F/S 2000 Nissan Skyline GT-R V-Spec (Helping a friend)
F/S 2000 Nissan Skyline GT-R V-Spec (Helping a friend)
Helping a friend by passing this on...
The time has come for me to part ways with a car that has made me damn happy in the short time I've owned it.
Up for sale is my 2000 Nissan Skyline GT-R V-Spec
Mods:
Custom intake manifold
Custom throttle body
Custom intercooler piping
Custom orange/red-ish powder coated valve covers (story on that after)
Custom red leather rear seats and inserts on doors
Custom catch can setup
Nismo twin-plate Coppermix clutch
Nismo clutch slave cylinder (not installed, but comes with)
Nismo gauge cluster (black)
Nismo clutch line
Nismo Weldina exhaust
Megan racing downpipe
GT Spec front strut bar
GReddy Type-S coilovers
GReddy Type-R BOV
Grex 256/256 cams
Grex valve springs/retainers
Solid lifters
Cryo-treated transmission input shaft (story on that after)
Volk SF-Challenge wheels 19x9.5 +15
Bridgestone Potenza S02 Pole Position tires 275-35/19
Alpine CD player
Tein bonnet dampers
Works Best quick release steering wheel hub
Works Best steering wheel
Apex'i PowerFC w/ Commander and D-Jetro (sp?) so it is now MAF-less and runs good.
I bought the car April 2009, with dreams and aspirations to build it into an amazing street car. Three days later, I took it to the local drag strip and ended up snapping the transmission input shaft at around 800ft (~244m) down the 1320ft (~402m) track, and still coasted to a 13.5 @ 88mph. I was never able to get a full pass out of the car. A few days later, the teardown began to see what exactly caused the issue. It turns out the previous owner had a shop do the work to the car and they didn't exactly seem to know what they were doing. The transmission bellhousing was held to the engine block, but missing 3-4 bolts. The clutch that was in it was an Exedy triple plate solid hub. That was a big mistake. So after finally sourcing all of the replacement parts (shaft, clutch, miscellaneous gaskets and such), my good friend and highly trusted mechanic took a look further into the car and found a few other things wrong with it. It was a cob job, not going to lie to you. He fixed everything, and added a catch can as well to battle an oil leak out of the crappy breather filter that was installed. He did an impeccable job, everything was/is perfect again.
While it was apart, I decided to go with a more streetable clutch, and after much research, decided the Nismo twin-plate Coppermix was just what I was looking for. Great clutch with great reliability. I also decided to add in a Nismo clutch line and Nismo clutch slave cylinder as well. I replaced every gasket that he found to have any sort of leak or imperfection that he could find. I also put in the Nismo gauge cluster, because I planned on having the car rev higher than the 8200-8400rpm it currently does. The car came with Bride seats, and I solt them immediately, as I'm a fat dude. Fat dudes don't fit in Bride seats. I ordered a set of Recaro Sport Toplines (heated, fanned, power recline, lumbar support), that will be included if the car goes for my asking price. Other wise, a set of Corbeau reclining seats will be in the car.
Exterior, the car is mint. No issues whatsoever except that it's missing one of the grill covers for one of the holes in the bumper (you'll see in pics)
Interior, the car is spotless. No stains anywhere, and the car will have brand new seats in it upon delivery.
The car has under 18,000mi (~29,000km) on it. I will include the original gauge cluster in it as well just so you can see. It runs perfectly fine, just a little rich though, as I haven't gotten it re-tuned since I got it all back together.
I've had the car 6 short months, with the car seeing the road maybe 10 times in my ownership, otherwise it's been in a covered garage. Here in the US, the car is a real head turner. It was fun to drive, and an interesting experience to say the least. I may regret selling it, who knows, but the car does need to go. It has a NYS title, VIN available upon request through PM's.
I am willing to ship the car anywhere in the world, but the buyer is responsible for it all, except for me possibly bringing it to a port as far away as NYC.
Asking price: $68,000 USD or 45,745 EUR or 41,680 GBP or $70,700 CAD or 6,179,925 JPY or $74,200 AUD.
All prices are as of 10/19/2009 exchange rates and rounded up/down as I see fit. They may go up or down depending on the exchange rate based on ww.xe.com . Payment is accepted in the form of wire transfer only, unless here in the USA, in which certified bank checks from a nationally known bank will be accepted. Car will stay in my possession until payments are fully cleared.
Please contact me @ cosseyowns@gmail.com
-Chris
Up for sale is my 2000 Nissan Skyline GT-R V-Spec
Mods:
Custom intake manifold
Custom throttle body
Custom intercooler piping
Custom orange/red-ish powder coated valve covers (story on that after)
Custom red leather rear seats and inserts on doors
Custom catch can setup
Nismo twin-plate Coppermix clutch
Nismo clutch slave cylinder (not installed, but comes with)
Nismo gauge cluster (black)
Nismo clutch line
Nismo Weldina exhaust
Megan racing downpipe
GT Spec front strut bar
GReddy Type-S coilovers
GReddy Type-R BOV
Grex 256/256 cams
Grex valve springs/retainers
Solid lifters
Cryo-treated transmission input shaft (story on that after)
Volk SF-Challenge wheels 19x9.5 +15
Bridgestone Potenza S02 Pole Position tires 275-35/19
Alpine CD player
Tein bonnet dampers
Works Best quick release steering wheel hub
Works Best steering wheel
Apex'i PowerFC w/ Commander and D-Jetro (sp?) so it is now MAF-less and runs good.
