Other For Sale/Wanted If you have non-Maxima related items, feel free to use this forum to post them.

90' 240sx Hatch w/ SR20DET

Thread Tools
 
Search this Thread
 
Old Aug 21, 2008 | 06:51 AM
  #1  
nismomaxx's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2006
Posts: 315
90' 240sx Hatch w/ SR20DET

I bought the car in January as my first car, my friend knew this kid who flipped his red S13 Hatchback in which had a blacktop SR20DET motor in it, my friend had bought the SR motor in hopes to build his own 240. After stumbling upon a amazing deal for a S14 he had nothing to do with the motor so I picked up this black shell that was pretty mint for $300 without a motor. After two months of pulling the motor and doing some research we finally got the SRDET motor in. Now's where the problems began, we had trouble getting the car to start, after the first crank it didn't want to start. After we got everything straightened out I put brand new vaccum lines on it and it was doing pretty good. I put the temperaroy plates on and tried to take it for a ride, it was having trouble shifting gears. I got it around the corner and poof, it wouldn't shift into any gears with the car on and running. I'm currently still having the issue, I've been told that in order to fix the issue I must install a new clutch in which I have purchased and just needs to be installed. Some of the other issues it's having is cutting fuel, might not be enough in the tank but when you go to romp on the gas it cuts out, Walbro 455 hp fuel pumps are very cheap for these cars, they're like candy.



Aftermarkets :
Engine : SR20DET Blacktop w/ z32 MAF
Intake : GReddy (Trust) AirNX z32 MAF Intake Kit (Have Receipt)
Unknown FMIC (Bought Used) w/ Custom Intercooler Piping.
Turbo: GT2871RS w/ Longer HKS Waste Gate Actuator & Larger Waste Gate.
Transmission: SR20DET Transmission w/ Brand New Stage 1 F1 Spec Clutch (Not Currently Installed - Have Receipt)
Suspension: Front & Rear Strut Tower Bars
Exhaust: 3" Turbo-back Exhaust System


Motor History :

Now I hate when I post this becuase I have no creditability due to the fact I don't have the receipts but, according to my friend who purchased the motor and some of the folks that street race in my state the word on the street is that this motors internals are not stock, it's beating cars it shouldn't be and I know for a fact that the kid who previously owned the vehicle isn't the best at driving a standard (tis the fact I have to change the clutch). The kid purchased the motor straight from Japan and we believe that the person in Japan had built themselves a sleeper. Like I said, I hate to post things without proof but I feel its helpful.


Some issues :

As I stated in my story, I'm still having the clutch issue in which when the vehicle is on it will not shift through any gears although when the vehicle is off it will go into gears. As I was told, replace the clutch and the throwoutbearing and life is gravy, I have the clutch. If you're truely interested I'll get the clutch installed for you after you purchase/trade for the vehicle. Also, the vehicle is running pig rich, with the z32 MAF the ECU is being told that it needs more fuel to compensate for the air being forced into the motor, all that is needed is a Apex'i SAFC (Air Fuel Controller) and a little adjusting and it will run prime.


As some extras, I have a welded diff for the car, stock exhaust, and the KA Transmission Bellhousing and more then likely some other random parts. Please forgive me for sh*t pictures, did the best I could with my roomates iPhone. Car is located in Windsor Locks, CT... Bought the car for about 4300, looking to get $3500 - please let me know ASAP! I need to sell this car in a quick hurry to pay for bills. Thank you for looking! Feel free to ask any questions you'd like.


Pictures (Sorry for poor quality.)

http://i31.photobucket.com/albums/c360/sickmax/002.jpg
http://i31.photobucket.com/albums/c360/sickmax/003.jpg
http://i31.photobucket.com/albums/c360/sickmax/005.jpg
http://i31.photobucket.com/albums/c360/sickmax/001.jpg
Old Aug 21, 2008 | 05:59 PM
  #2  
ramberg's Avatar
GrandPa
iTrader: (29)
 
Joined: Feb 2004
Posts: 3,914
From: Brooklyn, NY & Plantation, Fl.
I would say you need to put in your location per rules and you need to post better pictures if you want to sell the car.
Old Aug 21, 2008 | 06:37 PM
  #3  
nismomaxx's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2006
Posts: 315
Well my man, read the whole post and you'll notice towards the last paragraph it states the vehicle is currently located in Windsor Locks, Connecticut.
Old Aug 22, 2008 | 04:53 AM
  #4  
ramberg's Avatar
GrandPa
iTrader: (29)
 
Joined: Feb 2004
Posts: 3,914
From: Brooklyn, NY & Plantation, Fl.
Originally Posted by nismomaxx
Well my man, read the whole post and you'll notice towards the last paragraph it states the vehicle is currently located in Windsor Locks, Connecticut.
My bad but you still need better pictures.
Old Aug 25, 2008 | 10:23 AM
  #5  
nismomaxx's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2006
Posts: 315
bump to the top - still for sale please please please buy it~!
Old Aug 25, 2008 | 08:17 PM
  #6  
nismos14's Avatar
§è~® f®ÈÄk
iTrader: (56)
 
Joined: Feb 2003
Posts: 17,505
From: NJ
You paid 300 for the shell, and 4k for the motor? Or are you talking shenanigans. Your story is a bit hard to understand.
Old Aug 25, 2008 | 09:27 PM
  #7  
nismomaxx's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2006
Posts: 315
I bought the shell (ka motor and tranny), non running for $300 cash. my roomate bought the motor from a friend for $4000. Therefore I'm asking 3500 to get as close to what I paid for the vehicle as possible.
Old Aug 28, 2008 | 06:20 PM
  #8  
maxspeed96CT's Avatar
The original VQ...
iTrader: (9)
 
Joined: Feb 2003
Posts: 4,804
From: CT
sryy bro, theres finished 240 projects all over ebay and craigslist .

