Maxima Forums - 90' 240sx Hatch w/ SR20DET

Maxima Forums (https://maxima.org/forums/)

- Other For Sale/Wanted (https://maxima.org/forums/other-sale-wanted-5/)

- - 90' 240sx Hatch w/ SR20DET (https://maxima.org/forums/other-sale-wanted/569793-90-240sx-hatch-w-sr20det.html)

90' 240sx Hatch w/ SR20DET

I bought the car in January as my first car, my friend knew this kid who flipped his red S13 Hatchback in which had a blacktop SR20DET motor in it, my friend had bought the SR motor in hopes to build his own 240. After stumbling upon a amazing deal for a S14 he had nothing to do with the motor so I picked up this black shell that was pretty mint for $300 without a motor. After two months of pulling the motor and doing some research we finally got the SRDET motor in. Now's where the problems began, we had trouble getting the car to start, after the first crank it didn't want to start. After we got everything straightened out I put brand new vaccum lines on it and it was doing pretty good. I put the temperaroy plates on and tried to take it for a ride, it was having trouble shifting gears. I got it around the corner and poof, it wouldn't shift into any gears with the car on and running. I'm currently still having the issue, I've been told that in order to fix the issue I must install a new clutch in which I have purchased and just needs to be installed. Some of the other issues it's having is cutting fuel, might not be enough in the tank but when you go to romp on the gas it cuts out, Walbro 455 hp fuel pumps are very cheap for these cars, they're like candy.

Aftermarkets :
Engine : SR20DET Blacktop w/ z32 MAF
Intake : GReddy (Trust) AirNX z32 MAF Intake Kit (Have Receipt)
Unknown FMIC (Bought Used) w/ Custom Intercooler Piping.
Turbo: GT2871RS w/ Longer HKS Waste Gate Actuator & Larger Waste Gate.
Transmission: SR20DET Transmission w/ Brand New Stage 1 F1 Spec Clutch (Not Currently Installed - Have Receipt)
Suspension: Front & Rear Strut Tower Bars
Exhaust: 3" Turbo-back Exhaust System

Motor History :

Now I hate when I post this becuase I have no creditability due to the fact I don't have the receipts but, according to my friend who purchased the motor and some of the folks that street race in my state the word on the street is that this motors internals are not stock, it's beating cars it shouldn't be and I know for a fact that the kid who previously owned the vehicle isn't the best at driving a standard (tis the fact I have to change the clutch). The kid purchased the motor straight from Japan and we believe that the person in Japan had built themselves a sleeper. Like I said, I hate to post things without proof but I feel its helpful.

Some issues :

As I stated in my story, I'm still having the clutch issue in which when the vehicle is on it will not shift through any gears although when the vehicle is off it will go into gears. As I was told, replace the clutch and the throwoutbearing and life is gravy, I have the clutch. If you're truely interested I'll get the clutch installed for you after you purchase/trade for the vehicle. Also, the vehicle is running pig rich, with the z32 MAF the ECU is being told that it needs more fuel to compensate for the air being forced into the motor, all that is needed is a Apex'i SAFC (Air Fuel Controller) and a little adjusting and it will run prime.

As some extras, I have a welded diff for the car, stock exhaust, and the KA Transmission Bellhousing and more then likely some other random parts. Please forgive me for sh*t pictures, did the best I could with my roomates iPhone. Car is located in Windsor Locks, CT... Bought the car for about 4300, looking to get $3500 - please let me know ASAP! I need to sell this car in a quick hurry to pay for bills. Thank you for looking! Feel free to ask any questions you'd like.

Pictures (Sorry for poor quality.)

http://i31.photobucket.com/albums/c360/sickmax/002.jpg
http://i31.photobucket.com/albums/c360/sickmax/003.jpg
http://i31.photobucket.com/albums/c360/sickmax/005.jpg
http://i31.photobucket.com/albums/c360/sickmax/001.jpg

I would say you need to put in your location per rules and you need to post better pictures if you want to sell the car.

Well my man, read the whole post and you'll notice towards the last paragraph it states the vehicle is currently located in Windsor Locks, Connecticut.

Quote:

Originally Posted by nismomaxx (Post 6584010)

Well my man, read the whole post and you'll notice towards the last paragraph it states the vehicle is currently located in Windsor Locks, Connecticut.

My bad but you still need better pictures.

bump to the top - still for sale please please please buy it~!

You paid 300 for the shell, and 4k for the motor? Or are you talking shenanigans. Your story is a bit hard to understand.

I bought the shell (ka motor and tranny), non running for $300 cash. my roomate bought the motor from a friend for $4000. Therefore I'm asking 3500 to get as close to what I paid for the vehicle as possible.

sryy bro, theres finished 240 projects all over ebay and craigslist .

With minor or no isses.

Ur gona have to drop the price...

IMO your better of to part it out

I don't have to drop the price my man, honestly I could just drop the clutch and it will be a 240 w/ SR w/ no issues at all...

Too each his own. It's worth the money asked for, without a doubt and many on zilvia would agree.

even tho the motor sells for 2500 shipped gl with the sale if you decide to part it out ill take the shell asap let me kno

this isnt some stock SR motor....2500 shipped aint gonna cut it my man

You don't even know whats really in it, it's like ebaying a box with random surprise stuff in it. Who's gonna pay for a motor that they have no clue whats inside of?

if you want this to sell i would get up some better pics on here.

I told you what I KNOW is in it..

I also know it's got a few other things but whats the point in saying if I dont have anything to prove it right?

Quote:

Originally Posted by 93altima (Post 6593094)

even tho the motor sells for 2500 shipped gl with the sale if you decide to part it out ill take the shell asap let me kno

Lol not with a gt2871

this car should be good for an easy 350+ whp with its setup pending on injectors and engine management.

This is a solid deal.

finally someone who knows what their talking about.

thank you chop.

still for sale. no lower then 3000 -

do you have any better pics of the car? If you want to e-mail them lcsoccer15@aol.com

Dam...Connecticut. Too far for me.