I bought the car April 2009, with dreams and aspirations to build it into an amazing street car. Three days later, I took it to the local drag strip and ended up snapping the transmission input shaft at around 800ft (~244m) down the 1320ft (~402m) track, and still coasted to a 13.5 @ 88mph. I was never able to get a full pass out of the car. A few days later, the teardown began to see what exactly caused the issue. It turns out the previous owner had a shop do the work to the car and they didn't exactly seem to know what they were doing. The transmission bellhousing was held to the engine block, but missing 3-4 bolts. The clutch that was in it was an Exedy triple plate solid hub. That was a big mistake. So after finally sourcing all of the replacement parts (shaft, clutch, miscellaneous gaskets and such), my good friend and highly trusted mechanic took a look further into the car and found a few other things wrong with it. It was a cob job, not going to lie to you. He fixed everything, and added a catch can as well to battle an oil leak out of the crappy breather filter that was installed. He did an impeccable job, everything was/is perfect again.
While it was apart, I decided to go with a more streetable clutch, and after much research, decided the Nismo twin-plate Coppermix was just what I was looking for. Great clutch with great reliability. I also decided to add in a Nismo clutch line and Nismo clutch slave cylinder as well. I replaced every gasket that he found to have any sort of leak or imperfection that he could find. I also put in the Nismo gauge cluster, because I planned on having the car rev higher than the 8200-8400rpm it currently does. The car came with Bride seats, and I solt them immediately, as I'm a fat dude. Fat dudes don't fit in Bride seats. I ordered a set of Recaro Sport Toplines (heated, fanned, power recline, lumbar support), that will be included if the car goes for my asking price. Other wise, a set of Corbeau reclining seats will be in the car.
Exterior, the car is mint. No issues whatsoever except that it's missing one of the grill covers for one of the holes in the bumper (you'll see in pics)
Interior, the car is spotless. No stains anywhere, and the car will have brand new seats in it upon delivery.
The car has under 18,000mi (~29,000km) on it. I will include the original gauge cluster in it as well just so you can see. It runs perfectly fine, just a little rich though, as I haven't gotten it re-tuned since I got it all back together.
I've had the car 6 short months, with the car seeing the road maybe 10 times in my ownership, otherwise it's been in a covered garage. Here in the US, the car is a real head turner. It was fun to drive, and an interesting experience to say the least. I may regret selling it, who knows, but the car does need to go. It has a NYS title, VIN available upon request through PM's.
I am willing to ship the car anywhere in the world, but the buyer is responsible for it all, except for me possibly bringing it to a port as far away as NYC.
Asking price: $68,000 USD or 45,745 EUR or 41,680 GBP or $70,700 CAD or 6,179,925 JPY or $74,200 AUD.
All prices are as of 10/19/2009 exchange rates and rounded up/down as I see fit. They may go up or down depending on the exchange rate based on ww.xe.com . Payment is accepted in the form of wire transfer only, unless here in the USA, in which certified bank checks from a nationally known bank will be accepted. Car will stay in my possession until payments are fully cleared.
Please contact me @ cosseyowns@gmail.com
-Chris
I'm with you on that if I ever had one of those... I can only dream
Sweet ride and gl with the sale. OT but, where in NY state are you guys located? My g/f lives a few towns away from Schenectady and I am upstate almost every other weekend.
im amazed he got it, up here you can get anything 1994 or older like candy, so theres tons of R32 JDM and JDM 240sx, and now 1994 WRX like candy.
in November's Import Tuner, theres a paragraph where a guy found a RHD R34 at a auction in Cali and it looked like the stolen one from fast and furious, he asked the guys about it and they said it would have to be crushed ASAP and i guess the popo are looking into it to see if its the stolen one
anyhow, props for him to getting it into the US, havent seen a R34 myself here in Canada even, i see like 10-15 JDM R32 a day and 2-3 EVO's though
in November's Import Tuner, theres a paragraph where a guy found a RHD R34 at a auction in Cali and it looked like the stolen one from fast and furious, he asked the guys about it and they said it would have to be crushed ASAP and i guess the popo are looking into it to see if its the stolen one
anyhow, props for him to getting it into the US, havent seen a R34 myself here in Canada even, i see like 10-15 JDM R32 a day and 2-3 EVO's though
Clean white R32 and dark blue R34>all
Thread
Thread Starter
Forum
Replies
Last Post
jholley
5th Generation Maxima (2000-2003)
2
Aug 11, 2015 09:38 AM
Team STILLEN
Autocrossing and Road Course Racing
0
Aug 10, 2015 04:29 PM