all the way around...on eibachs and its flush with fenders and no rubbing...couldn't be happier

 

those offsets will work. I'm running a 20x10 squared set with an offset of +40 on Megan Racing Coilovers no rubbing issues whatsoever. 245/35/20 with a 1 1/2 front and an 1 1/4 rear drop and no fender mods. Hope that helps? The lower the number of the offset the more it pushes the wheel out pass the fender.

 

Awesome! I'm having some small mods done. When it's done I'll posts pics. Thanks for the insight.

 

My max is still in the shop but I stopped by to take a quick pic.



[I]Im having it raised just a pinch

 

Looking good bro. The gun metal ones were one of my choices of rim and sometimes i regret not buying them

 

I love those headlights who makes them?

 

Just added the gunmetal Lucerne to my car. Have the Eibach pro kit just not installed making sure it's the right choice. Love your headlights though

 

Looking good man! I hope you grab the detail brush and paint the 'Nissan' letters on front emblem in white!

 

Thanks. Those are the original headlights. I had them painted.

 

What lowering kit did you use? I bought the eibach pro from stillen and have yet to install wanting to get the ride height just right

 

You won't get that look with Eibach's.... with that ride height it looks like he's on Coilovers.

 

Ok so who makes a good coil over? And do you use them with the springs from eibach? Guess I better call my shop and see what they have to say. Got some ideas for sure

 

BC coils seem to be the go to around here. You can search for my thread on them.

 

Yes, he's 100% correct. I have coilovers. I used Ksport Kontrol pro. I want to be able to adjust them to suit my taste.

 

Wow nice car man very nice.