With minor or no isses.

Ur gona have to drop the price...

IMO your better of to part it out
Old Aug 28, 2008 | 07:07 PM
  #9  
nismomaxx's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2006
Posts: 315
I don't have to drop the price my man, honestly I could just drop the clutch and it will be a 240 w/ SR w/ no issues at all...

Too each his own. It's worth the money asked for, without a doubt and many on zilvia would agree.
Old Aug 28, 2008 | 08:00 PM
  #10  
93altima's Avatar
Turbo 4th Gen
iTrader: (5)
 
Joined: Nov 2007
Posts: 2,041
From: Philla
even tho the motor sells for 2500 shipped gl with the sale if you decide to part it out ill take the shell asap let me kno
Old Aug 28, 2008 | 10:07 PM
  #11  
nismomaxx's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2006
Posts: 315
this isnt some stock SR motor....2500 shipped aint gonna cut it my man
Old Aug 29, 2008 | 06:11 AM
  #12  
nismos14's Avatar
§è~® f®ÈÄk
iTrader: (56)
 
Joined: Feb 2003
Posts: 17,505
From: NJ
You don't even know whats really in it, it's like ebaying a box with random surprise stuff in it. Who's gonna pay for a motor that they have no clue whats inside of?
Old Aug 29, 2008 | 06:49 AM
  #13  
liqidvenom's Avatar
brotherhood of tq
iTrader: (6)
 
Joined: Jul 2003
Posts: 8,849
if you want this to sell i would get up some better pics on here.
Old Aug 29, 2008 | 07:57 AM
  #14  
nismomaxx's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2006
Posts: 315
I told you what I KNOW is in it..

I also know it's got a few other things but whats the point in saying if I dont have anything to prove it right?
Old Aug 29, 2008 | 08:06 AM
  #15  
AceofSpds's Avatar
wat
iTrader: (4)
 
Joined: Aug 2005
Posts: 2,480
From: Mobile, AL
Originally Posted by 93altima
even tho the motor sells for 2500 shipped gl with the sale if you decide to part it out ill take the shell asap let me kno
Lol not with a gt2871

this car should be good for an easy 350+ whp with its setup pending on injectors and engine management.

This is a solid deal.
Old Aug 30, 2008 | 07:33 AM
  #16  
nismomaxx's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2006
Posts: 315
finally someone who knows what their talking about.

thank you chop.

still for sale. no lower then 3000 -
Old Sep 8, 2008 | 09:58 AM
  #17  
kymax96's Avatar
Junior Member
 
Joined: Jan 2008
Posts: 26
do you have any better pics of the car? If you want to e-mail them lcsoccer15@aol.com
Old Oct 7, 2008 | 07:56 AM
  #18  
nismomaxx's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2006
Posts: 315
bump! still for sale. more pictures below.

price is still 3000 or trade me for a quad/dirtbike of close to equal value!

http://i31.photobucket.com/albums/c360/sickmax/002.jpg
http://i31.photobucket.com/albums/c360/sickmax/003.jpg
http://i31.photobucket.com/albums/c360/sickmax/005.jpg
http://i31.photobucket.com/albums/c360/sickmax/001.jpg
http://i31.photobucket.com/albums/c3...x/IMG_0156.jpg
http://i31.photobucket.com/albums/c3...x/IMG_0157.jpg
http://i31.photobucket.com/albums/c3...x/IMG_0158.jpg
http://i31.photobucket.com/albums/c3...x/IMG_0159.jpg
http://i31.photobucket.com/albums/c3...x/IMG_0163.jpg
http://i31.photobucket.com/albums/c3...x/IMG_0165.jpg
Old Oct 7, 2008 | 01:30 PM
  #19  
vinco's Avatar
Member
iTrader: (3)
 
Joined: Feb 2008
Posts: 284
From: Hot Springs, AR
Dam...Connecticut. Too far for me.
Old Oct 7, 2008 | 06:02 PM
  #20  
nismomaxx's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2006
Posts: 315
Yeahh. Lol.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
aw11power
Supercharged/Turbocharged
161
Oct 10, 2021 04:57 AM
Ben2003GLE
5th Generation Maxima (2000-2003)
31
Jul 17, 2016 08:13 AM
Romeo
General Maxima Discussion
31
Jun 3, 2001 11:07 PM
MightyMax
General Maxima Discussion
8
Feb 14, 2001 04:50 PM
Slickismax
General Maxima Discussion
3
Nov 3, 2000 09:54 AM




All times are GMT -7. The time now is 01:32 AM.