The E-Brake is working fine. What am I not seeing?

 

That happened to me and the problem was I was low on brake fluid. In the manual it tells you some of the problems it could be. Hopefully this is it. Good luck

 

I'll check it out, thanks.

 

Yea I had the same prob today, but put some more brake fluid in and all is good...

 

Most likely the brake fluid , but also in spect to make sure your rear brakes are not dragging.

the cable may be binding or stuck, thus keeping the light on

 

Before you add any brake fluid into your car,check that your rear brake pad's are still there.

As the pad wear's, the brake assembly thingy move's in with the pad which then causes your brake fluid level to go down which then causes the brake indicator to go on.

 

...or you might check your clearance on your parking break switch. just a thought...

 

take the light out of the indicator...


presto!!! no more light!!

 

A few cans of spray paint and no more crimson blaze !

 

*****!!!

 

Thanks for the replies fellas. The brake fluid is low.

 

my suggestion would have worked...



it was just not a good idea..

 

I still think my idea was good, paint it something nicer...like sherwood green

 

no asked for your idea or your opinion..